Randy Mackay
3ca520021b
Rover: version to 3.4.2-dev
2018-06-12 20:57:25 +09:00
Randy Mackay
a566ad48e9
Rover: 3.4.1-rc1 release notes
2018-06-12 20:56:50 +09:00
Randy Mackay
c650c52577
Rover: 3.4.0 release notes
2018-06-12 18:20:11 +09:00
Randy Mackay
5e7b37f0b2
AR_AttitudeControl: remove constraint on steering output
2018-06-12 17:44:10 +09:00
Randy Mackay
f0780c7bb1
AP_MotorsUGV: minor comment fix
2018-06-12 17:44:10 +09:00
Randy Mackay
1c0d9c7512
AP_MotorsUGV: MOT_SPD_SCA_BASE param for min speed scaling
...
This replaces the hardcoded 1m/s start point for speed scaling with a configurable value
2018-06-12 17:44:10 +09:00
Randy Mackay
5faff519c3
AP_MotorsUGV: steering limits and constraint done by each output handler
...
each motor output handler (regular, skid, omni) becomes responsible for constraining the steering input (if required) and setting the limits flags
it is possible to reduce duplicate code but I think it might be more important to keep it clear which level is responsible for the limiting and constraining of steering
2018-06-12 17:44:10 +09:00
Michael du Breuil
95eda5d9b7
RC_Channel: Remove unneeded interfaces
2018-06-11 16:29:36 -07:00
Michael du Breuil
c85f8c7bf5
Rover: Simplify radio trimming, improve MAVLink report
2018-06-11 16:29:36 -07:00
Michael du Breuil
12da35220c
Plane: Simplify radio trimming, improve MAVLink report
2018-06-11 16:29:36 -07:00
Randy Mackay
b69155793f
Rover: add Log_Write_Depth
2018-06-12 08:29:08 +09:00
Randy Mackay
d34c87a457
Rover: alphabetise Log_Write methods
2018-06-12 08:29:08 +09:00
Randy Mackay
c51b38cd1c
Rover: rename Log_Arm_Disarm to Log_Write_Arm_Disarm
2018-06-12 08:29:08 +09:00
Randy Mackay
10d89f1315
Rover: remove unimplemented Log_Write_Performance declaration
2018-06-12 08:29:08 +09:00
Michael du Breuil
9fbe6e624a
Git: Add .gdbinit to list of ignored files
2018-06-12 09:08:58 +10:00
Michael du Breuil
fae8d1e489
Plane: Log navigation target location
...
Closes #4358
2018-06-12 09:08:58 +10:00
Andrew Tridgell
b225868711
AP_Compass: detect conflict between AK09916 and ICM20948
...
this detects if we have both a AK09916 and an ICM20948 on the same i2c
bus. If that is found then the ICM20948 is disabled as it otherwise we
will have two devices on the same i2c address
2018-06-12 09:04:43 +10:00
Jacob Walser
c4175be7aa
AP_Camera: explicitly specify floats
2018-06-11 15:57:48 -04:00
Peter Barker
32b8b86019
Sub: move handling of MAV_CMD_DO_GRIPPER up
2018-06-11 19:07:39 +01:00
Peter Barker
955baa47c2
Copter: move handling of MAV_CMD_DO_GRIPPER up
2018-06-11 19:07:39 +01:00
Peter Barker
2cdcca2841
Plane: move handling of MAV_CMD_DO_GRIPPER up
2018-06-11 19:07:39 +01:00
Peter Barker
b0aeec4b6a
GCS_MAVLink: move handling of MAV_CMD_DO_GRIPPER up
2018-06-11 19:07:39 +01:00
Peter Barker
ef33d62cc3
mk: include Gripper in all builds
2018-06-11 19:07:39 +01:00
Peter Barker
684482295e
Tools: include Gripper in all builds
2018-06-11 19:07:39 +01:00
Peter Barker
8a3df17a07
AP_Gripper: add singleton
2018-06-11 19:07:39 +01:00
Alexander Malishev
289b93c3d0
HAL_ChibiOS: added parse_timer to chibios_hwdef.dat
2018-06-11 18:32:17 +10:00
apinxiko
e440583a7c
Copter: Beeping when first reaching waypoint while in holding there
2018-06-11 16:45:48 +09:00
apinxiko
5df4b9f6fd
Beeping when first reaching waypoint even while in holding there
2018-06-11 16:45:48 +09:00
chobits
75c2a2b02a
Copter: check for fence breaches when disarmed
2018-06-11 11:41:10 +09:00
murata
4d5e258b19
AP_NavEKF3: Delete unused definitions
2018-06-11 09:11:44 +09:00
murata
a9b2b9dddf
AP_NavEKF2: Delete unused definitions
2018-06-11 09:11:44 +09:00
Randy Mackay
631d8f5423
Rover: accept do-change-speed commands with high speeds
2018-06-11 09:10:35 +09:00
Randy Mackay
a08a955cbc
Rover: accept DO_CHANGE_SPEED commands
2018-06-11 09:10:35 +09:00
Randy Mackay
8464e82812
Rover: set_desired_speed range checks speed
2018-06-11 09:10:35 +09:00
Ammarf
b614ca9b75
AR_AttitudeControl: disable limits when _ACCEL_MAX is zero
2018-06-11 08:54:59 +09:00
Andrew Tridgell
d8a7618e15
Plane: update use of AC_Loiter controller for quadplane
...
this changes the way the loiter controller is initialised for QLOITER,
after discussions with Leonard.
The way we were doing it could cause a sudden acceleration demand when
switching into QLOITER.
This also changes the default loiter parameters to reduce the maximum
acceleration that will be applied in QLOITER. Many thanks to Leonard for
the advice
2018-06-11 08:40:58 +09:00
bnsgeyer
b4d2406062
Copter: Tradheli - fixes collective jump on rotor shutdown in althold and loiter
2018-06-11 08:39:27 +09:00
Carlos Martínez Úbeda
30e0c7f746
AP_HAL_SITL: use FD_CLOEXEC instead of linux SOCK_CLOEXEC for socket
2018-06-10 19:15:50 +01:00
Eugene Shamaev
56cc0d3ef7
AP_BoardConfig: comments
2018-06-09 22:46:48 -07:00
Eugene Shamaev
2055f264e5
AP_HAL_ChibiOS: helper func
2018-06-09 22:46:48 -07:00
Eugene Shamaev
df6b7ed5ea
AP_Compass_UAVCAN: update
2018-06-09 22:46:48 -07:00
Eugene Shamaev
9985d4a937
AP_GPS: uniform naming
2018-06-09 22:46:48 -07:00
Eugene Shamaev
13954f97cf
AP_Baro: helper func
2018-06-09 22:46:48 -07:00
Eugene Shamaev
f7e9ce44b1
AP_BattMonitor: helper func
2018-06-09 22:46:48 -07:00
Eugene Shamaev
9195ba80fc
AP_Compass: helper func
2018-06-09 22:46:48 -07:00
Eugene Shamaev
9f27a65f4b
AP_GPS: helper func
2018-06-09 22:46:48 -07:00
Eugene Shamaev
05c8d4cc36
AP_HAL_PX4: helper func
2018-06-09 22:46:48 -07:00
Eugene Shamaev
0e3ad3f48d
AP_HAL_VRBRAIN: helper func
2018-06-09 22:46:48 -07:00
Eugene Shamaev
71791d22cd
AP_UAVCAN: helper func
2018-06-09 22:46:48 -07:00
Eugene Shamaev
baa6daf270
AP_Compass: reducing indenting by linearizing the logic
2018-06-09 22:46:48 -07:00