Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
33,347 Commits 71 Branches 509 Tags 718 MiB
Commit Graph

33347 Commits

Author SHA1 Message Date
Kevin Lopez Alvarez 3a06e866a7 HAL_ChibiOS: add DrotekP3Pro hardware definitions 2019-01-11 12:02:59 +11:00
Andrew Tridgell 992f36f4a4 Copter: implement get_wp() for follow 
this allows the GCS to plot the position target
 2019-01-11 09:53:42 +09:00
Andrew Tridgell 4e61bc821b waf: fixed static link build 
for bebop
 2019-01-11 09:52:11 +09:00
Andrew Tridgell 9ed3e9eec5 HAL_ChibiOS: fixed build of sdcard 2019-01-11 09:48:16 +09:00
Andrew Tridgell a03b569d43 DataFlash: allow startup with no microSD 
this allows logging to work with insert after boot
 2019-01-11 09:48:16 +09:00
Andrew Tridgell 02987b7614 HAL_ChibiOS: try to mount microSD after boot 2019-01-11 09:48:16 +09:00
Andrew Tridgell 638b3b80d2 HAL_ChibiOS: log stdout to USB on mindpx-v2 2019-01-11 09:48:16 +09:00
Andrew Tridgell ff67c83bc1 HAL_ChibiOS: allow mount of microSD after boot 
when disarmed, try to mount sd card every 3s
 2019-01-11 09:48:16 +09:00
Andrew Tridgell da21947fe9 HAL_ChibiOS: fixed card inserted test for SDC 2019-01-11 09:48:16 +09:00
Andrew Tridgell 467286b0b9 ChibiOS: added sd slowdown support 2019-01-11 09:48:16 +09:00
Andrew Tridgell bccddf3701 AP_BoardConfig: added BRD_SD_SLOWDOWN parameter 
allows for reduction in microSD clock speed
 2019-01-11 09:48:16 +09:00
Andrew Tridgell 6fb84cfa6b HAL_ChibiOS: support microSD slowdown 
allow use of BRD_SD_SLOWDOWN to slow down clock on microSD
 2019-01-11 09:48:16 +09:00
Andrew Tridgell e1889fbf66 AP_HAL: added set_slowdown() to SPIDevice 
used to slow down a SPI device below normal high speed operation
 2019-01-11 09:48:16 +09:00
Andrew Tridgell 058980a94d AP_HAL: added fs_init() to Util API 2019-01-11 09:48:16 +09:00
Randy Mackay 45d912bdd6 Copter: do not use out-of-range mode switch values 2019-01-11 09:40:39 +09:00
Randy Mackay d11caf042d Copter: do not use out-of-range aux switch values 
This protects against FrSky SBUS that can send 874 for some channels even after recovering from a failsafe
 2019-01-11 09:40:39 +09:00
Andrew Tridgell 32d0137c08 AP_RCProtocol: bring up to date with master 
this adds new RC protocol decoders for SRXL, SUMD and ST24 as well as
updating to latest soft-serial decoder
 2019-01-11 09:31:27 +09:00
Siddharth Purohit 043c303146 HAL_ChibiOS: add CubePurple/PH2Slim board config 2019-01-11 09:16:16 +09:00
Andrew Tridgell 0ee8a8d93c HAL_ChibiOS: switched fmuv5 firmware to ChibiOS IO fw 
so users installing fmuv5 on a Pixhawk4 get the SBUS fixes
 2018-12-31 08:10:19 +11:00
Andrew Tridgell f303e5b659 HAL_ChibiOS: fixed safety switch and LEDs on PH4-mini 
fixes #10127
 2018-12-31 08:06:43 +11:00
Randy Mackay 6c4da9e38f Copter: version to 3.6.4 2018-12-27 12:12:07 +09:00
Randy Mackay 570f37c5fe Copter: 3.6.4 release notes 2018-12-27 12:06:44 +09:00
Randy Mackay 58f5da7bc7 Copter: version to 3.6.4-rc1 2018-12-20 14:43:57 +09:00
Randy Mackay 6011515d8b Copter: 3.6.4-rc1 release notes 2018-12-20 14:43:13 +09:00
Randy Mackay 6a0b56ee77 AP_Mount: fix extreme gimbal movements before TX is turned on 2018-12-20 09:02:02 +09:00
bnsgeyer 9ac8e98161 AP_Motors: Dualheli- fix bug for scaling second swashplate 2018-12-18 09:15:28 +09:00
Andrew Tridgell 2c75272019 HAL_ChibiOS: setup PH4 for right voltage scaling 2018-12-18 11:02:18 +11:00
Randy Mackay a9982be6fc AP_OpticalFlow: remove unnecessary init from CSOF and add comments 
also replace greater-than-zero with is_positive
 2018-12-17 09:08:27 +09:00
Randy Mackay c3407ab598 AP_OpticalFlow: driver for Cheerson CX-OF 2018-12-17 09:07:07 +09:00
Randy Mackay 4efd434357 AP_SerialManager: add optical flow to list of protocols 2018-12-17 09:05:35 +09:00
Randy Mackay 123128deac GCS_Common: optical flow comp fields should include flow 2018-12-17 09:05:27 +09:00
Andrew Tridgell 1b19d09653 AP_InertialSensor: fixed orientation of 2nd OmnibusF7V2 IMU 2018-12-17 09:01:07 +09:00
Randy Mackay c8cbbb9246 Copter: follow return wp_distance and wp_bearing 2018-12-17 08:59:28 +09:00
Randy Mackay 528ed38ecf Copter: remove follow mode debug 2018-12-17 08:59:25 +09:00
Randy Mackay 5d8b2002f1 AP_Follow: add get bearing and distance accessors 
used for reporting purposes
 2018-12-17 08:59:22 +09:00
Randy Mackay 0107600c69 AP_Follow: move enabled accessor to top of definition file 2018-12-17 08:59:18 +09:00
Randy Mackay 2aeac20772 AP_Follow: remove send-text to GCS 2018-12-17 08:59:13 +09:00
Andrew Tridgell 02d05d2e76 AP_Follow: fixed handling of FOLL_SYSID parameter 
removed separate variable and use parameter only
 2018-12-17 08:56:15 +09:00
Andrew Tridgell 258f472028 HAL_ChibiOS: detect stuck I2C bus and clear with SCL 
This detects the I2C bus becoming stuck with SDA low after a timeout
and clears the bus by toggling SCL. Many thanks to @jhw84 for the
suggestion
 2018-12-14 15:49:11 +11:00
Andrew Tridgell 3ffee081a4 HAL_ChibiOS: added palReadLineMode() function 
used to change and restore line modes
 2018-12-14 15:49:08 +11:00
Randy Mackay 63eb66fe08 Copter: version to 3.6.3 2018-12-04 09:53:28 +09:00
Randy Mackay 23a236f89a Copter: 3.6.3 release notes 2018-12-04 09:52:57 +09:00
Randy Mackay 28b0fc51c3 Copter: version to 3.6.3-rc1 2018-12-01 13:50:58 +09:00
Randy Mackay 9d07580ae5 Copter: 3.6.3-rc1 release notes 2018-12-01 13:50:29 +09:00
ChristopherOlson b242ec680e Copter:Parameters-TradHeli - set defaults for PSC and LOIT controllers 2018-12-01 13:44:26 +09:00
Andrew Tridgell 22ed074030 AP_OSD: fixed fonts for new font system 2018-11-29 15:35:50 +11:00
Andrew Tridgell 5e162cb0e1 HAL_ChibiOS: use ChibiOS IO firmware for Pixhawk4 2018-11-28 09:12:19 +11:00
Andrew Tridgell 792ac1a4b8 Tools: added ChibiOS IO firmware for Pixhawk4 2018-11-28 09:12:04 +11:00
Andrew Tridgell 352a7667a7 HAL_ChibiOS: allow ROMFS to override a file 
this allows a hwdef.dat with an include to change an embedded file
specified in the include
 2018-11-28 09:10:10 +11:00
Matt d3edb53fcd AP_BattMonitor: Increase solo's power off button delay time 
The Solo battery's power button needs to be held to power off. The
debounce time before it plays the power off tone is too low.
Occasionally it causes the user to not hold the button long enough.
This corrects the delay before playing the power off tone.
 2018-11-24 11:13:25 +09:00