Commit Graph

1011 Commits

Author SHA1 Message Date
Andy Piper 3db6203fb6 AP_InertialSensor: reduce FIFO buffer size to avoid DMA contention 2020-12-23 18:03:12 +11:00
Peter Barker 72acc8bfc8 AP_InertialSensor: use primary gyro (not accel) for get_delta_angle_dt 2020-11-29 13:21:53 +11:00
Peter Barker 2437cf8a24 AP_Logger: use instance number for IMU logging 2020-11-11 19:31:53 +11:00
Andrew Tridgell f6c45c3bcd AP_InertialSensor: cope with INS_MAX_INSTANCES < 3 2020-11-10 16:15:45 +11:00
Andrew Tridgell e8f21d3458 AP_InertialSensor: fixed rpm indexing for vtol motors
quadplane vtol motors start at 1
2020-10-28 14:20:44 +11:00
Michael du Breuil c86dcf91d6 AP_InertialSensor: Run vibration monitoring on all instances 2020-10-24 09:54:04 +11:00
Peter Barker 02c9aa2ae2 AP_InertialSensor: remove unused define 2020-10-20 11:24:34 +11:00
mhefny 02daa4c3ec AP_InertialSensor: update L3G4200D driver 2020-10-06 09:27:26 -07:00
Andrew Tridgell cfc59497f6 AP_InertialSensor: trigger internal error on persistent IMU reset
this will give users a warning when they are getting the Invensense
IMU FIFO reset issue
2020-09-02 06:42:44 +10:00
Andrew Tridgell d5c0522651 AP_InertialSensor: instantiate SIM_IMU_COUNT sensors in SITL 2020-08-28 10:17:00 +10:00
bugobliterator 4cdb4b74f3 AP_InertialSensor: add support for checked register in Invensensev2 Drvr 2020-08-06 12:41:35 +10:00
Andy Piper e53a43461b AP_InertialSensor: remove ICM gyro pre-filter 2020-08-04 09:24:16 +10:00
bugobliterator 43c16cd417 AP_InertialSensor: ensure that we use environment Python interpreter 2020-08-03 14:02:09 +10:00
Andy Piper d4ba821297 AP_InertialSensor: make the backend fast gyro rate configurable and independent from the accel rate
allow fast sampling of gyros on MPU6000 and MPU6500
2020-07-28 20:47:16 +10:00
Andy Piper 05366e9aa9 AP_InertialSensor: delegate active harmonic calculation to the filter 2020-07-14 09:50:06 +10:00
Andy Piper faf9bbbf3a AP_InertialSensor: make the backend fast gyro rate configurable
raise gyro rate default on F7 and H7
clean up gyro rate docs and output startup banner
2020-07-10 16:45:29 +10:00
Andy Piper 61bb42cc0c AP_InertialSensor: allow up to four distinct notch center frequencies to be updated
apply the LPF after the notch filters to reduced notch-induced noise
2020-06-21 19:09:35 +10:00
duccan cdcdd5ce27 AP_HAL_ChibiOS: Added support for Bitcraze Crazyflie 2.1
Rework after review:
- Kept old IMU and barometer definition of crazyflie 2.0 in hwdef
- Added comment regarding soft-reset command
- Added defaults.parm for crazyflie
2020-06-07 07:49:37 +10:00
duccan 0d96c7f7a5 AP_HAL_ChibiOS: Added support for Bitcraze Crazyflie 2.1 2020-06-07 07:49:37 +10:00
Andrew Tridgell cab3630009 AP_InertialSensor: switched to supplying timestamps for SITL
this allows the time step to change on each loop as we no longer use
the average sensor rate when calculating deltas
2020-06-03 18:11:06 +10:00
Andy Piper 8ac79da643 AP_InertialSensor: FFT gyro window would overflow on windows >= 256
convert FFT buffers to ObjectBuffer<float> for lock-free access
push gyro samples directly into the FFT ring buffer from the gyro thread
2020-05-24 07:43:34 +10:00
Andy Piper d0a241597a AP_InertialSensor: add support for double harmonic notches to more effectively target wider noise peaks 2020-04-28 09:32:02 +10:00
Andrew Tridgell 5c6749ee54 AP_InertialSensor: use wait_pin() to wait for DRDY pin if available 2020-04-23 07:28:13 +10:00
Peter Barker efbf929bc0 AP_InertialSensor: rename APMrover2 to Rover 2020-04-14 09:50:34 +09:00
Andrew Tridgell d772289b0d AP_InertialSensor: added driver for ADIS16470 2020-04-13 11:57:04 +10:00
Andrew Tridgell d8b33bcac9 AP_InertialSensor: suppress expected errors from invensense IMUs 2020-03-11 16:30:06 +11:00
Andy Piper 507bd9eea9 AP_InertialSensor: add in user-specified background noise when there is no rpm noise 2020-02-25 08:35:09 +11:00
Andy Piper 41b41c05f3 AP_InertialSensor: scale SITL motor noise by SIM_VIB_MOT_MULT 2020-02-22 11:15:37 +11:00
Andy Piper 0e9b2a26c5 AP_InertialSensor: SITL the raw sample rate is not the same as the sensor rate
use regulated time for frequency noise to avoid spurious harmonics
SITL sensors must be true separate instances
don't compile in FFT structures if DSP disabled
2020-02-22 11:15:37 +11:00
Andy Piper 3d9776dd6d AP_InertialSensor: expose statically filtered gyro values for FFT analysis and allow sampling to gyro window for FFT analysis.
FFT windows can be dynamically allocated
add harmonic notch dynamic tracking mode
unwind gyro window allocation in the case of failure
allow access to harmonic notch harmonics
2020-02-22 11:15:37 +11:00
Peter Barker ab7ee46423 AP_InertialSensor: mark some parameters as Calibration parameters 2020-02-04 20:29:09 +11:00
Randy Mackay b7f6f4a05e AP_InertialSensor: reduce POS param range to 5m and add increment 2020-02-01 08:46:03 +09:00
Andrew Tridgell 58708c483f AP_InertialSensor: make all semaphores recursive
the cost is very similar and this prevents an easy coding error which
can occur on less used code paths
2020-01-19 20:19:30 +11:00
Andrew Tridgell b89c241329 AP_InertialSensor: use take_blocking instead of HAL_SEMAPHORE_BLOCK_FOREVER
this makes for cleaner and smaller code as the failure case is not
needed
2020-01-19 20:19:30 +11:00
Andy Piper 52f59fb573 AP_InertialSensor: more accurately compute INS noise taking throttle into account and adding frequency noise noisily
make SITL fast-sampling correct
2019-12-31 10:34:02 +11:00
Andrew Tridgell e52a3b9978 AP_InertialSensor: default fast sampling on
if we have a first IMU capable of fast sampling then we want it
enabled by default
2019-12-23 09:55:07 +11:00
Andy Piper 143a071788 AP_InertialSensor: add rpm-based motor noise to gyros and accels
Remove sample time error in backend.
2019-12-17 10:07:06 +11:00
Andy Piper 7e35622015 AP_InertialSensor: correct loop rate on BMI055, clean up setting of loop rate on BMI055 and BMI088 2019-12-09 13:29:34 +11:00
Andy Piper 763089addb AP_InertialSensor: slight improvement to LOG_BAT_OPT docs. 2019-12-01 12:19:46 +11:00
Andrew Tridgell 9dc618ddd4 AP_InertialSensor: added gyro_harmonic_notch_enabled() 2019-11-19 07:08:01 +08:00
Andrew Tridgell 77d21f9f5d AP_InertialSensor: return HarmonicNotchDynamicMode 2019-11-19 07:08:01 +08:00
Andrew Tridgell eb582ac0cc AP_InertialSensor: avoid SITL build on non-SITL 2019-11-17 20:10:54 +11:00
Mark Whitehorn 00948c33d5 AP_InertialSensor: rename sensor_config_error to config_error 2019-11-08 10:14:34 +11:00
Andrew Tridgell 236ce28339 AP_InertialSensor: updated for heater changes 2019-11-02 16:31:04 +11:00
Andy Piper 6381183aa3 AP_InertialSensor: expose harmonic notch tracking mode 2019-10-31 11:18:40 +08:00
Andrew Tridgell d6e17b0c2b AP_InertialSensor: publish an IMU temperature
makes testing of mavlink extension easier
2019-10-10 13:23:03 +11:00
Andrew Tridgell 850892c3d9 HAL_ChibiOS: fixes from LGTM errors 2019-09-22 18:35:15 +10:00
Andy Piper 8e385d7453 AP_InertialSensor: correct formatting 2019-09-11 18:41:05 +10:00
Andy Piper 5b7f9f6bea AP_InertialSensor: while sensors are converging update the filters sample rates. if gyro filtering produces invalid output, keep the previous value 2019-09-11 18:41:05 +10:00
Andy Piper a9a7fe3ea5 AP_InertialSensor: ensure harmonic notch gets appropriate defaults 2019-09-11 18:41:05 +10:00