Commit Graph

19128 Commits

Author SHA1 Message Date
Paul Riseborough 59df23bc0f AP_NavEKF: Reduce EKF health pre-arm check false positives 2015-11-02 17:46:52 +09:00
Paul Riseborough aa14de9d39 AP_NavEKF2: Fix failure to start mag cal due to gyro noise
Vibration in the 400Hz delta angles could cause the angular rate condition check for in-flight magnetic field alignment to fail.
The symptons were failure to start magnetic field learning as expected when EK2_MAG_CAL=3 was set.
2015-11-02 14:12:17 +11:00
Paul Riseborough 2ebce110b7 AP_NavEKF2: Explicitly define plane build type for default parameters
Use Copter parameters if build type is unknown
2015-11-02 14:12:17 +11:00
Paul Riseborough 7ed36d8e65 AP_AHRS: Enable pre-flight GPS check status reporting for EKF2 2015-11-02 14:12:17 +11:00
Paul Riseborough b6d63d4b4e AP_NavEKF2: Fix reporting of pre-flight GPS checks
Re-order checks so that that less important messages are not hidden when the 40 character buffer overflows
Add required output methods
2015-11-02 14:12:16 +11:00
Paul Riseborough 7bd61a484c AP_NavEKF2: Faster initial accel bias learning 2015-11-02 14:12:16 +11:00
Andrew Tridgell f1bcfa9d49 PX4: update to latest FMUv2 bootloader 2015-10-31 16:06:22 +11:00
Paul Riseborough b15bf3243e AP_NavEKF2: Remove potential for division by zero 2015-10-30 15:34:26 +09:00
Paul Riseborough 5533a9a149 AP_NavEKF2: Add improved health monitoring when using simple compass yaw fusion 2015-10-30 15:34:23 +09:00
Paul Riseborough f539b597a3 AP_NavEKF2: Improve initialisation of magnetic field learning
Use the more robust, but less accurate compass heading fusion up to 5m altitude
Wait for the magnetometer data fusion time offset to be correct before using data to reset states
Don't reset magnetic field states if the vehicle is rotating rapidly as timing offsets will produce large errors
When doing the yaw angle reset, apply the reset increment to all quaternions stored in the output buffer to avoid transients produced by yaw rotations and the 0.25 second fusion time horizon offset.
Only do the one yaw and mag reset at 5m, not two at 1.5 and 5.0m
Always re-do the yaw and mag reset when leaving the ground.
2015-10-30 15:34:20 +09:00
Paul Riseborough 844ed95718 AP_NavEKF2: Add method to rotate output quaternion history 2015-10-30 15:34:17 +09:00
Paul Riseborough a1e32d71ec AP_NavEKF: Prevent large rotation rates corrupting the in-flight mag reset 2015-10-30 15:34:14 +09:00
Lucas De Marchi 1ce03c53a6 AP_Curve: remove wrong comment about PSTR
Not being able to leave the instantiation in ther header is not because
of PSTR issues, but basically because the instantiation needs to be in a
compilation unit, not in the header itself.
2015-10-30 14:35:49 +09:00
Lucas De Marchi 9203e2b929 AP_Common: remove PSTR definition 2015-10-30 14:35:48 +09:00
Lucas De Marchi 92016e9229 AP_Progmem: remove dead code
The only thing from AP_Progmem that's still used are the pgm_read_*
function and there's no support for AVR anymore. So remove the dead code
and use a single header to contain that inline functions.
2015-10-30 14:35:47 +09:00
Lucas De Marchi 79230bc68d APMrover2: fix passing AP_Float to printf
Call get() to return the contained float value.
2015-10-30 14:35:46 +09:00
Lucas De Marchi 68bef1ec64 AP_Param: fix wrong printf format for printf
"%S" is used for wide string, but we are passing a char*. Use lowercase
in this case to remove warnings like this:

libraries/AP_InertialSensor/AP_InertialSensor.cpp: In member function
'bool AP_InertialSensor::calibrate_accel(AP_InertialSensor_UserInteract*, float&, float&)':
libraries/AP_InertialSensor/AP_InertialSensor.cpp:620:61: warning:
format '%S' expects argument of type 'wchar_t*', but argument 3 has type 'const char*' [-Wformat=]
                 "Place vehicle %S and press any key.\n", msg);
                                                             ^
2015-10-30 14:35:45 +09:00
Lucas De Marchi c3fe71a0d5 APMrover2: fix wrong printf format for printf
"%S" is used for wide string, but we are passing a char*. Use lowercase
in this case to remove warnings like this:

libraries/AP_InertialSensor/AP_InertialSensor.cpp: In member function
'bool AP_InertialSensor::calibrate_accel(AP_InertialSensor_UserInteract*, float&, float&)':
libraries/AP_InertialSensor/AP_InertialSensor.cpp:620:61: warning:
format '%S' expects argument of type 'wchar_t*', but argument 3 has type 'const char*' [-Wformat=]
                 "Place vehicle %S and press any key.\n", msg);
                                                             ^
2015-10-30 14:35:44 +09:00
Lucas De Marchi cfe6e209db ArduPlane: fix wrong printf format for printf
"%S" is used for wide string, but we are passing a char*. Use lowercase
in this case to remove warnings like this:

libraries/AP_InertialSensor/AP_InertialSensor.cpp: In member function
'bool AP_InertialSensor::calibrate_accel(AP_InertialSensor_UserInteract*, float&, float&)':
libraries/AP_InertialSensor/AP_InertialSensor.cpp:620:61: warning:
format '%S' expects argument of type 'wchar_t*', but argument 3 has type 'const char*' [-Wformat=]
                 "Place vehicle %S and press any key.\n", msg);
                                                             ^
2015-10-30 14:35:43 +09:00
Lucas De Marchi d2a259cef0 DataFlash: fix wrong printf format for printf
"%S" is used for wide string, but we are passing a char*. Use lowercase
in this case to remove warnings like this:

libraries/AP_InertialSensor/AP_InertialSensor.cpp: In member function
'bool AP_InertialSensor::calibrate_accel(AP_InertialSensor_UserInteract*, float&, float&)':
libraries/AP_InertialSensor/AP_InertialSensor.cpp:620:61: warning:
format '%S' expects argument of type 'wchar_t*', but argument 3 has type 'const char*' [-Wformat=]
                 "Place vehicle %S and press any key.\n", msg);
                                                             ^
2015-10-30 14:35:42 +09:00
Lucas De Marchi bdd1d5e9d4 AP_Menu: fix wrong printf format for printf
"%S" is used for wide string, but we are passing a char*. Use lowercase
in this case to remove warnings like this:

libraries/AP_InertialSensor/AP_InertialSensor.cpp: In member function
'bool AP_InertialSensor::calibrate_accel(AP_InertialSensor_UserInteract*, float&, float&)':
libraries/AP_InertialSensor/AP_InertialSensor.cpp:620:61: warning:
format '%S' expects argument of type 'wchar_t*', but argument 3 has type 'const char*' [-Wformat=]
                 "Place vehicle %S and press any key.\n", msg);
                                                             ^
2015-10-30 14:35:41 +09:00
Lucas De Marchi 62ba8266ef AP_InertialSensor: fix wrong printf format for printf
"%S" is used for wide string, but we are passing a char*. Use lowercase
in this case to remove warnings like this:

libraries/AP_InertialSensor/AP_InertialSensor.cpp: In member function
'bool AP_InertialSensor::calibrate_accel(AP_InertialSensor_UserInteract*, float&, float&)':
libraries/AP_InertialSensor/AP_InertialSensor.cpp:620:61: warning:
format '%S' expects argument of type 'wchar_t*', but argument 3 has type 'const char*' [-Wformat=]
                 "Place vehicle %S and press any key.\n", msg);
                                                             ^
2015-10-30 14:35:40 +09:00
Lucas De Marchi b02661b478 APMrover2: fix wrong printf format for 32 bits
Heading is a 32 bits value, so use %d.
2015-10-30 14:35:39 +09:00
Lucas De Marchi d40349d6ae ArduPlane: fix wrong printf format for 32 bits
Heading is a 32 bits value, so use %d.
2015-10-30 14:35:38 +09:00
Lucas De Marchi f4e71affa1 ArduCopter: fix wrong printf format for 32 bits
Heading is a 32 bits value, so use %u.
2015-10-30 14:35:36 +09:00
Lucas De Marchi a6fd94c6fe ArduPlane: fix wrong printf format for 32 bits
"micros() - before" doesn't return a long value. Use "%u".
2015-10-30 14:35:35 +09:00
Lucas De Marchi e9b6c76454 ArduCopter: fix wrong printf format for 32 bits
"micros() - before" doesn't return a long value. Use "%u".
2015-10-30 14:35:34 +09:00
Lucas De Marchi c397e550e2 ArduCopter: fix warning due to wrong type
"%s" expects a string. This works since the string in the struct is the
first member so it's harmless.
2015-10-30 14:35:33 +09:00
Lucas De Marchi 5244559010 Minimize AP_Progmem.h includes
Most of AP_Progmem is already gone so we can stop including it in most
of the places. The only places that need it are the ones using
pgm_read_*() APIs.

In some cases the header needed to be added in the .cpp since it was
removed from the .h to reduce scope. In those cases the headers were
also reordered.
2015-10-30 14:35:32 +09:00
Lucas De Marchi a65c98485c AP_HAL: UARTDriver: remove _P() variants
They aren't used anymore so remove.
2015-10-30 14:35:31 +09:00
Lucas De Marchi 1b07dabeb7 Replace prog_char and prog_char_t with char
prog_char and prog_char_t are now the same as char on supported
platforms. So, just change all places that use them and prefer char
instead.

AVR-specific places were not changed.
2015-10-30 14:35:30 +09:00
Lucas De Marchi b52d1cfabb DataFlash: remove DataFlash.Log_Write_Message_P() 2015-10-30 14:35:29 +09:00
Lucas De Marchi 4ab9821624 Replace use of Log_Write_Message_P() with Log_Write_Message() 2015-10-30 14:35:28 +09:00
Lucas De Marchi 132303db4b AP_InertialSensor: use printf() rather than _printf_P() 2015-10-30 14:35:27 +09:00
Lucas De Marchi 2556fc8dbe BetterStream: use common macro for printf formatting
Since this needs an additional header, also put them in correct order.
2015-10-30 14:35:26 +09:00
Lucas De Marchi 20c6ffc5e3 Replace use of UARTDriver::printf_P() with UARTDriver::printf()
This also starts to show warnings on places that were already using
wrong printf format strings.
2015-10-30 14:35:25 +09:00
Lucas De Marchi 7ceffb1e2b Replace use of vprintf_P() with vprintf() 2015-10-30 14:35:23 +09:00
Lucas De Marchi 6f4904189b Replace use of println_P() with println() 2015-10-30 14:35:22 +09:00
Lucas De Marchi a964ac38ec Replace use of print_P() with print() 2015-10-30 14:35:21 +09:00
Lucas De Marchi ee72254ff9 APMrover2: remove undefined function from header 2015-10-30 14:35:20 +09:00
Lucas De Marchi 65e719ccc3 AP_Param: replace find_P() with find() 2015-10-30 14:35:19 +09:00
Lucas De Marchi af88ebf477 GCS_MAVLink: remove send_text_P() in favor of send_text() 2015-10-30 14:35:18 +09:00
Lucas De Marchi 89fc4f4b62 Replace use of send_text_P() with send_text() 2015-10-30 14:35:17 +09:00
Lucas De Marchi 831d8acca5 Remove use of PROGMEM
Now variables don't have to be declared with PROGMEM anymore, so remove
them. This was automated with:

    git grep -l -z PROGMEM | xargs -0 sed -i 's/ PROGMEM / /g'
    git grep -l -z PROGMEM | xargs -0 sed -i 's/PROGMEM//g'

The 2 commands were done so we don't leave behind spurious spaces.

AVR-specific places were not changed.
2015-10-30 14:35:16 +09:00
Lucas De Marchi d595e41003 Replace use of strncmp_P() with strncmp() 2015-10-30 14:35:14 +09:00
Lucas De Marchi 0aa117f65d Replace use of strnlen_P() with strnlen() 2015-10-30 14:35:13 +09:00
Lucas De Marchi 1336d621be Replace use of strcpy_P() with strcpy() 2015-10-30 14:35:12 +09:00
Lucas De Marchi e4b313d2ca Replace use of memcpy_P() with memcpy() 2015-10-30 14:35:11 +09:00
Lucas De Marchi f8f3f5a024 Replace use of strlen_P() with strlen() 2015-10-30 14:35:10 +09:00
Lucas De Marchi aa370fe758 Replace use of strcmp_P() with strcmp() 2015-10-30 14:35:09 +09:00