Peter Barker
68b6b77a22
SITL: correct simulation of RichenPower generator
2020-08-05 16:26:19 +09:00
Peter Barker
c8a368d896
AP_Generator: update prearm checks, fill new GENERATOR_STATUS fields
...
AP_Generator_Richenpower: only update servo channel while disarmed
AP_Generator_Richenpower: move warning for servo output channel to prearm checks
AP_Generator: state is simply off if RPM is zero
AP_Generator: send runtime and seconds-until-maintenance in GENERATOR_STATUS
AP_Generator_RichenPower: correct runtime seconds/minutes position in packets
AP_Generator_RichenPower: correct and expand use of mode packet entry
AP_Generator_RichenPower: fail prearm check if generator not seen
AP_Generator_RichenPower: make prearm check for needing maintenance warn-only
AP_Generator_RichenPower: rename runstate to pilot_desired_runstate
AP_Generator_RichenPower: tweak decoding of time-to-maintenance
AP_Generator: add hysteresis for warmup/cooldown in IDLE
AP_Generator: stop generator in case of vehicle crash
AP_Generator: generator must go through idle from run to stop
AP_Generator: emit statustext when generator configured but not present
AP_Generator: do not log if LOG_BITMASK is zero
AP_Generator: do not warn user if generator configured but not present
They won't be able to start the generator if we can't see it.
Don't update the runstate if no readings seen.
AP_Generator: do not send generator status if no readings seen
2020-08-05 16:26:19 +09:00
Andy Piper
d545f392fb
AP_HAL: set base type of FrequencyPeak to uint8_t
2020-08-05 17:20:03 +10:00
Andy Piper
9013432d27
AP_GyroFFT: slew FFT frequency output
2020-08-05 17:20:03 +10:00
Rishabh
bac3660fca
Tools: Push autotune switch test to run after avoidance tests
2020-08-05 15:37:04 +09:00
Rishabh
cf04a01389
Tools: Increase timeout for avoidance autotest
2020-08-05 15:37:04 +09:00
Rishabh
0b112981f9
AC_Avoid: Back away if vehicle breaches margin to obstacle/fence
2020-08-05 15:37:04 +09:00
Rishabh
85692312ac
AC_Fence: Add Pre-Arm check for margin < radius
2020-08-05 15:37:04 +09:00
Rishabh
251ebf9286
AP_Logger: Log Simple Avoidance
2020-08-05 15:37:04 +09:00
Peter Barker
b9dc7118d4
autotest: add do_timesync_roundtrip to do a timesync against SITL
...
On the assumption that ArduPilot processes mavlink packets
synchronously (or at least in order), after we have run a timesync
roundtrip we can reasonably expect any mavlink command we have sent
prior to the roundtrip to have been processed, and we should be able to
see the results in the mavlink stream.
2020-08-05 13:24:15 +10:00
Samuel Tabor
aa776b06a4
Plane: Use sq() rather than powf() in soaring.cpp.
2020-08-05 11:58:54 +10:00
Samuel Tabor
b2d63c5049
Plane: Refactor soaring.cpp.
2020-08-05 11:58:54 +10:00
Peter Barker
d87986ecdd
Copter: move set_throttle_takeoff implementation into Mode
...
No callers except the mode objects, so move it.
2020-08-05 08:23:03 +09:00
Peter Barker
4e12f16608
AP_AHRS: provide accessor for synthetic airspeed
2020-08-04 23:12:03 +10:00
Peter Barker
ac85ec9924
Plane: log AHRS synthetic airspeed
2020-08-04 23:12:03 +10:00
Peter Barker
b5050c1e11
SITL: add simulated MaxSonarI2CXL i2c sensor
2020-08-04 21:40:21 +10:00
Peter Barker
80d7a4ee5e
SITL: simulated i2c support
2020-08-04 21:40:21 +10:00
Peter Barker
2319638dd2
AP_HAL_SITL: simulated i2c support
2020-08-04 21:40:21 +10:00
Peter Barker
0303c5c4a8
SITL: move calculation of simulated rangefinder range to inside SIM_Aircraft
...
this will allow us to use the for non-serial rangefinder backends
2020-08-04 21:40:21 +10:00
Peter Barker
2b69b7ba6a
AP_HAL_SITL: move calculation of simulated rangefinder range to inside SIM_Aircraft
...
this will allow us to use the for non-serial rangefinder backends
2020-08-04 21:40:21 +10:00
Dr.-Ing. Amilcar do Carmo Lucas
5325f789e1
Mavlink: Update to HEAD from master branch and add upstream updates from up-to 20200401
2020-08-04 18:29:59 +09:00
chobits
4b8be2e535
AP_NavEKF3: fix comments
2020-08-04 18:16:18 +10:00
Peter Barker
4640c24872
autotest: correct checking for no-logs string
2020-08-04 15:12:08 +10:00
Peter Barker
b2748f19f6
autotest: correct validator for Distance wait-and-maintain
2020-08-04 15:12:08 +10:00
Willian Galvani
0f992ac6a3
Autotest: add test for Sub position hold
2020-08-03 20:19:28 -07:00
Willian Galvani
385f440d90
Sub: update control_poshold to use AC_PosControlSub
2020-08-03 20:19:28 -07:00
Willian Galvani
7fa8a455d7
Sub: refactor depth control of control_althold to a function
2020-08-03 20:19:28 -07:00
Mark Whitehorn
8325de0845
Copter: default RC_OPTIONS to 0 for tradheli
2020-08-04 10:26:45 +10:00
Mark Whitehorn
0d5de343d2
autotest: default throttle to 1000 for quadplane
...
zero throttle after disarming in do_RTL
Co-authored-by: Peter Barker <pbarker@barker.dropbear.id.au>
2020-08-04 10:26:45 +10:00
Mark Whitehorn
1c60a3eb4c
RC_Channel: default throttle pre-arm check to enabled
2020-08-04 10:26:45 +10:00
Mark Whitehorn
58463e67c5
AP_Arming: default throttle pre-arm check to enabled
2020-08-04 10:26:45 +10:00
Peter Barker
ad435dcdbb
AP_AHRS: remove unused base-class airspeed_estimate method
2020-08-04 10:08:22 +10:00
Andrew Tridgell
676c36bad4
RC_Channel: fixed use of radio_in out of range for angle inputs
...
this prevents mis-calculation of the angle when RC input goes outside
of the configured range. This impacted on throttle nudge in plane when
reverse thrust was enabled
thanks to Pompecukor for reporting!
2020-08-04 09:33:19 +10:00
Andrew Tridgell
6466912ac0
Plane: don't crosstrack after AUTO VTOL takeoff
2020-08-04 09:26:08 +10:00
Andy Piper
e53a43461b
AP_InertialSensor: remove ICM gyro pre-filter
2020-08-04 09:24:16 +10:00
Andy Piper
baf92a17f9
AP_HAL_ChibiOS: disable AP_Mount on "mini" boards
2020-08-04 09:18:14 +10:00
Andy Piper
cd60238e3d
AP_Camera: make solo gimbal inclusion configurable per-board
2020-08-04 09:18:14 +10:00
Andy Piper
07df203d19
Sub: make mount/gimbal inclusion configurable per-board
2020-08-04 09:18:14 +10:00
Andy Piper
6d87d61c7b
Rover: make mount/gimbal inclusion configurable per-board
2020-08-04 09:18:14 +10:00
Andy Piper
b649afe9e5
Plane: make mount/gimbal inclusion configurable per-board
2020-08-04 09:18:14 +10:00
Andy Piper
e91ae19544
GCS_MAVLink: make mount/gimbal configurable on a per-board basis
2020-08-04 09:18:14 +10:00
Andy Piper
54c3d07547
Copter: make make/gimbal configurable on a per-board basis
2020-08-04 09:18:14 +10:00
Andy Piper
f7f5880179
AP_Mount: make mount/gimbal inclusion configurable per-board and disable Solo gimbal on all 1MB boards
2020-08-04 09:18:14 +10:00
Dr.-Ing. Amilcar do Carmo Lucas
5fad6ddddb
Copter: fix typos in PL dataflash logs field description text
2020-08-04 08:14:29 +09:00
Dr.-Ing. Amilcar do Carmo Lucas
be963bbdf9
Copter: fix units and multipliers in PL dataflash logs message
2020-08-04 08:14:29 +09:00
bugobliterator
13188b5e7e
AP_OSD: ensure that we use environment Python interpreter
2020-08-03 14:02:09 +10:00
bugobliterator
a8d36a37c4
AP_Math: ensure that we use environment Python interpreter
2020-08-03 14:02:09 +10:00
bugobliterator
43c16cd417
AP_InertialSensor: ensure that we use environment Python interpreter
2020-08-03 14:02:09 +10:00
bugobliterator
d489100a70
Tools: ensure that we use environment Python interpreter
2020-08-03 14:02:09 +10:00
Andrew Tridgell
2a662793c2
AP_Compass: support probing RM3100 on all 4 addresses
2020-08-02 12:25:29 +10:00