Peter Barker
0cf747cdbe
SITL: remove RCMAP_ parameters from SilentWings parameters
...
These files contain a lot of values which happen to be the defaults.
These are some of them.
2020-02-10 13:55:05 +11:00
Rishabh
dc662a56b2
SITL: Added DJI Hexa and Octa for SITL
2020-01-29 16:57:23 +09:00
Andrew Tridgell
fb3496b63b
SITL: added SIM_GPS2_POS
...
and re-arrange two sets of GPS parameters to be arrays
2020-01-26 16:55:17 +11:00
Rajat Singhal
6bbf6f380f
SITL: Add rover support for Airsim
2020-01-23 15:12:50 +11:00
Andrew Tridgell
dc80df23e9
SITL: added betaflight-rev-x frame
2020-01-16 19:13:13 +11:00
Andrew Tridgell
6218537ff7
SITL: fixed segv in SITL RCProtocolTest
2020-01-09 17:38:52 +11:00
Peter Barker
2f60f783d4
SITL: add simulated Frsky devices
2020-01-08 23:53:48 +11:00
Rajat Singhal
552191925b
SITL: Add OA BendyRuler params for Airsim Lidar, rename file
2020-01-08 09:10:54 +09:00
Peter Barker
4cc7df8e15
SITL: emit hit-ground via mavlink
...
This lets autotest look for it
2020-01-01 22:10:43 +11:00
Andy Piper
a6a020b3c7
SITL: record throttle value instead of motors on/off
2019-12-31 10:34:02 +11:00
Andrew Tridgell
9b4764eb1f
SITL: fixed airsim example scripts
2019-12-17 15:40:00 +11:00
Andrew Tridgell
061d778bfd
SITL: improved AirSim quadX tuning
...
and move params to normal location, so they are found with
sim_vehicle.py
2019-12-17 15:40:00 +11:00
Andrew Tridgell
d657fed34a
SITL: fixed accuracy of lat/lon in AirSim
2019-12-17 15:40:00 +11:00
Mark Whitehorn
76b985fc9c
SITL: only recalculate ahrs rotation matrix if necessary
2019-12-17 11:42:40 +11:00
Mark Whitehorn
ab33679124
SITL: include ahrs_orientation in airspeed calculation
2019-12-17 11:42:40 +11:00
Andy Piper
c807267bab
SITL: add rpm-based motor noise per-motor to gyros and accels
...
convert multicopter thrust to rpm per motor
2019-12-17 10:07:06 +11:00
Rajat Singhal
d34ccec084
SITL: Fix sensor data calculation in Airsim
2019-12-17 08:11:27 +11:00
Peter Barker
deadafd7c7
SITL: use https:// scheme for ardupilot URLs
2019-12-10 07:53:46 +11:00
Ebin
3daebe974e
SITL: Fix for unrealistic speed and acceleration in Balance Bot
2019-12-09 09:00:31 +11:00
Rajat Singhal
a1e1558709
SITL: Test launch file for ROS multi-vehicle sim
2019-12-05 08:06:42 +08:00
Rajat Singhal
241d406ef3
SITL: Example script for ROS multi-vehicle with Airsim
2019-12-05 08:06:42 +08:00
Rajat Singhal
6a075b2556
SITL: Fixes, improvements to Airsim multi-vehicle script
...
1. Kill all running Copter binaries while exiting
2. Set default GCS IP address
3. Fix mcast ip address for different platforms
4. Set variable for number of vehicles
2019-12-05 08:06:20 +08:00
Willian Galvani
06e71b061a
SITL: Sub: add square curve model to thruster
2019-12-03 10:55:08 -05:00
Andrew Tridgell
7b203f6816
SITL: added SIM_MAG_SCALING for testing scale factor errors
2019-12-03 20:48:23 +11:00
Peter Barker
d332118b05
SITL: increase Wasp reading frequency
...
The driver requires a reading each time it is called (20Hz)
2019-12-02 19:07:03 +11:00
Michael du Breuil
feead0a42c
SITL: ADSB: Don't hard code the emitter type
2019-11-26 11:57:29 +11:00
Peter Barker
326ba5b974
SITL: support for virtual hardware safety switch
2019-11-26 10:14:11 +11:00
Andrew Tridgell
4d50996780
SITL: added MegaSquirt EFI simulation
2019-11-17 20:10:54 +11:00
Patrick José Pereira
e52fc375c4
Sub: Add fake sea floor and update range
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2019-11-12 10:02:29 -08:00
Willian Galvani
168a182310
SITL: Sub: add angular drag based on a laminar, external flow
2019-11-11 07:39:57 -08:00
Willian Galvani
393b018f31
SITL: Sub: Fix rotational physics logic
2019-11-11 07:39:57 -08:00
Willian Galvani
fbbfbe0103
SITL: Sub: Use proper phyisics for thrusters
2019-11-11 07:39:57 -08:00
Willian Galvani
9c2ffed876
SITL: Submarine: add torque for static stability
...
Subs are statically stable regarding pitch and roll.
This patch reproduces this in SITL
2019-11-11 07:39:57 -08:00
Willian Galvani
394aff6535
SITL: add deadzones to Sub thrusters PWM signals
2019-11-11 07:39:57 -08:00
Willian Galvani
1e2340fbb4
SITL: Fix buoyancy direction for earth-frame
...
Previously the sub would just go upwards, so rolling it 180º caused it to sink
2019-11-11 07:39:57 -08:00
Willian Galvani
e190d99bc6
SITL: Add 6dof frame for Sub
2019-11-11 07:39:57 -08:00
Willian Galvani
cc45aeb526
SITL: get rid of frame_vectored.h for Sub
2019-11-11 07:39:57 -08:00
Peter Barker
c1acdc4994
SITL: increase simulated rangefinder frequency to 5Hz
2019-11-09 08:01:53 +11:00
Peter Barker
7b046c8b75
SITL: improve testing instructions for simulated rangefinders
2019-11-09 08:01:53 +11:00
Peter Barker
df0233a7d1
SITL: add support for simulated serial rangefinders
...
SITL: add base class for serial rangefinder simulators
SITL: add Benewake rangefinder simulator
SITL: add support for simulated LightWareSerial rangefinder
SITL: add support for simulated Lanbao rangefinder
SITL: add support for simulated BLping rangefinder
SITL: add support for simulated LeddarOne rangefinder
SITL: add support for simulated uLanding rangefinders
SITL: add support for simulated MaxsonarSerialLV rangefinders
SITL: add support for simulated Wasp rangefinders
SITL: add support for simulated NMEA rangefinders
2019-11-08 20:12:28 +11:00
Peter Barker
990273a778
SITL: add accessor for rangefinder range
2019-11-08 20:12:28 +11:00
Peter Barker
270831d70d
SITL: add bidirectional communication for simulated serial devices
2019-11-08 20:12:28 +11:00
Peter Hall
3d8a5de1f0
SITL: ADSB: pass home location not string
2019-11-05 11:46:59 +11:00
Peter Barker
acd03c6636
SIM_AirSim: correct format string issue
2019-11-05 11:29:08 +11:00
Andrew Tridgell
ae289052e9
SITL: added LED state
2019-11-04 13:01:59 +11:00
Peter Barker
a08443ff19
SITL: break out a SIM_SerialDevice base class, use it for SIM_Vicon
2019-10-29 18:41:13 +11:00
Patrick José Pereira
e18883fddf
SITL: Add missing shove forces in SIM_Submarine
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2019-10-29 09:44:24 +11:00
Tom Pittenger
bbd6f3aa6c
SITL: morse simulator should generate packets from same vehicle sysid
2019-10-21 14:29:30 +09:00
Peter Barker
47fbf70e85
SITL: create SITL tonealarm files to hold enable parameter
2019-10-16 16:00:35 +11:00
Peter Barker
32ec6d7e9a
SITL: add a simulated buzzer
2019-10-16 16:00:35 +11:00