Leonard Hall
349f1aeceb
AC_PosControl: use 2-axis PI controller
2015-03-06 14:02:42 +09:00
Leonard Hall
8d4f0ec80c
AC_PosControl: integrate PID input filter
2015-03-06 14:02:39 +09:00
Randy Mackay
e4d48fdc92
AC_AttControlHeli: separate accel max for roll, pitch
...
renamed _accel_y_max to _accel_yaw_max
2015-03-06 14:02:36 +09:00
Leonard Hall
51455af51a
AC_AttConHeli: integrate PID input filter
2015-03-06 14:02:35 +09:00
Leonard Hall
792b2a2eb3
AC_AttControl: separate accel max for roll, pitch, yaw
...
Also add:
Rate filters
rename rate filter defines
d-term only filter for roll, pitch rate control
accessors to save max accel for roll, pitch, yaw
fix for duplicate ACCEL_Y_MAX param
2015-03-06 14:02:33 +09:00
Leonard Hall
9833c91b2b
AC_AttControl: get_max_rate_step_bf_roll, pitch and yaw
2015-03-06 14:02:30 +09:00
Leonard Hall
f00025e5c9
AC_AttControl: accessor for rate feedforward
2015-03-06 14:02:27 +09:00
Leonard Hall
691fb8947e
AC_AttControl: accessor for rate_bf_targets
2015-03-06 14:02:25 +09:00
Leonard Hall
784a4ce51a
AC_AttControl: increase max angle overshoot to 30deg
2015-03-06 14:02:23 +09:00
Leonard Hall
eb084f7c58
AC_AttControl: bf yaw control uses input filtered PID
2015-03-06 14:02:21 +09:00
Leonard Hall
11a19803e0
Motors: add accessors for motor logging
...
accessor include get_roll, get_pitch, get_yaw, throttle input
2015-03-06 14:01:58 +09:00
Leonard Hall
34a5bc8b33
AC_PI_2D: 2-axis PI controller
2015-03-06 14:01:56 +09:00
Leonard Hall
046949ea8a
AC_HELI_PID: add input filter and restructure
...
Also removed unused initial_ff from construtor
2015-03-06 14:01:54 +09:00
Leonard Hall
517448e536
AC_PID: add input filtering and restructure
2015-03-06 14:01:52 +09:00
Andrew Tridgell
2aae594371
GCS_MAVLink: handle serial loopback in routing
2015-03-04 20:24:11 +11:00
Andrew Tridgell
086f878bdc
HAL_PX4: split IO thread into separate IO and storage threads
...
this prevents a blocked microSD card from blocking IO to the FRAM,
causing parameter changes not to be sticky
2015-03-04 20:18:17 +11:00
Andrew Tridgell
58c92b0158
GCS_MAVLink: added SCALED_IMU3 logging
2015-03-04 19:30:08 +11:00
Andrew Tridgell
79be500e04
GCS_MAVLink: re-generate headers
2015-03-04 19:29:28 +11:00
Andrew Tridgell
eeacbe518b
GCS_MAVLink: update from upstream XML
2015-03-04 19:21:24 +11:00
Randy Mackay
f5f7cd540f
Motors: fix example sketches
2015-03-03 21:39:24 +09:00
Leonard Hall
cf8c211c35
Motors: fix thrust curve and add constraint
2015-03-03 15:49:07 +09:00
Leonard Hall
3e960dfc3b
Motors: add get_voltage_comp_gain
...
This clarifies that lift_max is the inverse of the battery voltage gain
compensation
2015-03-03 15:49:04 +09:00
Leonard Hall
997c6f0868
Motors: move battery resistance calcs to parent
...
Moving from MotorsMatrix to parent Motors class allows these to be used
from other frame types
Also initialise battery resistance
2015-03-03 15:49:02 +09:00
Randy Mackay
09d7cdbc23
Motors: batt_voltage_filt becomes filter object
2015-03-03 15:49:00 +09:00
Randy Mackay
4b78b2ce80
Filter: add get method to LowPassFilter
2015-03-03 15:48:58 +09:00
Leonard Hall
529c6fed3a
Motors: move over current throttle limiting to parent
...
Moving from MotorsMatrix to parent Motors class allows this to be used
from other frame types
2015-03-03 15:48:54 +09:00
Randy Mackay
812473fd9a
MotorsMatrix: use get_hover_throttle_as_pwm
2015-03-03 15:48:52 +09:00
Randy Mackay
1a9d3125ef
Motors: _hover_out to pct * 10 instead of pwm
2015-03-03 15:48:50 +09:00
Leonard Hall
6b7bdf64bd
Motors: move batt voltage lift_max calcs to parent
...
Moving from MotorsMatrix to parent Motors class allows them to be used
by other frame types
Also added sanity check of batt_voltage_min
2015-03-03 15:48:48 +09:00
Randy Mackay
c549b58eb7
MotorsMatrix: remove check of throttle_curve_enabled
2015-03-03 15:48:46 +09:00
Randy Mackay
5fb3de48ee
MotorsTri, Single, Coax: use new thrust curve
2015-03-03 15:48:44 +09:00
Randy Mackay
2eaa4a8445
Motors: remove old throttle curve
2015-03-03 15:48:42 +09:00
Leonard Hall
751dbb7df7
Motors: move thrust curve and volt scaling to parent
...
Moving from MotorsMatrix to Motors allows it to be used from other frames
2015-03-03 15:48:41 +09:00
Randy Mackay
80b498f598
Motors: add loop_rate to test sketch
2015-03-03 15:48:39 +09:00
Randy Mackay
7ab76dbd0e
Motors: add loop_rate to constructor for all frames
2015-03-03 15:48:34 +09:00
Randy Mackay
77d4b3a2ae
Motors: add loop_rate to constructor
2015-03-03 15:48:32 +09:00
Leonard Hall
ec9d7dd99e
Motors: minor comment fixes
2015-03-03 15:48:30 +09:00
Leonard Hall
1d0ee68116
Motors: over current throttle limiting
2015-03-03 15:48:28 +09:00
Randy Mackay
1217ab9579
BattMon: add get_type method
2015-03-03 15:48:24 +09:00
Randy Mackay
f6523c0997
Motors: Add THR_LOW_CMP to adjust low throttle inputs affect on attitude control
2015-03-03 15:48:21 +09:00
Leonard Hall
83e3e2fec2
Motors: thrust curve and voltage scaling for matrix supported frames
2015-03-03 15:48:19 +09:00
Leonard Hall
5b0bd49ff2
Motors: configurable yaw headroom for matrix frames
2015-03-03 15:48:15 +09:00
Randy Mackay
51213235b4
OreoLED_PX4: available only on PX4
2015-03-02 16:58:17 +09:00
Randy Mackay
f1ce70e748
Notify: disable oreoled by default
2015-03-02 16:58:14 +09:00
Randy Mackay
89cd74c35f
Notify: OreoLED supports handle_led_control
...
includes support for send bytes ioctl
2015-03-02 16:58:12 +09:00
Randy Mackay
90cac02bd7
Notify: OreoLED fix to fade-in when armed
2015-03-02 16:58:10 +09:00
Randy Mackay
35a3a52f29
Notify: add support for handle_led_control
2015-03-02 16:58:06 +09:00
Randy Mackay
9159c7107d
GCS_MAVLink: version update after LED_CONTROL added
2015-03-02 16:58:03 +09:00
Randy Mackay
26d54398e2
GCS_MAVlink: generate after LED_CONTROL added
2015-03-02 16:58:01 +09:00
Randy Mackay
3fdabb3667
GCS_MAVlink: define LED_CONTROL in ardupilotmega.xml
2015-03-02 16:57:59 +09:00
