Andy Piper
dbfcd6c678
AP_HAL_ChibiOS: FoxeerF405v2
2024-04-30 20:29:20 +09:00
Tim Tuxworth
b9cd488cd8
Chibios: CubeRed - change NET_ENABLED to NET_ENABLE
2024-03-22 15:36:19 +09:00
Andrew Tridgell
93a06789b9
HAL_ChibioOS: fixed FDCAN -> CAN labels
...
we use CAN1_RX not FDCAN1_RX in our MCU files
2024-03-22 15:36:19 +09:00
Andrew Tridgell
9a19cf81e3
HAL_ChibiOS: fixed a cache corruption issue on H7
...
This fixes a bug introduced in this PR:
https://github.com/ArduPilot/ardupilot/pull/25900
the bug is that when we don't go via the bouncebuffer on H7 we were
also skipping the cache invalidate/flush ops. This caused data
corruption for filesystem operations, particularly noticible as lua
scripts failing to load with parse errors or log corruption
2024-03-22 15:36:19 +09:00
Minderring
6d7c267955
hwdef: added MicoAir405v2
2024-03-22 15:36:19 +09:00
Andy Piper
355e834acd
AP_HAL_ChibiOS: Orqa F405 Pro
2024-03-22 15:36:19 +09:00
Andy Piper
0426686c92
AP_HAL_ChibiOS: always normalize ESC channel when using iomcu
2024-03-14 09:33:55 +09:00
Andy Piper
a1b9897b37
AP_HAL_ChibiOS: use standard FPV config for SpeedyBeeF405WING
2024-03-14 09:33:55 +09:00
Randy Mackay
2680b1188d
AP_HAL_ChibiOS: CubeRedSecondary IMU orientation fix
...
Also remove duplicate RC_IN serial protocol
2024-03-14 09:33:55 +09:00
Andrew Tridgell
884c3eeb34
AP_HAL_ChibiOS: remove iomcu dshot from Pixhawk1-1M and add to Pixhawk1-bdshot
...
add support for removing ROMFS from hwdef
2024-03-14 09:33:55 +09:00
Andrew Tridgell
dba0497541
hwdef: fixed Pixhawk1-1M build
2024-03-14 09:33:55 +09:00
subashchandar
809a76d419
AP_HAL_ChibiOS: hwdef: Add new hardware pixflamingo f7
2024-03-14 09:33:55 +09:00
Randy Mackay
7df12b4d22
AP_HAL_ChibiOS: AP_Periph does not use AP_VisualOdom
2024-03-14 09:33:55 +09:00
Andy Piper
2a61cc73fe
AP_HAL_ChibiOS: BlitzF745AIO update to ICM-42688
...
enable OSD
use minimal FPV config
enable compass probing
pull uart pins high in bootloader for ELRS
2024-03-14 09:33:55 +09:00
Andrew Tridgell
e36a6226a8
HAL_ChibiOS: fixed CANFD timings (again!)
...
the timing table was not correct, thanks to APD for pointing this out.
This is recalculated from
https://www.kvaser.com/support/calculators/can-fd-bit-timing-calculator ,
with transmitter timing delay compensation added and tested with Salae
captures to ensure we are getting the right bit rates
2024-02-14 09:21:15 +09:00
yjuav
9bf73db55e
hwdef: add YJUAV_A6Ultra board support
2024-02-14 09:21:15 +09:00
David O'Connor
ef10be5918
hwdef: add AnyLeaf H7 board
2024-02-14 09:21:15 +09:00
Andrew Tridgell
6e3369611e
HAL_ChibiOS: enable clock management on G4
...
this allows for a different clock tree in the main fw from the
bootloader
2024-01-25 11:44:52 +11:00
Andrew Tridgell
06a8aef998
HAL_ChibiOS: switched G4 FDCAN clock to 80MHz
...
this requires main CPU clock at 160 MHz instead of 168 MHz
2024-01-25 11:44:44 +11:00
Andrew Tridgell
2d965684f6
HAL_ChibiOS: fixed CANFD timings
...
our CANFD timings were resulting in a lot of busoff errors. Here is an
example of master at 1Mbit/5MBit:
Getting @SYS/can0_stats.txt as -
------- Clock Config -------
CAN_CLK_FREQ: 80MHz
Std Timings: bitrate=1000000 presc=7
sjw=0 bs1=7 bs2=0 sample_point=90.00000%
FD Timings: bitrate=5000000 presc=1
sjw=0 bs1=5 bs2=0 sample_point=90.00000%
------- CAN Interface Stats -------
tx_requests: 2689
tx_rejected: 0
tx_overflow: 443
tx_success: 7
tx_timedout: 2232
tx_abort: 0
rx_received: 18470
rx_overflow: 0
rx_errors: 0
num_busoff_err: 34439
num_events: 18477
ECR: F8
fdf_rx: 18467
fdf_tx_req: 2182
fdf_tx: 0
here is an example with the new timings:
------- Clock Config -------
CAN_CLK_FREQ: 80MHz
Std Timings: bitrate=1000000 presc=8
sjw=1 bs1=8 bs2=1 sample_point=90.00000%
FD Timings: bitrate=8000000 presc=2
sjw=3 bs1=8 bs2=3 sample_point=80.00000%
------- CAN Interface Stats -------
tx_requests: 3023
tx_rejected: 0
tx_overflow: 0
tx_success: 3023
tx_timedout: 0
tx_abort: 0
rx_received: 27865
rx_overflow: 0
rx_errors: 0
num_busoff_err: 0
num_events: 30888
ECR: 0
fdf_rx: 27862
fdf_tx_req: 3016
fdf_tx: 3016
I am testing between a CubeOrange and a Pixhawk6X. I tested 1, 2, 4, 5
and 8 MBit (which are the only valid FD bitrates in our parameters)
Many thanks to Kai from Salient Motion for finding this issue and
providing the corrected timing table
2024-01-25 11:44:32 +11:00
Hayden Donald
a81f2785aa
AP_HAL_ChibiOS: Use correct pin config for ADC2 and ADC3
2024-01-24 08:03:24 +11:00
MallikarjunSE
873e2eac7d
AP_HAL_ChibiOS: update truenav hwdef
2024-01-24 07:58:09 +11:00
Andrew Tridgell
e714f0a7a3
AP_HAL_ChibiOS: fixed name of pitch limit parameters
2024-01-23 15:00:30 +11:00
Andrew Tridgell
a6bceccd82
AP_HAL_ChibiOS: convert param files LIM_ROLL_CD -> ROLL_LIMIT_DEG
2024-01-23 15:00:30 +11:00
Andrew Tridgell
862b0ed8d6
AP_HAL_ChibiOS: convert param files for pitch limits
2024-01-23 15:00:30 +11:00
Andrew Tridgell
e5199a71d6
AP_HAL_ChibiOS: convert ALT_HOLD_RTL to RTL_ALTITUDE
2024-01-23 15:00:30 +11:00
Andrew Tridgell
f935cbaead
AP_HAL_ChibiOS: convert ARSPD_FBW_MIN/MAX to AIRSPEED_MIN and AIRSPEED_MAX
2024-01-23 15:00:30 +11:00
Andrew Tridgell
98d40d0e58
AP_HAL_ChibiOS: converted TRIM_ARSPD_CM to AIRSPEED_CRUISE
2024-01-23 15:00:30 +11:00
Andy Piper
6c634ebc00
AP_HAL_ChibiOS: allow dshot beeps to play on all dshot ESC types
2024-01-23 11:58:55 +11:00
Peter Barker
331110639e
AP_HAL_ChibiOS: rename COMPASS_TYPEMASK to COMPASS_DISBLMSK
...
this is a very confusingly named parameter. I've seen several instances of people treating this as an enable mask rather than a disable mask
2024-01-23 11:54:49 +11:00
Andrew Tridgell
140518da3c
hwdef: added support for Holybro6X-45686
2024-01-23 11:49:14 +11:00
bugobliterator
9de1b6164b
AP_HAL_ChibiOS: add more pins to STM32H757 ADC channel map
2024-01-22 20:35:16 +11:00
bugobliterator
b17d864d1a
AP_HAL_ChibiOS: fix set_pin and _pin_scalar methods for ADC2 and ADC3
2024-01-22 20:35:16 +11:00
MallikarjunSE
f71fc58767
AP_HAL_ChibiOS: Add hwdef for TrueNavPro-G4
2024-01-21 13:10:10 +11:00
MallikarjunSE
6231a5edfd
AP_HAL_ChibiOS: add TrueNavIC hwdef
2024-01-21 13:10:10 +11:00
Andrew Tridgell
f7c7ee00e9
HAL_ChibiOS: added a delete_next thread field for cleanup
...
allows for cleanup of web server threads in bootloader
2024-01-21 12:30:08 +11:00
Andrew Tridgell
5e7b211b79
HAL_ChibiOS: moved M4 disable into H757 script
...
this fixes assert checking in the bootloader and for boards other than
CubeRedPrimary
2024-01-21 12:30:08 +11:00
Andrew Tridgell
b49a7da32a
hwdef: disable use of external flash in PPPGW
...
we cannot upload new firmware on CAN or network with external flash
2024-01-21 12:30:08 +11:00
Andrew Tridgell
855a5d28c0
hwdef: use a common PPPGW include
...
and fixed missing RTC bindings in web server
2024-01-21 12:30:08 +11:00
Andrew Tridgell
3a84f35593
HAL_ChibiOS: support building with no GPIOs
2024-01-21 12:30:08 +11:00
Andrew Tridgell
f225d797d2
hwdef: use common include for network bootloader
2024-01-21 12:30:08 +11:00
Andrew Tridgell
4e49481d3a
hwdef: enable USB for bootloader on Pixhawk6X-PPPGW
2024-01-21 12:30:08 +11:00
Andrew Tridgell
91cc0d7dba
HAL_ChibiOS: ensure periph uses same RAM0 address as bootloader
...
this fixes passing of addresses for boards that use an ALT_RAM_MAP
2024-01-21 12:30:08 +11:00
Andrew Tridgell
82dea9c037
HAL_ChibiOS: ensure our reserved ram is not in available ram regions
...
this prevents a fault when the ram0 region is filled in by the periph
code on boards that do dynamic memory allocation
2024-01-21 12:30:08 +11:00
Andrew Tridgell
a155f592a4
hwdef: added CubePilot PPPGW builds
2024-01-21 12:30:08 +11:00
Andrew Tridgell
2fee9e69db
HAL_ChibiOS: support ROMFS_DIRECTORY in hwdef.dat
2024-01-21 12:30:08 +11:00
Andrew Tridgell
46f65aec4e
AP_Periph: moved web UI script to Tools/AP_Periph
...
for use in multiple boards
2024-01-21 12:30:08 +11:00
Andrew Tridgell
69f23edd4a
hwdef: added bootloader web server for Pixhawk6X-PPPGW
2024-01-21 12:30:08 +11:00
Andrew Tridgell
654b70da67
HAL_ChibiOS: allow HAL_Semaphore in the bootloader
2024-01-21 12:30:08 +11:00
Peter Barker
8e2a634c72
hwdef: don't enable filesystem-romfs just because we have a defaults file
2024-01-18 21:44:15 +11:00