Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
8,534 Commits 70 Branches 507 Tags 620 MiB
Commit Graph

8534 Commits

Author SHA1 Message Date
Andrew Tridgell b37f79d307 Plane: update for new APM_Control API 2013-07-13 21:45:58 +10:00
Andrew Tridgell cc778a68ae APM_Control: changed attitude controllers to take angular error not angle 
this makes it easier for ACRO mode
 2013-07-13 21:45:58 +10:00
Andrew Tridgell b721bcc129 AP_AHRS: removed get_roll_rate_earth() and get_pitch_rate_earth() 
these are not used any more
 2013-07-13 21:45:58 +10:00
Andrew Tridgell 113bc20f8a Plane: added a new CRUISE flight mode 
See
http://diydrones.com/group/apmusergroup/forum/topics/feature-request-hold-heading-mode

this fixes issue #438
 2013-07-13 21:45:58 +10:00
Randy Mackay 213472102c Copter: pre-arm check of throttle failsafe value 
Check throttle min is above throttle failsafe trigger and that trigger
is above ppm encoder's loss-of-signal value of 900
 2013-07-13 20:25:34 +09:00
Randy Mackay 6bfcd28ade Copter: thr failsafe will not RTL if in batt failsafe 
resolves issue #413
 2013-07-13 19:49:25 +09:00
Andrew Tridgell 399970e76f Plane: fixed default deadzone for the throttle channel 
this is the 2nd half of the fix for issue #303
 2013-07-13 13:19:25 +10:00
Andrew Tridgell 21859f9364 RC_Channel: fixed dead_zone for range channels 
The dead_zone was being used inconsistently, used in PWM space in one
place, and in control output space in another.

The fix required us to move the index number of the RC channel eeprom
value for RCn_DZ, as users will have a throttle deadzone of 3 set in
their eeprom due to a bug that Randy just fixed that caused the value
to always be saved to eeprom. In plane we then need to fix the
deadzone for the throttle to be 30

this fixes issue #303

Thanks to Soren Kuula for spotting this!
 2013-07-13 13:18:54 +10:00
Andrew Tridgell 086e8f80dc AP_AHRS: fixed spin rate gain conversion from degrees to radians 
fixes issue #433

Thanks Jurgen!
 2013-07-13 12:36:25 +10:00
Andrew Tridgell 826ad6c086 Plane: unlock roll and pitch when we enter ACRO mode 2013-07-13 12:34:34 +10:00
Randy Mackay effc829790 INS: relax accel offset check to 3.5 m/s/s 
One user, Dusty, has found that even with offsets of 3.1 m/s/s
successful alt hold and loiter are possible
 2013-07-13 10:43:07 +09:00
Randy Mackay 5a40ee7a38 Copter: fix to gps present check in mavlink extended status 1 msg 2013-07-13 10:27:50 +09:00
Randy Mackay 1772a62415 Plane: fix to gps present check in mavlink extended status 1 msg 2013-07-13 10:27:39 +09:00
Randy Mackay 66d7f7b026 Copter: GCS_mavlink only send waypoints to gcs3 if initialised 
Also Load parameter defaults at initialisation (although defaults are
all zero anyway so should have no effect)
 2013-07-13 10:12:01 +09:00
Randy Mackay aefb38e486 Copter: remove param to disable accel based throttle controller 2013-07-12 22:57:30 +09:00
Randy Mackay d5b4c44926 Copter: comment fix for flight mode switch delay const 2013-07-12 22:29:14 +09:00
Rayjan Wilson 07ca8ef87a attempt to change from 1/10th second to 2/10th second on flight mode switch 2013-07-12 21:57:35 +09:00
Randy Mackay 53bff2b63e Copter: cli to report ch8 radio values 2013-07-12 21:46:03 +09:00
Andrew Tridgell ea9ae31a7a Plane: fixed a bug with altitude drift in FBWB mode 
not taking account of deadzone correctly
 2013-07-12 21:17:09 +10:00
Andrew Tridgell cc57bfcf12 Plane: fixed handling of deadzone in ACRO mode 
RC_Channel norm_input() does not take account of the dead zone
 2013-07-12 17:54:51 +10:00
Randy Mackay 110966c186 AP_TECS: compile error fix for size_of(log_tuning) 2013-07-12 11:45:02 +09:00
Randy Mackay fb5ada38c0 RC: example sketch uses set_default_dead_zone 2013-07-12 11:44:58 +09:00
Randy Mackay 2f4221391e Copter: set_dead_zone renamed to set_default_dead_zone 
Dead zones now set as part of rc initialisation instead of only after
eeprom is erased.
Change in use of parameter means value passed in should be 1/2 what it
was previously
 2013-07-12 11:44:23 +09:00
Randy Mackay 32b5169bb9 Rover: set_dead_zone renamed to set_default_dead_zone 
Change in use of parameter means value passed in should be 1/2 what it
was previously
 2013-07-12 11:44:20 +09:00
Randy Mackay 9df93881fb Plane: set_dead_zone renamed to set_default_dead_zone 
Change in use of parameter means value passed in should be 1/2 what it
was previously
 2013-07-12 11:44:18 +09:00
Randy Mackay 47437b9ddf RC: set dead zone only if parameter has not been set by user 2013-07-12 11:44:16 +09:00
Andrew Tridgell f300df5fd1 Plane: added FS_LONG_TIMEOUT and FS_SHORT_TIMEOUT parameters 
this is to address the issue raised here:

http://diydrones.com/forum/topics/ardupilot-circle-mode
 2013-07-12 11:56:04 +10:00
Randy Mackay 1685ff274d TradHeli: compile error fix related to new ACRO 
The motors_runup_complete must be a feature that Rob has implemented in
his clone which has not yet reached master.  We will need to restore
these lost few trad-heli specific lines once Rob's changes make it to
master.
 2013-07-11 22:33:55 +09:00
Leonard Hall 64ce9b017d Copter: Body frame ACRO upgrade 2013-07-11 17:53:25 +09:00
Randy Mackay 6dd446ac79 Copter: firmware version to 3.0.1 2013-07-11 16:45:05 +09:00
Randy Mackay 012d7b0c0a OptFlow: initialisation fix 
Thanks to DongFang (aka Soren) for finding the issue and the solution
 2013-07-11 14:14:37 +09:00
Andrew Tridgell 5ae62f4f04 Copter: fixed build with specified GPS driver 2013-07-11 14:27:42 +10:00
Andrew Tridgell 131aa53e42 AP_Relay: update for new PX4 relay pin 2013-07-11 13:50:23 +10:00
Andrew Tridgell 83b13c3d88 HAL_PX4: fixed definition of relay and piezo pins 2013-07-11 13:50:23 +10:00
Andrew Tridgell 0916388ab5 HAL_PX4: retry opening UARTs up to 5 times 
this seems to help a lot with the USB port on PX4
 2013-07-11 13:50:23 +10:00
Marco Bauer ae2ee399c2 PX4: added support for mkblctrl driver 
this enables runtime support for the mkblctrl I2C ESC drivers
 2013-07-11 13:50:22 +10:00
Marco Bauer c7c0fc01c3 PX4: enable mkblctrl driver 2013-07-11 13:50:22 +10:00
Marco Bauer 72d0721721 AP_Relay: setup pin for PX4 relay support 2013-07-11 13:50:22 +10:00
Marco Bauer a3b216bce3 HAL_PX4: added GPIO driver 2013-07-11 13:50:22 +10:00
Randy Mackay ac5d925115 Copter: revert Loiter Pos P to 1.0 (was 0.8) 2013-07-11 12:20:31 +09:00
Randy Mackay 1590a5d58a Copter: increase Yaw Rate I 0.02 2013-07-11 12:20:29 +09:00
Randy Mackay ab1a7baf71 Copter: project stopping point for loiter command 2013-07-11 11:39:47 +09:00
Randy Mackay bf5a50f738 WPNav: stopping point projection uses wp_leash 2013-07-11 11:39:44 +09:00
Kevin Hester 1c5ddc20ca documentation: minor fix to px4 build instructions (tridge please check) 2013-07-11 12:37:44 +10:00
Andrew Tridgell 73928b82a6 Plane: fixed FBWB airspeed control 
thanks to Gabor for reporting this!
 2013-07-11 11:58:54 +10:00
Andrew Tridgell 1d04290eab Plane: change to 2.74beta3 2013-07-11 11:58:54 +10:00
Randy Mackay d77f7bc803 Copter: default Loiter Pos P to 0.8 (was 0.2) 2013-07-11 08:13:17 +09:00
Andrew Tridgell 11a4628409 Plane: added ACRO mode to mode choices 2013-07-11 09:10:41 +10:00
Andrew Tridgell fc67f51901 Plane: added ACRO_ROLL_RATE and ACRO_PITCH_RATE parameters 
default to 180 degrees/second, which seems reasonable
 2013-07-11 09:10:41 +10:00
Andrew Tridgell 608007361b Plane: added initial implementation of ACRO mode 
rate based control with attitude locking
 2013-07-11 09:10:41 +10:00