Mirror/ardupilot
5
0
Fork 0
mirror of https://github.com/ArduPilot/ardupilot synced 2025-01-21 08:08:29 -04:00
Code Issues Packages Projects Releases Wiki Activity
38,068 Commits 71 Branches 511 Tags 761 MiB
40753ab14e
Commit Graph

20145 Commits

Author SHA1 Message Date
Michael du Breuil
40753ab14e AP_Param: Remove non functional AP_Param ignore flags 2019-06-11 10:28:45 +10:00
Michael du Breuil
cc7d13e9ef AP_BattMonitor: Remove param ignore flags 2019-06-11 10:28:45 +10:00
heitiane
931367a7ea AP_HAL: fix RCOutput, RCOutput2 and RCInputToRCOutput examples to prevent the failure of reading and writing channels. 2019-06-11 10:27:44 +10:00
Peter Barker
a025794bae GCS_MAVLink: correct is_streaming check and update of is-streaming mask 2019-06-11 09:26:10 +10:00
Andrew Tridgell
51e187342b HAL_ChibiOS: move the power control changes to be only CubeBlack 
This aims to fix #11455. I have been unable to reproduce the issue,
which leaves me thinking it is either a bootloader difference or a hw
difference between pixhawk1 clones and real pixhawk1 boards
 2019-06-09 16:56:14 +10:00
Andrew Tridgell
df4fc0fff0 AP_NavEKF2: default EK2_MAG_EF_LIM to 50 
this was supposed to be part of the original PR (agreed with Paul to
enable by default)
 2019-06-08 20:24:58 +10:00
Siddharth Purohit
a926effee5 hwdef: iomcu set pin mode to input for autodetecting heater control level 2019-06-08 14:31:01 +10:00
Siddharth Purohit
f23746053d AP_IOMCU_FW: autodetect active high/low on heater control pin 2019-06-08 14:31:01 +10:00
Peter Hall
aa32a0d143 AP_Windvane: fix NMEA vehicle to earth frame 2019-06-08 09:48:03 +09:00
Randy Mackay
607f996232 AC_Avoid: restructure logic of adjust_velocity_circle_fence 2019-06-08 09:35:36 +09:00
Randy Mackay
a96c146758 AR_AttitudeControl: set-throttle-out-stop considered same as running speed controller 
update the speed-last-ms time when set-throttle-out-stop runs or else the desired throttle will not be acceleration limited when the desired speed is next increased above zero
 2019-06-08 09:35:36 +09:00
Randy Mackay
e846840a52 AC_Avoid: fix stopping at circular fence 2019-06-08 09:35:36 +09:00
Peter Barker
e061df0f6d AP_HAL_SITL: attempt to dump stack trace as part of segv handler 2019-06-07 22:03:41 +10:00
Andrew Tridgell
02403d9b93 HAL_SITL: added support for exit on panic() 
used by autotest server
 2019-06-07 20:33:13 +10:00
Peter Barker
35d4555be0 AC_Avoid: improve documentation of AVOID_ENABLE options 2019-06-07 17:37:00 +09:00
Lucas De Marchi
e66de36016 HAL_ChibiOS: fix I2C transaction without stop condition 
Start using i2cSoftStop() instead of i2cStop() so the peripheral
continues to be enabled and with non-gated clock.  This allows time for
the I2C peripheral to continue the ack or stop.
 2019-06-06 09:27:47 -07:00
Andy Piper
31ea3466af AP_InertialSensor: Post-filter logging takes precedence over sensor-rate logging. 2019-06-06 17:09:17 +10:00
Andy Piper
52e4676564 Filter: Allow all filter frequencies to be 16bit. 2019-06-06 17:09:17 +10:00
Andy Piper
36878e9b3c AP_InertialSensor: Allow all filter frequencies to be 16bit. 2019-06-06 17:09:17 +10:00
Andy Piper
fff81a2163 AP_InertialSensor: Make sure the LPF output is used by the notch input. 2019-06-06 17:09:17 +10:00
Andy Piper
1a8475cf9f Filter: Decouple notch filter configuration from the filter itself. 
Allow multiple notch filters to be instantiated using the same configuration.
 2019-06-06 17:09:17 +10:00
Andy Piper
18d403c3ac AP_InertialSensor: Rework notch filter allocation and sampling 
https://github.com/ArduPilot/ardupilot/issues/11346

Allocate a notch filter per-IMU.
Update the notch filters in the backend at the sensor sample rate.
Allow raw logging of post-filtered gyro and accel values.
 2019-06-06 17:09:17 +10:00
Andrew Tridgell
045bdf3478 AP_InternalError: removed unused internal error 2019-06-06 16:35:22 +10:00
Andrew Tridgell
91f80613dd AP_Logger: removed internal error for logging without sem 2019-06-06 16:35:22 +10:00
Peter Barker
dce472745e AP_NavEKF3: take EAS2TAS from AHRS rather than airspeed 2019-06-06 12:44:36 +10:00
Peter Barker
11f31c2851 AP_NavEKF2: take EAS2TAS from AHRS rather than airspeed 2019-06-06 12:44:36 +10:00
Peter Barker
697b8f6b53 AP_AHRS: take EAS2TAS directly from Baro (rather than via airspeed) 2019-06-06 12:44:36 +10:00
Peter Barker
5cfba85095 AP_AirSpeed: take EAS2TAS directory from baro; use for all backends 
Plane was only setting EAS2TAS in the primary frontend; calibration
expected it to be set on each instance.
 2019-06-06 12:44:36 +10:00
Peter Barker
470e88f8b3 AP_Button: use send_to_active_channels() 2019-06-06 12:41:48 +10:00
Peter Barker
264a757095 GCS_MAVLink: add send_to_active_channels method 2019-06-06 12:41:48 +10:00
Peter Barker
4d46c801f2 GCS_MAVLink: panic in SITL if we fail to write to uart 2019-06-06 12:41:48 +10:00
Andrew Tridgell
73bc277470 HAL_ChibiOS: fixed KakuteF7 build 
low on flash
 2019-06-06 12:19:13 +10:00
Andrew Tridgell
2acaada884 HAL_ChibiOS: fixed OMNIBUSF7V2 build 
ran out of flash for plane
 2019-06-06 12:19:13 +10:00
Andrew Tridgell
bfdf857b34 HAL_ChibiOS: fixed airbotf4 build 2019-06-06 12:19:13 +10:00
Peter Barker
f2163fbc24 AC_WPNav: use singleton for getting AC_Avoid instance 2019-06-06 11:47:22 +10:00
Andrew Tridgell
614a059819 HAL_ChibiOS: convert more boards to using new sensor config system 2019-06-05 18:54:40 +10:00
Andrew Tridgell
4a8c307720 AP_UAVCAN: fixed build error of F4 boards with CAN 2019-06-05 18:54:40 +10:00
Peter Barker
4c88a1e9de AP_RangeFinder: remove dangling update_instance declaration 2019-06-04 19:36:57 +09:00
Peter Barker
503aeba7b7 AP_RPM: remove dangling update_instance declaration 2019-06-04 19:36:57 +09:00
Peter Barker
d617904726 AP_Proximity: remove dangling update_instance declaration 2019-06-04 19:36:57 +09:00
Tatsuya Yamaguchi
18a43601cd RangeFinder: Add up to 10 RangeFinder logs 2019-06-04 19:11:11 +10:00
Peter Barker
be9df7f600 AP_Logger: add a README.md to help locating units/mults/fieldtypes 2019-06-04 19:00:11 +10:00
Peter Barker
b644df14d0 AP_Logger: move documentation for fieldtypes, units and mults to top 2019-06-04 19:00:11 +10:00
1iggy2
7323a5da9d AP_Motors: Added Octo I frame 2019-06-04 09:49:44 +09:00
ChristopherOlson
fc84995fb9 AP_Motors:Heli - remove H_LAND_COL_MIN and replace with H_COL_MID 2019-06-04 09:48:03 +09:00
Peter Barker
fb3f761fc7 AP_UAVCAN: fix redefinition of UAVCAN_NODE_POOL_BLOCK_SIZE warning 2019-06-04 10:25:15 +10:00
Peter Barker
cbf6d44277 AP_RCProtocol: fix missing-declaration warning in example 2019-06-04 10:25:15 +10:00
Peter Barker
73c81519da AP_GPS: fix missing-declaration warning in example 2019-06-04 10:25:15 +10:00
Peter Barker
e9160cd9d5 AC_Avoid: correct iteration through edges 2019-06-04 09:06:07 +09:00
Peter Barker
cd6e5b48a1 AC_Avoid: move check for zero-desired-velocity into adjust_velocity_polygon 
This is the method which divides by the length of this vector; the
check belongs in here.
 2019-06-04 09:06:07 +09:00