Commit Graph

77 Commits

Author SHA1 Message Date
Peter Barker 0a0e11ba21 Sub: correct compilation when features disabled
Gripper
Mount
2018-05-10 17:55:13 +09:00
Randy Mackay defdeaed95 Sub: integrate AC_Loiter 2018-04-04 10:45:10 +09:00
Michael du Breuil 6ebe954d51 Sub: Support new battery failsafes 2018-03-27 22:12:21 +01:00
Dr.-Ing. Amilcar Do Carmo Lucas f63388cb07 Sub: Obey RANGEFINDER_ENABLED and AC_TERRAIN build macros 2018-03-15 15:03:22 +00:00
Randy Mackay 6a701b2412 Sub: move pos-control pids to pos-control library 2018-01-23 12:00:43 +09:00
Randy Mackay cef50d8a30 Sub: velocity pi moved to position control library 2018-01-23 12:00:43 +09:00
ChrisBird 0fb679b2b2 Sub: Separate max ascent and descent speeds
This is to match a change made to Copter.

It might be relevant to sub in that users may wish to have asymmetrical descent and ascent rates.

New parameters named:
PILOT_SPEED_UP (technically renamed PILOT_VELZ_MAX)
PILOT_SPEED_DN

Removed parameter PILOT_VELZ_MAX (technically renamed to PILOT_SPEED_UP).

Modes impacted:
ALT_HOLD
CIRCLE
POSHOLD

Update a section in GUIDED mode but I don't think it is ever used but update just in case.

It will use the PILOT_SPEED_UP for ascending max velocity.  For down it will check if
it is 0, if so then it will PILOT_SPEED_UP instead, if non zero it will use PILOT_SPEED_DN.
This retains current behavior and gives the flexibility to change it if desired.

The above behavior is less of a concern for Sub but to keep it consistent its been implemented it the same way.
2017-12-28 15:16:08 -05:00
Jacob Walser 1998cf93d2 Sub: JS_LIGHTS_STEP -> JS_LIGHTS_STEPS 2017-10-26 15:45:57 -04:00
Jacob Walser 15658f1526 Sub: rework camera tilt input and slew limiting 2017-10-26 10:44:23 -04:00
Eugene Shamaev 7314b515c0 ArduSub: move of CAN parameters into separate group 2017-07-03 11:44:32 +01:00
Jacob Walser 785f774887 Sub: Rework pilot input failsafe, add enable and timeout params 2017-04-16 14:25:13 -04:00
Jacob Walser d629d4ba9e Sub: Change mode button function implementation 2017-04-05 13:29:06 -04:00
Jacob Walser 69c9dbc286 Sub: Remove deprecated/unused CLI and AP_Menu 2017-04-05 13:29:06 -04:00
Jacob Walser 0e180f88ad Sub: Remove unused parameter enum values 2017-04-05 13:29:06 -04:00
Jacob Walser fab139ecce Sub: Remove unused WP_NAVALT_MIN parameter 2017-04-05 13:29:06 -04:00
Jacob Walser 1a68fce2d0 Sub: Remove auto_disarm_check
There isn't a good set of conditions to determine if we should
automatically disarm
2017-03-24 16:31:09 -04:00
Jacob Walser 0b080c78d8 Sub: Remove unused gps_hdop_good parameter 2017-03-23 14:16:41 -04:00
Jacob Walser 3934281b43 Sub: Remove esc calibration 2017-03-23 11:59:30 -04:00
Jacob Walser 15a117dfb4 Sub: Remove ch6 tuning 2017-03-23 01:36:17 -04:00
Jacob Walser fae6c084ac Sub: Add camera slew rate parameter 2017-03-22 15:53:38 -04:00
Jacob Walser 7c552d3545 Sub: Remove unsused aux switch code 2017-03-10 15:46:30 +11:00
Jacob Walser ca38a344f8 Sub: Remove unsupported autotune 2017-03-07 09:35:41 +11:00
Jacob Walser d21cd513cd Sub: Add AP_Arming_Sub class 2017-03-01 10:57:27 -05:00
Jacob Walser 840521ac8c Sub: Remove transect mode
This experimental mode is no longer relevant
2017-02-21 11:26:14 +11:00
Jacob Walser 4112fd1316 Sub: Remove mode header 2017-02-21 11:26:14 +11:00
Jacob Walser 5233b25910 Sub: Format all C++ with Tools/CodeStyle/astylerc 2017-02-21 11:26:14 +11:00
Jacob Walser 029cf3b388 Sub: Update to library changes 2017-02-21 11:26:14 +11:00
Jacob Walser 6b3610ea70 Sub: Set frame configuration with parameter instead of make target
Now only one firmware is required for ArduSub
2017-02-21 11:26:14 +11:00
Jacob Walser 10ff379938 Sub: Change software type to 40 to identify as Sub instead of copter 2017-02-21 11:26:14 +11:00
Jacob Walser 9ec79ab654 Sub: Remove RC radio failsafe 2017-02-21 11:26:14 +11:00
Jacob Walser 23122f4b90 Sub: Add camera tilt servo center parameter 2017-02-21 11:26:14 +11:00
Jacob Walser 5bd2af6b77 Sub: Add throttle channel gain scalar parameter 2017-02-21 11:26:14 +11:00
Jacob Walser 45de3b1163 Sub: Disable Avoidance and Proximity by default 2017-02-21 11:26:14 +11:00
Jacob Walser d11b07bd4f Sub: Remove PILOT_THR_BEHAVIOR parameter and disable auto_disarm_check() 2017-02-21 11:26:14 +11:00
Jacob Walser d83898db8c Sub: Change EEPROM format version to 1
This will cause eeprom to be wiped, and defaults loaded when flashing
firmware from earlier versions.
2017-02-21 11:26:14 +11:00
Jacob Walser 538e3f9c8f Sub: Reorganize parameters
Parameter enum indices reordered
Also removed unused input_manager
2017-02-21 11:26:14 +11:00
Jacob Walser 0d575681de Sub: Remove RTL 2017-02-21 11:26:14 +11:00
Jacob Walser 3010114adb Sub: Disable CH6 Tuning 2017-02-21 11:26:14 +11:00
Jacob Walser 69d89c5871 Sub: Remove LAND parameters 2017-02-21 11:26:14 +11:00
Jacob Walser 19afd7a3dd Sub: Remove simple mode parameters, and disable simple modes 2017-02-21 11:26:14 +11:00
Jacob Walser 9aa05e1195 Sub: Remove (unused) PHLD parameters 2017-02-21 11:26:14 +11:00
Jacob Walser f10f1a0bae Sub: Remove throw mode 2017-02-21 11:26:14 +11:00
Jacob Walser cfaf08ad31 Sub: Remove frame_orientation parameter 2017-02-21 11:26:14 +11:00
Jacob Walser eeadfa0d92 Sub: Disable TRANSECT parameters 2017-02-21 11:26:14 +11:00
Jacob Walser 57013583ac Sub: Remove TELEM_DELAY parameter 2017-02-21 11:26:14 +11:00
Jacob Walser 4cb9ee947b Sub: Disable autotune parameters 2017-02-21 11:26:14 +11:00
Jacob Walser 9c5b304626 Sub: Remove RSSI 2017-02-21 11:26:14 +11:00
Jacob Walser 7e1c63aba3 Sub: Remove sprayer 2017-02-21 11:26:14 +11:00
Jacob Walser 9503e8d140 Sub: Remove ADSB 2017-02-21 11:26:14 +11:00
Jacob Walser 8aebeac6d7 Sub: Remove precision landing 2017-02-21 11:26:14 +11:00