Commit Graph

1604 Commits

Author SHA1 Message Date
rmackay9 e2b1cb7e8d AP_InertialSensor: changes after review with Tridge.
sanity checking added to accelerometer calibration routine.
user feedback is sent using gcs_send_text_fmt instead of Serial.printf.
moved ins parameters to new eeprom number to avoid conflicts with older parameters.
other small changes including renaming of functions and parameters.
2012-11-07 19:21:15 +09:00
rmackay9 0868917ff4 ArduCopter: move to use new INS library instead of IMU library 2012-11-07 19:21:09 +09:00
Andrew Tridgell 03974fa9db ACM: switch to GPS velocity numbers in GLOBAL_POSITION_INT
these numbers are much more useful than the redundent rotated ground
speed. They tell us exactly what the GPS is giving to AHRS
2012-11-05 15:23:41 +11:00
Jason Short 210148a432 ACM : Formatting 2012-10-28 12:12:38 -07:00
Jason Short 158c4f8d14 ACM : Formatting 2012-10-28 12:12:38 -07:00
Jason Short 0a68468610 ACM: Added simple mode bearing logging for bug hunting 2012-10-28 12:12:38 -07:00
Jason Short 9c40c11e7b ACM: Formatting 2012-10-27 14:13:46 -07:00
Jason Short 4eeaf4c984 ACM: Added notes, credit to decel code. added speed_min to calc. 2012-10-27 14:13:24 -07:00
Jason Short 1e35d3d534 ACM: config.h cleanup
Added LOG_ITERM default to enabled
2012-10-27 09:59:57 -07:00
rmackay9 2e6625b82c ArduCopter: change TOY_M throttle mode to THROTTLE_HOLD 2012-10-26 10:56:06 +09:00
rmackay9 e780bfd4c1 ArduCopter: remove some unhelpful constraints on nav_lat and nav_lon.
Increase other constraints from 3200 to 32000.  These constraints are there to ensure int32_t do not cause an overflow when added to an int16_t.
2012-10-24 22:04:35 +09:00
rmackay9 ab86eae860 ArduCopter: changed ACRO_ROLL_STABILIZE and ACRO_PITCH_STABILIZE to parameters
Changes on behalf of Leonard Hall
2012-10-23 21:30:50 +09:00
Andrew Tridgell 61f85d05cc ACM: save another 20 bytes 2012-10-22 18:59:51 +11:00
Andrew Tridgell e90d2138f2 ACM: saved some more memory for strings 2012-10-22 18:57:08 +11:00
rmackay9 7fb58fce87 ArduCopter: replace Serial.print with Serial.print_P to save memory.
Includes replacing flight_mode_strings with print_flight_mode function.
SendDebug macro replaced with direct Serial.print_P calls.
2012-10-22 16:45:24 +09:00
Jason Short fb9fe2c9a5 ACM : fix compiler warning on non returning function 2012-10-21 14:37:42 -07:00
Jason Short 97d3134ff0 ACM : Cast to int32_T
Don't think it really needs it, but I feel better with the cast.
2012-10-21 14:36:05 -07:00
Jason Short 96f0a32cd3 ACM Acceleration management
removed unused waypoint_radius var
removed slow_wp
updated speed management system to maintain a constant acceleration or deceleration of 1m/s
changed version to 2.8.1a
2012-10-21 14:32:39 -07:00
rmackay9 6a66fdace9 ArduCopter: updated firmware version to 2.8 2012-10-20 09:50:53 +09:00
rmackay9 4c7292e6ce ArduCopter: incremented eeprom format version to force users to accept the new defaults.
Particularly important is the roll-pitch I term move from the stabilize to rate controllers.
2012-10-19 16:14:51 +09:00
Pat Hickey 0dd0bd131a Update ArduCopter and ArduPlane dependencies on AP_Menu 2012-10-18 20:53:39 -07:00
Robert Lefebvre 9a20fe32fa Fixed that last commit
#define Stupid_Mistake
2012-10-18 16:50:42 -04:00
Robert Lefebvre 5f8f53ec0a Changed RLT Yaw Mode for TradHeli. Also a few comment cleanups. 2012-10-18 16:39:05 -04:00
rmackay9 d7c80fb025 ArduCopter: updated firmware version to 2.7.4-Zeta 2012-10-18 23:30:28 +09:00
rmackay9 3b631f1edd ArduCopter: integrated Leonard Hall's improved ACRO mode 2012-10-18 23:24:34 +09:00
rmackay9 e0727e6d31 ArduCopter: bug fix for telemetry not working on APM1.
SPI3 is also UART3.  On APM1 we use UART3 for telemetry and don't need SPI3.
2012-10-18 19:15:21 +09:00
rmackay9 9392c8cae2 ArduCopter: added spi_semaphore to stop conflicts between dataflash and optical flow sensor on APM1 2012-10-18 17:04:44 +09:00
rmackay9 0299e2b51e ArduCopter: removed deprecated mag offset routine.
Also removed commented-out block of code from navigation.pde.
2012-10-17 19:47:21 +09:00
rmackay9 f1fe5f303b ArduCopter: updated firmware version to 2.7.4-Epsilon 2012-10-17 19:27:11 +09:00
rmackay9 a4a2fad798 ArduCopter: more out-of-date commented out code removed 2012-10-17 19:25:14 +09:00
rmackay9 25b3acab8c ArduCopter: bug fix in earthframe->body frame translation.
Provided by Leonard Hall.

Also removed large unnecessary comments.
2012-10-17 19:15:25 +09:00
rmackay9 3a26606510 ArduCopter: reduced optical flow's I and IMAX terms 2012-10-17 17:47:43 +09:00
rmackay9 7228236db6 ArduCopter: updated firmware version to 2.7.4-Delta 2012-10-17 10:20:41 +09:00
rmackay9 7787bb4fd5 ArduCopter: bug fix for get_yaw_rate_stabilized_ef
Provided by Leonard Hall
2012-10-17 10:18:24 +09:00
Andrew Tridgell 33d9ae23ff battery: use set_pin() to allow pins to be changed at runtime 2012-10-16 17:20:49 +11:00
Robert Lefebvre 1e01a642bc Adding some comments to parameters. 2012-10-15 09:37:02 -04:00
rmackay9 025cc05cab ArduCopter: update version information ahead of testing 2012-10-15 18:15:38 +09:00
LeonardTHall 4203655646 New Yaw controller using rate feed forward and stabilize.
Signed-off-by: LeonardTHall <LeonardTHall@gmail.com>
2012-10-15 11:37:49 +09:00
rmackay9 ee41f3be6c ArduCopter: enable ACRO mode's AXIS_LOCK by default 2012-10-14 19:50:45 +09:00
rmackay9 254fff6acd ArduCopter: fixed acro mode
Changes included:
Removing earth frame roll_rate_trim, pitch_rate_trim and yaw_rate_trim.
Switch ACRO mode to use YAW_ACRO instead of YAW_HOLD.
Changed YAW_ACRO to use stabilize yaw when axis_enabled.
Reset ACRO roll, pitch and yaw targets to current attitude when first entering ACRO.
2012-10-14 17:47:46 +09:00
rmackay9 c201b3c35e ArduCopter: small comment fixes related to battery monitoring 2012-10-13 20:52:14 +09:00
rmackay9 71c773801a ArduCopter: added BATT_VOLT_PIN and BATT_CURR_PIN parameters to allow support for new 3DR IV battery voltage and current monitor 2012-10-13 18:40:46 +09:00
Robert Lefebvre 8e19e7d0b2 Added #define for Tilt_Compensation.
Also added some detail to WP_Speed_Max parameter.
2012-10-12 14:51:31 -04:00
Robert Lefebvre 446d8ee934 Added comment detail for Tilt_Comp Parameter.
Reduced parameter default value for TradHeli.
2012-10-11 13:17:39 -04:00
rmackay9 9052b4152b ArduCopter: remove unnecessary (probably slightly harmful) extra barometer read
The barometer reads including reading temperature was all moved to a timer but this extra read (originally to read the temperature) was probably forgotten.
2012-10-11 18:31:10 +09:00
rmackay9 b5c1e23549 ArduCopter: changed sin_pitch and sin_roll to faster equivalents 2012-10-11 17:54:42 +09:00
rmackay9 a5feda6b1f ArduCopter: set default rate roll and pitch I terms to 0.010, and rate yaw to 0.015
Updated after discussing with Marco
2012-10-11 17:25:01 +09:00
rmackay9 94d16d426f ArduCopter: move I terms from stabilize to rate controllers 2012-10-11 17:20:05 +09:00
rmackay9 be25e75d75 ArduCopter: freeze I terms if motor limits breached 2012-10-11 17:20:00 +09:00
Andrew Tridgell 2af5ff896d ACM-HIL: fixed optflow declaration 2012-10-11 11:51:25 +11:00