Andrew Tridgell
2488c4fdc3
Copter: update docs on volt/current pin
2013-05-31 07:57:15 +10:00
Dr Gareth Owen
f175111243
added GPS check before mode change. New mode_requires_gps() function.
2013-05-30 20:33:15 +09:00
Andrew Tridgell
0e31a2f582
Copter: fixed indent-tabs-mode
2013-05-30 09:55:51 +10:00
Andrew Tridgell
30df8796ce
Copter: fixed loading of waypoints
...
copter code assumes that command_total includes the home waypoint
2013-05-29 21:44:08 +10:00
Andrew Tridgell
903d5636bb
Copter: added support for partial mission load
...
this allows individual waypoints to be updated in missions
2013-05-29 16:25:05 +10:00
Randy Mackay
c3d21a457f
Copter: add pre-arm board voltage check
...
Copter will not arm unless board voltage is over 4.5V
2013-05-28 21:50:31 +09:00
Randy Mackay
6ecd2d74a3
Copter: beep twice during arming
2013-05-27 13:55:34 +09:00
Randy Mackay
cdcf442f55
Copter: enable GPS failsafe by default
2013-05-27 11:25:37 +09:00
Randy Mackay
ec7ee47099
Copter: scaling stability patch
2013-05-27 11:21:31 +09:00
Randy Mackay
838fb3f4e2
Copter: don't spin motors in ALTHOLD with zero throttle
2013-05-27 10:42:22 +09:00
Randy Mackay
4fa101292a
Copter: add baro health to pre-arm checks
2013-05-25 12:24:47 +09:00
Randy Mackay
d1791bab76
Copter: fix barometer cli test
2013-05-25 12:21:29 +09:00
Dr Gareth Owen
1aca66460e
7 yaw when armed option changed so overridable by user
2013-05-24 11:14:06 +09:00
Randy Mackay
967aa81e9b
Copter: add XL-EZ4 to SONAR_TYPE parameter description
2013-05-23 09:46:57 +09:00
Randy Mackay
22e9b95c3c
Copter: version update to 3.0.0-rc3
2013-05-22 17:46:28 +09:00
Randy Mackay
72f29bd0db
Copter: remove debug message from compassmot
2013-05-22 11:30:30 +09:00
Randy Mackay
c404c46e5a
Copter: add Fence to CH7/CH8 param description
2013-05-21 16:31:16 +09:00
Andrew Tridgell
4508e645f1
Copter: fixed parameters to pass new script
2013-05-21 17:02:13 +10:00
Randy Mackay
bb3073fab1
Copter: minor parameter description fixes
2013-05-21 15:56:09 +09:00
Randy Mackay
5ee68db6f0
TradHeli: add parameter descriptions
...
small formatting changes too
2013-05-21 15:33:41 +09:00
Randy Mackay
9139fb54ac
Copter: param update for AP_Baro and AP_Scheduler
2013-05-21 14:22:11 +09:00
Randy Mackay
00bd1bf8ea
Copter: RESETTOARMEDYAW order and comments
...
We should keep the order in the case statement the same as the #define
order.
2013-05-21 10:58:34 +09:00
Dr Gareth Owen
f646b79e5f
indent correct again
2013-05-21 10:40:36 +09:00
Dr Gareth Owen
d9fc37c01c
indent correct
2013-05-21 10:40:34 +09:00
Dr Gareth Owen
e9d640ced8
added ch7 option to reset yaw back to what it was when quad was armed
2013-05-21 10:40:30 +09:00
Randy Mackay
db552adf02
Copter: typo in LOG_BITMASK param description
2013-05-21 10:30:59 +09:00
Randy Mackay
669850e6d4
Copter: add parameter description for LOG_BITMASK
...
Should allow a dropdown in the GCS so it can be set more easily without
going into the cli
2013-05-21 10:29:40 +09:00
Randy Mackay
bd44c2f73d
Copter: all pre-arm checks to be disabled
...
set ARMING_CHECK parameter to zero to disable
2013-05-20 14:48:04 +09:00
Randy Mackay
43c377ca67
Copter: add compass calibration to pre-arm check
2013-05-20 14:19:47 +09:00
Randy Mackay
6efdabb104
Copter: move auto disarm into a separate function
2013-05-20 14:05:50 +09:00
Randy Mackay
1dbe98b566
Copter: display reason for pre-arm-check failures in GCS
2013-05-20 13:03:18 +09:00
Randy Mackay
d10e3bc75f
Copter: send_text_P bug fix for short messages
2013-05-20 12:52:20 +09:00
Randy Mackay
885ce7db03
Copter: remove DigitalReadFast
...
With APHal all reads are fast
2013-05-20 11:29:34 +09:00
Randy Mackay
21f3534a93
Copter: remove DigitalWriteFast
...
With APHal all writes are fast
2013-05-20 11:27:35 +09:00
Randy Mackay
55f1b3b2ae
Copter: reorganise medium loop
...
Shifted compass logging to happen when compass is read.
Updated comments.
2013-05-20 11:18:51 +09:00
Randy Mackay
c840e2a8c2
Copter: code clean-up move 10hz loop after 50hz loop
2013-05-20 11:05:14 +09:00
Randy Mackay
f4846b417a
Copter: compiler fix for disabled logs
2013-05-19 22:55:40 +09:00
Randy Mackay
4ad395e7be
Copter: merge WPNAV into NTUN dataflash message
2013-05-19 22:53:35 +09:00
Randy Mackay
072f3dbe30
Copter: display interference % in compassmot
2013-05-19 22:03:48 +09:00
Randy Mackay
9fdab5e8fe
Copter: remove unused AUTO_SLEW_RATE parameter
2013-05-17 16:09:17 +09:00
Randy Mackay
8c99936431
Copter: update CH7_OPT, CH8_OPT to include Multi Mode
2013-05-17 16:07:11 +09:00
Randy Mackay
38239c652a
Copter: ch8 aux switch
...
Ch8 can be used as an aux switch like ch7. Has all the same options as
ch7 and there is a safety check to ensure both switches aren't set to
the same function so as to avoid interfering with each other
2013-05-17 14:42:28 +09:00
Randy Mackay
566daf883a
Copter: remove unused MODE bit from LOG_BITMASK
...
We always log the mode so no need for this bit
2013-05-17 12:26:42 +09:00
Randy Mackay
5b00ce24ed
Copter: minor user hooks cleanup
...
Only define and call functions if the appropriate #define in
APM_Config.h has been added
2013-05-17 12:19:07 +09:00
Randy Mackay
6a173eb7ad
Copter: remove unused dump_state function
...
Feel free to add this back in when doing debug. Let's not have too much
debug permanently in the code because it makes it harder to read.
2013-05-17 12:11:23 +09:00
Randy Mackay
1426f40319
Copter: remove unused JDrones motor PID overrides
2013-05-17 12:05:20 +09:00
Randy Mackay
19394918dd
Copter: simplify APM_Config.h
...
Remove items that can be more easily set with parameters
2013-05-17 12:01:39 +09:00
Randy Mackay
28c37dd798
Copter: do pre-arm checks when arming from GCS
2013-05-17 11:22:32 +09:00
Randy Mackay
9d0f40b432
Copter: add pre_arm_rc_check
...
Motors are not be enabled unless we have passed rc checks which include
checking the radio in calibration has been performed.
2013-05-16 16:32:00 +09:00
Randy Mackay
0540acfec9
Copter: change to compassmot instructions
2013-05-15 12:35:16 +09:00