Mirror/ardupilot
5
0
Fork 0
mirror of https://github.com/ArduPilot/ardupilot synced 2025-01-08 08:58:29 -04:00
Code Issues Packages Projects Releases Wiki Activity
8,985 Commits 71 Branches 510 Tags 771 MiB
43ffe91546
Commit Graph

8985 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Andrew Tridgell
a587b1140a AP_HAL: added voltage_latest() interface 
this will be used for reading the 5V rail
 2013-09-12 13:23:04 +10:00
Andrew Tridgell
4f33e4e114 autotest: fixed handling for wiki and xml generation 2013-09-12 10:01:30 +10:00
Andrew Tridgell
0c8d56632e Plane: fixed SR0 and SR3 autodocs 2013-09-12 09:53:24 +10:00
Andrew Tridgell
4545445850 Copter: fixed SR0 and SR3 autodocs 2013-09-12 09:53:13 +10:00
Andrew Tridgell
bfd61fec15 param_metadata: support .pde files for parameter autodocs 2013-09-12 09:51:59 +10:00
Andrew Tridgell
d20644e664 Rover: added SR0 and SR3 stream rates to auto docs 2013-09-12 09:51:36 +10:00
Andrew Tridgell
3d6e76a050 Rover: changed default L1 period to 11 2013-09-12 07:48:57 +10:00
Andrew Tridgell
b7e54bd463 AP_Airspeed: reduce speed of autocal 
it was responding to noise too rapidly

Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
 2013-09-12 07:48:57 +10:00
Andrew Tridgell
2171f2a80b AP_SteerController: move scaler onto integrator input 
this should make integrator scale with speed

Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
 2013-09-12 07:48:57 +10:00
Randy Mackay
a68966e077 Copter: integrate sprayer pump test 2013-09-11 17:05:25 +09:00
Randy Mackay
5e7a6b3b98 Sprayer: add pump min rate and test 
If pump is enabled while copter is disarmed it will spray as if
travelling at 1m/s
 2013-09-11 17:04:58 +09:00
Randy Mackay
152f5da880 Copter: integrate AP_Notify batt and radio failsafes 2013-09-11 14:36:38 +09:00
Randy Mackay
b3c636dfa3 AP_Notify: add radio and battery failsafe 
radio and battery failsafe are slow flashing yellow
pre-arm check failure changed to double flashing yellow
 2013-09-11 14:36:05 +09:00
Randy Mackay
8f16dbf95e PX4: start rgbled driver 2013-09-11 13:15:35 +09:00
Randy Mackay
3abdf14e51 Build: sort .gitignore alphabetically, add .bin 2013-09-11 13:15:19 +09:00
Randy Mackay
9095c6ab30 Copter: update Release notes for AC3.1-rc1 again 2013-09-11 09:51:47 +09:00
Randy Mackay
8e0cacad39 Copter: disable low battery events when usb connected 2013-09-09 21:27:05 +09:00
Kevin Hester
240a9ccaf0 AC: if vehicle is !flying show hb state as MAV_STATE_STANDBY 
This helps GCSes determine the appropriate UI for the current vehicle
mode.
 2013-09-09 20:51:54 +09:00
Randy Mackay
43c4ba304d Copter: update Release Notes for AC3.1-rc1 2013-09-09 20:04:30 +09:00
Andrew Tridgell
341dca4dfe AP_L1_Control: added set_default_period() 
used by the rover code
 2013-09-09 19:55:53 +10:00
Andrew Tridgell
0c37bcbb10 autotest: don't show console in autotest 2013-09-09 19:55:38 +10:00
Andrew Tridgell
35519b9298 autotest: update rover default parms 2013-09-09 19:55:25 +10:00
Andrew Tridgell
983ca71796 Rover: moved override of defaults to load_parameters() 2013-09-09 19:55:11 +10:00
Andrew Tridgell
fc1228eb48 Rover: set a default filter frequency of 5Hz 
this should help rovers on rough surfaces
 2013-09-09 19:19:11 +10:00
Andrew Tridgell
7b3a674d66 AP_InertialSensor: added set_default_filter() method 2013-09-09 19:18:52 +10:00
Andrew Tridgell
ad9a605603 autotest: removed APM1-1280 from rover build 
it no longet fits with the new L1 controller
 2013-09-09 19:14:39 +10:00
Andrew Tridgell
229841052a AP_Compass_PX4: removed MAGIOCSSAMPLERATE call 2013-09-09 18:04:41 +10:00
Andrew Tridgell
d000cd2320 Rover: switched to new steering controller 
this uses a steering rate controller, based upon the planes roll
controller
 2013-09-09 18:04:41 +10:00
Andrew Tridgell
c044385fff AP_AHRS: added groundspeed() method 
this gives ground speed in m/s from GPS
 2013-09-09 18:04:41 +10:00
Andrew Tridgell
0918393fed APM_Control: fixed some documentation typos 2013-09-09 18:04:40 +10:00
Andrew Tridgell
7413c15959 APM_Control: added a ground vehicle steering controller 
this will be used both for the rover code, and for ground steering of
a plane on takeoff
 2013-09-09 18:04:40 +10:00
Andrew Tridgell
887942471e Rover: use Y accel computed from gyro and velocity 
this should be less susceptible to noise and attitude errors,
hopefully leading to better learning
 2013-09-09 18:04:40 +10:00
Andrew Tridgell
ecccc05eed Rover: added STEERING_LEARN parameter 
when enabled (set to 1) it will learn TURN_CIRCLE based on the
demanded and actual lateral acceleration
 2013-09-09 18:04:40 +10:00
Andrew Tridgell
f5d20b4085 SITL: reduce the minimum accel and gyro noise 
on APM2 and PX4 we do a lot of smoothing of accels and gyros, so a 2
bit error isn't a good representation of the min noise
 2013-09-09 18:04:40 +10:00
Andrew Tridgell
6c2f623df2 Rover: send y accel in m/s/s as nav_pitch 
this allows for easier tuning in MissionPlanner
 2013-09-09 18:04:40 +10:00
Andrew Tridgell
7789f0d133 Rover: don't use throttle_nudge in steering mode 2013-09-09 18:04:40 +10:00
Andrew Tridgell
97ed733ada Rover: use L1 controller for navigation 
this uses the AP_L1_Control library for rover navigation
 2013-09-09 18:04:40 +10:00
Andrew Tridgell
396c4f30d2 AP_InertialSensor_PX4: don't set QUEUEDEPTH 
the default of 2 samples is fine
 2013-09-09 18:04:40 +10:00
Andrew Tridgell
db14a85fc5 AP_Compass: added more debugging to AP_Compass_PX4 driver 
this helps debug compass initialisation issues
 2013-09-09 18:04:40 +10:00
Andrew Tridgell
8b80beadc4 PX4: make FMUv2 identify itself differently 
so we can tell which is which in logs
 2013-09-09 18:04:40 +10:00
Randy Mackay
1d55fa6818 Copter: add arm check of GPS hdop when in Loiter 2013-09-09 14:03:40 +09:00
Randy Mackay
1abb439051 Copter: move acro's var initialisation to roll-pitch and yaw controller initialisation 2013-09-09 10:54:13 +09:00
Randy Mackay
942ba0476b Copter: remove manual_attitude and throttle flags 2013-09-09 10:44:53 +09:00
Randy Mackay
b7579bb028 Copter: move init of global nav variables to set_nav_mode 2013-09-09 10:37:44 +09:00
Randy Mackay
4842335a24 Copter: add #include for AC_Sprayer 2013-09-09 10:18:06 +09:00
Randy Mackay
13ee672eae Copter: remove unused get_acro_pitch and roll 2013-09-09 10:11:23 +09:00
Andrew Tridgell
f6688582a6 Plane: added FENCE_ACTION=3 behaviour 
this makes it safer to enable the geofence as a receiver failsafe
mode. It retains manual throttle control, so if it triggers on the
ground due to the receiver losing signal from the transmitter then the
throttle can be kept low, preventing an unexpected takeoff.
 2013-09-08 07:31:10 +10:00
Andrew Tridgell
7328369b91 GCS_MAVLink: added FENCE_ACTION_GUIDED_THR_PASS 2013-09-08 07:29:30 +10:00
Andrew Tridgell
ff0f6bcd42 AP_InertialSensor: fixed example build 2013-09-07 21:03:59 +10:00
Andrew Tridgell
905c84bb4c PX4: move PX4IO update to before any sensors start 
this seems to make the update much more reliable, possibly as it
avoids an interrupt load from l3gd20 driver
 2013-09-07 17:39:51 +10:00