Randy Mackay
130eb07d48
AC_AttControl: angle_ef_roll_pitch_rate_ef_yaw supports zero yaw accel
2014-06-10 20:02:58 +09:00
Randy Mackay
02b4b21f67
AC_AttControl: disable feed forward by default
...
Can be re-enabled by setting ATC_RATE_FF_ENAB parameter to 1
2014-06-10 20:02:55 +09:00
Randy Mackay
b57c0dabf6
AC_AttControl: check accel_rp_max instead of rate_bff_ff_enabled
...
We use the accel_rp_max, accel_y_max to check whether to apply accel
limiting or not. This is related to separate from the
body-frame-feed-forward.
2014-06-10 20:02:54 +09:00
Randy Mackay
2bb30b3ef9
AC_AttControl: add set_yaw_target_to_current_heading method
2014-06-10 20:02:49 +09:00
Randy Mackay
d9c966c927
AC_AttControl: RATE_FF_ENAB param to disable rate feed forward
2014-06-10 20:02:48 +09:00
Randy Mackay
4d4c7a2118
AC_AttControl: move freeze_ff to flags structure
2014-06-10 20:02:46 +09:00
Randy Mackay
a662f87ffb
AC_AttControl: remove resolved To-Do
...
This To-Do is resolved by heli flight modes calling the
relax_bf_rate_controller method
2014-06-10 20:02:45 +09:00
Randy Mackay
7f734f38d6
AC_AttControl: add earth frame angle constraints
...
This should help recovery time if pilot switches out of ACRO (into
Stabilize, AltHold, etc) while inverted
2014-06-10 20:02:43 +09:00
Randy Mackay
698cf934b8
AC_AttControl: formatting fixes
2014-06-10 20:02:42 +09:00
lthall
2bb63857fa
AC_AttControl: clean up stabilize
2014-06-10 20:02:40 +09:00
lthall
c24d293e1b
AC_AttControl: zero _accel_xyz_max stops feed forward
...
Also added place holder for turning off feed forward.
2014-06-10 20:02:39 +09:00
lthall
8bbce7e658
AC_PosControl: freeze feed forward for alt control in Auto
2014-06-10 20:02:36 +09:00
lthall
922026c15c
AC_AttControl: rate compensation for yaw
2014-06-10 20:02:34 +09:00
lthall
0d87298221
AC_PosControl: freeze feed forward and vector fixes
2014-06-10 20:02:33 +09:00
Randy Mackay
5209598459
AC_AttControl: rename init_targets to relax_bf_rate_controller
2014-06-10 20:02:27 +09:00
lthall
1bdde31f6b
Copter: Fix zero throttle flip issue Stabilize
...
The problem is that the init_targets is intended to ensure the
controller doesn't build up the I term when the throttle is low. Because
it is poorly named (or used) it have been written to do something else.
Here I change it to do what the code is trying to use it to do.
2014-06-10 20:02:01 +09:00
Randy Mackay
915dad2da4
AC_Circle: use fast_atan2 to calc bearing from center
...
This does not save much time because it's only called at initialisation
2014-06-06 18:51:09 +09:00
Randy Mackay
f23e94707c
AC_WPNav: use fast_atan2 for bearing calcs
2014-06-06 18:51:08 +09:00
David Dewey
17374ff5e8
AP_Math: fast_atan2
...
This is 126us per call vs 199us on the AVR. it is accurate to about
0.28 degrees
Committed by rmackay9 but contribution is from David Dewey
2014-06-06 18:50:41 +09:00
Ju1ien
28ce66f314
INav: clear historic z-axis position estimate when set_altitude called
2014-06-06 18:42:42 +09:00
Randy Mackay
efd6d6dc70
AC_WPNav: spline div by zero fix
...
Also add check for straight line navigation to ensure speed is not
reduced below zero when it hits the leash limit
Also minor formatting changes
2014-06-05 22:23:38 +09:00
lthall
0912bec8f5
Spline div zero and leash limit fix
2014-06-05 22:23:35 +09:00
Andrew Tridgell
f0df912a11
AP_Mission: added support for MAV_CMD_DO_INVERTED_FLIGHT
2014-06-05 15:44:18 +10:00
Andrew Tridgell
ef4a79cc9a
GCS_MAVLink: rebuild MAVLink headers
2014-06-05 15:44:03 +10:00
Andrew Tridgell
67937b5b79
GCS_MAVLink: added MAV_CMD_DO_INVERTED_FLIGHT
...
used to invert from a mission
2014-06-05 15:43:46 +10:00
Andrew Tridgell
5a1aa8dfe7
AP_L1_Control: implement turn_distance() with turn angle
...
uses a linear approximation for now.
2014-06-05 09:34:23 +10:00
Andrew Tridgell
7a6186f7e6
AP_Navigation: added a turn_distance() method with turn_angle
2014-06-05 09:33:42 +10:00
Andrew Tridgell
49f93b91b2
APM_OBC: fixed formatting to match APM coding standard
2014-06-02 10:47:02 +10:00
Andrew Tridgell
e9e1799700
AP_Compass: fixed VRBrain build
2014-06-02 10:42:37 +10:00
Andrew Tridgell
d554616e86
AP_EPM: fix for HAL_GPIO_*
2014-06-02 10:42:36 +10:00
Andrew Tridgell
3705c90b8e
AP_Baro: fix for HAL_GPIO_*
2014-06-02 10:42:36 +10:00
Andrew Tridgell
d70bee9249
AP_AHRS: fix for HAL_GPIO_*
2014-06-02 10:42:36 +10:00
Andrew Tridgell
0d83d4f4f5
APM_OBC: fix for HAL_GPIO_*
2014-06-02 10:42:36 +10:00
Andrew Tridgell
1e2214f8d1
DataFlash: fix for HAL_GPIO_*
2014-06-02 10:42:36 +10:00
Andrew Tridgell
732cd0e130
AP_Relay: fix for HAL_GPIO_*
2014-06-02 10:42:36 +10:00
Andrew Tridgell
50c08ced4c
AP_Notify: fixes for HAL_GPIO_*
2014-06-02 10:42:35 +10:00
Andrew Tridgell
4c43cd9775
AP_InertialSensor: fixes for HAL_GPIO_*
2014-06-02 10:42:35 +10:00
Andrew Tridgell
805d79debe
HAL_FLYMAPLE: fix for HAL_GPIO_*
2014-06-02 10:42:35 +10:00
Andrew Tridgell
3015356671
HAL_AVR: fixes for HAL_GPIO_ define change
2014-06-02 10:42:35 +10:00
Andrew Tridgell
18a64d17d3
AP_HAL: added HAL_ prefix to GPIO_ defines
...
this fixes a bug caused by GPIO_INPUT and GPIO_OUTPUT already being
defined in NuttX, which caused pinMode() not to setup pins for output
when requested
2014-06-02 09:24:52 +10:00
Andrew Tridgell
fa4eb5475a
HAL_PX4: implement analog input stop pins
...
this allows multiple sonars to cooperate without interference
2014-06-02 08:35:41 +10:00
Randy Mackay
2b0f142a17
AC_PosControl: fix typo in D-filter definition
2014-05-29 17:50:48 +09:00
Randy Mackay
7e3213edbf
AC_AttControl: increase default accel max
2014-05-29 17:40:26 +09:00
Randy Mackay
29ca7a10df
AC_PosControl: set alt hold accel control D term filter
2014-05-29 17:40:23 +09:00
Randy Mackay
0969e464fb
AC_AttControl: set roll, pitch, yaw rate control D term filters
2014-05-29 17:40:17 +09:00
Randy Mackay
faf3415e5e
AC_PID: example sketch prints individual P, I and D values
2014-05-29 17:39:19 +09:00
Robert Lefebvre
b35ec4339e
AC_PID: Add method to set the D-term Filter Rate from main code.
2014-05-29 17:39:10 +09:00
Robert Lefebvre
f1c3f2a3d1
AC_PID: Remove get_leaky_i function which is now found in AC_HELI_PID.
2014-05-29 17:39:08 +09:00
Robert Lefebvre
7c9249de93
AC_AttitudeControl_Heli: Change to use AC_HELI_PID class instead of AC_PID. Remove FF parameters from class.
2014-05-29 17:39:06 +09:00
Robert Lefebvre
6333b4bba6
AC_PID: update example sketch to test AC_HELI_PID
2014-05-29 17:39:01 +09:00
