Peter Barker
9f6b9c7519
GCS_MAVLink: move from HAL_NO_GCS to HAL_GCS_ENABLED
2021-09-22 21:37:00 +10:00
Andrew Tridgell
ae615de4ce
GCS_MAVLink: added logging of NAMED_VALUE_FLOAT
...
this is useful when running sensors on a companion computer and
wanting values logged in main ArduPilot log.
2021-09-01 17:52:48 +10:00
olliw42
bacfe82c66
GCS_MAVLINK: add receiver_rssi() method, and use it
2021-08-26 09:44:59 +10:00
Andrew Tridgell
5c3056e50d
GCS_MAVLink: added MCU_STATUS message
2021-08-25 07:11:31 +10:00
Randy Mackay
2fba31332b
GCS_MAVLink: support MAV_CMD_SET_EKF_SOURCE_SET command
...
this allows external systems to set the active EKF source set
2021-08-19 12:11:08 +10:00
Peter Barker
a91d30369e
GCS_MAVLink: stop sending SENSOR_OFFSETS
...
Only works for first compass instance.
We have all of these in parameters anyway.
2021-08-18 18:06:24 +10:00
Peter Barker
784c56f6d0
GCS_MVALink: remove virtual from send_simstate
...
No longer overridden by anyone
2021-08-10 09:48:34 +10:00
bugobliterator
3d03979b16
GCS_MAVLink: add support for mavlink out on AP_Periph
2021-07-26 13:45:43 +10:00
Stephen Dade
035f65fe03
GCS_MAVLink: Add support for HIGH_LATENCY2 messages
2021-07-07 17:10:05 +10:00
Randy Mackay
3900a4f14a
GCS_MAVLink: send water depth and temp
2021-06-30 12:05:09 +09:00
Peter Barker
84603e2c85
GCS_MAVLink: add support for MAV_CMD_RUN_PREARM_CHECKS
2021-06-21 09:41:17 +10:00
Peter Barker
a23999d0f0
GCS_MAVLink: remove HIL support
2021-06-15 09:47:31 +10:00
Peter Barker
c43965f32e
GCS_MAVLink: correct decimation of SENSOR_STATUS message
...
static infers shared between all backends
2021-06-15 07:07:39 +10:00
Andrew Tridgell
96577b47f0
GCS_MAVLink: removed perf counters
2021-06-07 14:29:27 +10:00
Peter Barker
09f4961a63
GCS_MAVLink: increase statustext queue size to 7 on low-mem boards
...
... and SITL....
Copter currently spits out so many messages on a banner-send (e.g what
we do when parameters are fetched) that it puses the first sent message
straight out of the queue before it gets a chance to be sent from the
queue.
2021-05-27 12:39:04 +10:00
Andrew Tridgell
8444a3310d
GCS_MAVLink: added handle_command_landing_target()
...
used to allow vehicle handling of time corrected LANDING_TARGET msgs
2021-04-13 17:30:19 +10:00
Peter Barker
9471d8069c
GCS_MAVLink: move handling of last-seen-SYSID_MYGCS up to GCS base class
2021-04-07 17:54:21 +10:00
Peter Barker
1a2b960b0d
GCS_MAVLink: prune old statustexts from queue
2021-04-06 09:10:43 +10:00
Peter Barker
4027ed6070
GCS_MAVLink: make servicing statustext more efficient
...
We should only need to do a single PAYLOAD_SIZE check for each mavlink
backend now.
- stop iterating over all channels, only do instantiated mavlink
backends
- if we don't have space for a statustext on a channel, break
immediately and don't do remaining texts
- resposibility is now on the GCS_MAVLINK backend for sending texts
- that's a timing change
- only iterate over entries actually in the queue rather than maximum
queue size
- it's likely to be the full length anyway as we don't expire things
from the queue and most setups will have full channels
2021-04-06 09:10:43 +10:00
Peter Barker
2d61ded1f3
GCS_MAVLink: add option to execute auxillary functions via mavlink
2021-03-31 11:36:09 +11:00
Peter Barker
5123b05b2b
GCS_MAVLink: add support for ATTITUDE_QUATERNION
2021-03-13 09:44:12 +11:00
Peter Barker
e3de88d1d4
GCS_MAVLink: handle MAV_CMD_DO_SET_MISSION_CURRENT
2021-03-04 11:59:33 +11:00
Peter Barker
cfe9dc32d1
GCS_MAVLink: only send distance_sensor messages if valid data seen
...
In the case you only have a forward-pointing LIDAR we'd send messages
for each of the other orientations from proximty's horizontal-distances
array, chewing up bandwidth and processing time.
2021-02-23 10:02:47 +09:00
Peter Barker
1afa0a7ff2
GCS_MAVLink: remove unused member
...
and a bogus comment
2021-02-20 21:48:25 +11:00
Peter Barker
eefcc92f24
GCS_MAVLink: take MAV_CMD_DO_SPRAYER as a mavlink command
2021-02-16 22:36:43 +11:00
Patrick José Pereira
e8e41c512e
GCS_MAVLINK: Add missing const in member functions
...
Signed-off-by: Patrick José Pereira <patrickelectric@gmail.com>
2021-02-03 18:45:14 +11:00
Rishabh
a5fafe57d8
GCS_MAVLink: Add support for OBSTACLE_DISTANCE_3D
2021-02-01 14:34:13 +09:00
Pierre Kancir
30a4747898
GCS_MAVLink: send sim_state msg
2021-01-19 10:40:43 +11:00
Peter Barker
3d577d94e8
GCS_MAVLink: add do_disarm_checks boolean to disarm call
...
this creates symmetry between arming and disarming, at least as far as
the top-level arm() and disarm() calls are concerned.
2021-01-12 08:48:44 +09:00
Peter Barker
0052500d67
GCS_MAVLink: split out a handle_command_component_arm_disarm
2021-01-12 08:48:44 +09:00
Brad Bosch
a2192eda5e
GCS_MAVLink: use RADIO_STATUS message txbuf field
...
this avoids overrunning radio buffer in queued_param_send()
2021-01-12 10:46:15 +11:00
Andrew Tridgell
8b5ff1a6de
GCS_MAVLink: enable GCS_SEND_TEXT() to send as CAN LogMessage messages
2020-12-04 15:16:21 +11:00
Andrew Tridgell
9c74474196
GCS_MAVLink: setup baudrates for passthru serial ports
2020-11-17 10:26:14 +11:00
Andrew Tridgell
e346cd3c80
GCS_MAVLink: fixed use of incorrect millis16() values
2020-10-12 13:48:15 +11:00
Peter Barker
7cb8cde417
GCS_MAVLink: move orderly rebooting code from GCS into AP_Vehicle
...
Several places we reboot the vehicle we should probably do several of
the things done in this code - flushing parameters, forcing safety on
etc.
2020-09-29 18:07:59 +10:00
yaapu
e7a49dd624
GCS_Mavlink: refactor zero_rc_outputs() out of GCS_Mavlink
2020-09-29 18:07:59 +10:00
Andy Piper
8b766efb0a
GCS_MAVLink: add support for updating OSD parameters over mavlink
2020-09-09 20:36:42 +10:00
Randy Mackay
1a3ef62b84
GCS_MAVLink: add virtual send_winch_status
2020-08-07 21:55:07 +09:00
Dr.-Ing. Amilcar do Carmo Lucas
7067cbdafd
GCS_Mavlink: Adapt to upstream mavlink changes to the SCALED_PRESSURE message
2020-07-29 14:34:22 +10:00
Andrew Tridgell
9466e7e71e
GCS_MAVLink: make correct_offboard_timestamp_usec_to_ms protected
...
for use by vehicle code
2020-07-10 13:28:38 +10:00
Peter Barker
e2056f56e3
GCS_MAVLink: support for sending generator message
2020-07-03 08:21:42 +09:00
Michael du Breuil
7fae084793
GCS_MAVLink: Only send a single battery status per call
2020-06-23 09:18:56 +10:00
chobits
991387dbfb
GCS_MAVLink: support covariance field in vis pose msg
2020-06-09 13:31:21 +09:00
Peter Barker
f158533fe9
GCS_MAVLink: allow private channels to also be active
...
This will allow for logging of private channels.
2020-06-09 10:37:32 +10:00
Peter Barker
b428f12913
GCS_MAVLink: add and use accessor for last-RADIO_STATUS.remrssi-ms
2020-06-09 10:20:29 +10:00
Peter Barker
07e3f1d48f
GCS_MAVLink: add RADIO_STATUS.rssi as an AP_RSSI telemetry source
2020-06-09 10:20:29 +10:00
chobits
ff6e4c4f9a
GCS_MAVLink: support VISION_SPEED_ESTIMATE
2020-06-01 17:51:24 +09:00
Andrew Tridgell
87c2858bde
GCS_MAVLink: give banner on param download with ftp
...
thanks to Peter for noticing
2020-05-10 15:10:21 +10:00
Andrew Tridgell
7cd901fa5b
GCS_MAVLink: enable ftp without filesystem
...
allows for @PARAM and @SYS
2020-04-29 07:36:55 +10:00
Andrew Tridgell
6811d79b6f
GCS_MAVLink: define GCS_SEND_TEXT() globally
...
used to avoid linking GCS in AP_Periph
2020-04-29 07:36:55 +10:00
Peter Barker
26b88823f4
GCS_MAVLink: correct out-of-space-to-send call in HAVE_PAYLOAD_SPACE
2020-04-27 15:30:30 +10:00
Randy Mackay
6f8176c71e
GCS_MAVLink: remove ahrs3
2020-04-22 14:11:17 +09:00
Peter Barker
8b9281eaa1
GCS_MAVLink: log number of times message not sent due to no space
2020-04-17 22:21:14 +10:00
Peter Barker
41ada7f8f4
GCS_MAVLink: document the payload-space macros
2020-04-17 10:20:49 +10:00
Randy Mackay
c39fef6c56
GCS_MAVLink: pass vision-position-estimate reset_counter to AP_VisualOdom handler
2020-04-14 10:28:03 +10:00
Randy Mackay
a9c1eb5af4
GCS_MAVLink: fill in sys_status vision position bits
2020-04-09 19:41:08 +09:00
Randy Mackay
728e8b45a9
GCS_MAVLink: use AP_VisualOdom to handle vision-position-estimate messages
2020-04-09 19:41:08 +09:00
Peter Barker
ca7fcc093c
GCS_MAVLink: correct return type on get_stream_slowdown_ms
...
Only used in one place. On slow links may have caused us to re-request
a waypoint too often. "Too often" is still >1s intervals.
2020-03-31 11:15:04 +11:00
Randy Mackay
ecf5abc1f2
GCS_MAVLink: minor format fix
2020-03-30 20:20:08 +09:00
Andrew Tridgell
8a84dbc19e
GCS_MAVLink: slow down telemetry during ftp
2020-03-28 15:28:03 +11:00
Peter Barker
fbe2e75b9f
GCS_MAVLink: divide time allowed to send messages fairly
2020-02-27 08:49:59 +11:00
Peter Barker
727c12c388
GCS_MAVLink: move initialisation of serial and gcs to AP_Vehicle
2020-02-25 11:50:55 +11:00
Peter Barker
1650979a2b
GCS_MAVLink: add support for MAV_CMD_DEBUG_TRAP
2020-01-29 10:27:01 +11:00
Peter Barker
e248bdfb16
GCS_MAVLink: split statustexts into 50-byte chunks using mav2 extensions
2020-01-28 19:56:38 +11:00
Peter Barker
a9f62f196e
GCS_MAVLink: consolidate places we snprintf statustexts
2020-01-14 10:38:43 +11:00
Peter Barker
01710c035e
GCS_MAVLink: handle proximity and rangefinder messages
2019-12-24 12:08:54 +11:00
Andrew Tridgell
dd73eac08c
GCS_MAVLink: support MAV_CMD_FIXED_MAG_CAL_YAW
2019-12-18 17:20:37 +11:00
Peter Barker
ebbcd00873
GCS_MAVLink: send statustext to all GCSs until update_send is called
...
until update_send it called we don't mark channels as streaming, so
send_statustext won't send to that channel.
Calculating the streaming mask could have been done as part of the init
call, but this fix may allow for information getting to the user in the
case that the streaming parameters are all zero, too.
2019-12-18 14:36:58 +11:00
Peter Barker
b48da34c61
GCS_MAVLink: move setting of GPS SYS_STATUS bits up to base class
2019-12-05 13:02:19 +11:00
Peter Barker
314ea32ede
GCS_MAVLink: any internal error means MAV_STATE_CRITICAL
2019-11-27 14:27:53 +11:00
Marian Soban
6e961b55eb
GCS_MAVLink: LTM telemetry support
2019-11-26 12:14:13 +11:00
Peter Barker
a96a4c0510
GCS_MAVLink: correct encoding used for send_to_components
...
These have to be packed onto the channel - otherwise they may ge
tencoded as mavlink1 instead of mavlink2 (or vice-versa)
2019-11-26 12:10:12 +11:00
Peter Barker
7d2557b316
GCS_MAVLink: correct txspace return value issues
...
- checking of space in send_to_active_channels was incorrect - did not
take into account locked status of the channel
- corrected return value on comm_get_txspace - took a uint32_t, cast it
to int16_t, checked it for zero, then cast it to uint16_t on return.
That's just... odd.
2019-11-12 16:33:12 +11:00
Peter Barker
a893a5483c
GCS_MAVLink: support sysid targetting
2019-11-12 07:52:22 +08:00
Andrew Tridgell
43da68ae59
GCS_MAVLink: added ftp_push_replies()
2019-11-02 22:52:06 +11:00
Andrew Tridgell
00549d13fa
GCS_MAVLink: rename emit_dir_entry to gen_dir_entry
...
comment from Sid
2019-11-02 22:52:06 +11:00
Michael du Breuil
6f538dd45a
GCS_MAVLink: Initial FTP support
2019-11-02 22:52:06 +11:00
Michael du Breuil
cb1b236439
GCS_MAVLink: Use the vehicle singleton to directly set the flight mode
2019-10-25 08:48:22 +08:00
Randy Mackay
7ce2fb8783
GCS_Mavlink: handle_preflight_reboot made virtual
2019-10-15 07:41:44 +09:00
Do Carmo Lucas
dc4ad26e96
GCS_MAVLink: updates to support the latest stable mavlink changes (IMU temperature extension)
2019-10-10 13:23:03 +11:00
Randy Mackay
8686197c59
GCS_MAVLink: add comment above set-message-interval
2019-10-02 16:17:09 +09:00
Tatsuya Yamaguchi
9a99d9bff5
GCS_MAVLink: add set_message_interval functions
2019-10-02 16:09:44 +09:00
Andrew Tridgell
0deef76875
GCS_MAVLink: use HAL_MEM_CLASS for status sizes
2019-10-01 09:29:55 +10:00
Peter Barker
6d0c5da84a
GCS_MAVLink: allow upload of fence using mission item protocol
...
GCS_MAVLink: add support for fence inclusion circles
GCS_MAVLink: factor out a transfer_is_complete; start commenting properly
2019-09-28 07:58:48 +09:00
Peter Barker
2f60b230cd
GCS_MAVLink: use singleton to get AP_AdvancedFailsafe pointer
2019-09-17 09:13:43 +10:00
Peter Barker
8fc55b9678
GCS_MAVLink: remove comm_get_available
...
available returns an unsigned integer, so this was just weird
2019-09-10 15:45:27 +10:00
Peter Barker
df5921a87c
GCS_MAVLink: gate AP_DEVO_Telem behind !HAL_MINIMIZE_FEATURES
2019-09-04 17:47:33 +10:00
Michael du Breuil
a74f00d045
GCS_MAVLink: Remove single use method
2019-09-03 14:35:17 +10:00
Peter Barker
5d9b332bcb
GCS_MAVLink: log exectuted COMMAND_LONG and COMMAND_INT packets
2019-08-27 09:32:00 +10:00
Andrew Tridgell
cfc37f2089
GCS_MAVLink: log corrected timestamp for vision data
...
this allows for debugging of link lag issues
2019-08-26 12:27:31 +10:00
Peter Barker
052e721622
GCS_MAVLink: tweak timings debug messages
2019-08-24 15:33:50 +10:00
Peter Barker
4f9d1ada33
GCS_MAVLink: deny setting MIS_TOTAL parameter
...
Closes #11413
GCS_MAVLink: conform to parameter protocol requirements while ignoring sets
GCS_MAVLink: use internal-use-only param bit
2019-08-22 09:23:56 +10:00
Peter Barker
03c439f9ab
GCS_MAVLink: make update_sensor_status_flags private
2019-08-17 17:45:03 +10:00
Peter Barker
74670a77be
GCS_MAVLink: avoid allocating a GCS_MAVLINK per mavlink channel
2019-08-14 18:25:43 +10:00
Peter Barker
4b012ab62b
GCS_MAVLink: deny upload of non-MISSION items if not doing mavlink2
2019-08-06 13:58:44 +10:00
Peter Barker
cf0b7cf016
GCS_MAVLink: pass link object in place of channel to compass cal
...
Also eliminate intermediate function as just adding noise
2019-08-05 09:23:10 +10:00
Peter Barker
880e96448b
GCS_MAVLink: tighten type on mavlink_coordinate_frame_to_location_alt_frame
2019-08-01 17:45:30 +10:00
Peter Barker
5e55aedd20
GCS_MAVLink: add printf-format attribute to send_text methods
2019-07-26 10:54:41 +10:00
Peter Barker
93ca243987
GCS_MAVLink: rearrange mission item handling code
...
This splits the missionitemprotocol handling entirely into separate
header files and separate compilation units.
2019-07-18 10:48:57 +09:00
Peter Barker
210c2070a1
GCS_MAVLink: remove include of AP_Param.h in GCS_MAVLink.h
...
This will help break include loops.
2019-07-17 18:05:29 +10:00
Pierre Kancir
b1506ca652
GCS_MAVLink: pass mavlink_message_t by const reference
2019-07-16 20:51:42 +10:00
Peter Barker
459680e7c8
GCS_MAVLink: make Avoidance responsible for sending collision message
2019-07-16 09:52:54 +10:00
Peter Barker
c0993509f7
GCS_MAVLink: declare GCS_MAVLINK as a class as it hasn't been defined yet
2019-07-16 09:29:48 +10:00
Peter Barker
6cb8fcc466
GCS_MAVLink: move use of AP_AHRS_NAVEKF_AVAILABLE into cpp file
...
This is defined in AP_AHRS which we only get transitively in the header
2019-07-09 22:32:57 +10:00
Peter Barker
1ebbe45fe1
GCS_MAVLink: split sending of RC_CHANNELS and RC_CHANNELS_RAW
...
Before this patch is applied we may never send the second message
because there's not room for it in the buffer and we can't return
failure-to-send (always interpreted as "retry") as we're in a void function.
Further, if you are on a mavlink2 connection we will not send out the
RC_CHANNELS_RAW message, depriving the user of any RC_CHANNELS messages.
This patch does have the drawback of doing more work on a mavlink1
connection - it has to fetch the data twice. On the other hand, it also
allows the GCS to set the message rates independently for both
RC_CHANNELS and RC_CHANNELS_RAW so one or the other can be squelched.
That could be handy for reducing bandwidth if you know you're not using
more than 8 input channels.
2019-07-09 13:08:45 +10:00
Michael du Breuil
f955a4e4d5
GCS_MAVLink: Don't retain a FrSky instance if we aren't using it
...
Saves 96 bytes of RAM
2019-06-26 11:59:41 +10:00
Peter Barker
feddaabc42
GCS_MAVLink: handle out-of-time to send messages in parent class
2019-06-25 10:29:40 +10:00
Andrew Tridgell
f28df4dff1
GCS_MAVLink: support MAV_CMD_BATTERY_RESET command
2019-06-25 09:56:25 +10:00
Peter Barker
a55c40949b
GCS_MAVLink: remove pointless protocol parameter to setup_uart
2019-06-25 09:47:08 +10:00
Peter Barker
ca449cd979
GCS_MAVLink: stop pointlessly passing serial manager around
2019-06-25 09:47:08 +10:00
Peter Barker
45fab82345
GCS_MAVLink: eliminate redundant static pointer to serialmanager
2019-06-25 09:47:08 +10:00
Michael du Breuil
8c00102259
GCS_MAVLink: Reduce scoping on AP_BattMonitor include
2019-06-18 10:02:05 +10:00
Peter Barker
a025794bae
GCS_MAVLink: correct is_streaming check and update of is-streaming mask
2019-06-11 09:26:10 +10:00
Peter Barker
264a757095
GCS_MAVLink: add send_to_active_channels method
2019-06-06 12:41:48 +10:00
Peter Barker
75ae6b59b0
GCS_MAVLink: allow Copter to disallow mavlink disarm
2019-05-30 07:37:30 +09:00
Peter Barker
1b90643751
GCS_MAVLink: report more internal errors in SYS_STATUS
2019-05-23 07:29:29 +10:00
Peter Barker
d0105c8fa7
GCS_MAVLink: factor mission handling, use for Rally
...
GCS_MAVLink: allow all mission types to be cleared
GCS_MAVLink: remove unused parameters from handle-mission-count
2019-05-22 08:53:45 +10:00
Peter Barker
a0c80a0b3b
GCS_MAVLink: make send_text and send_textv const
2019-05-01 10:18:46 +10:00
Peter Barker
c143ec47da
GCS_MAVLink: Bitmask is now a template
2019-04-16 15:12:07 +10:00
Randy Mackay
bbd051b246
GCS_MAVLink: send OPTICAL_FLOW messages to optical flow driver
2019-04-08 11:26:59 +09:00
Michael du Breuil
8cafbe394f
GCS_MAVLink: Fix includes
2019-04-05 20:12:53 +11:00
Rajat Singhal
b7a40f2bfe
GCS_Mavlink: Add function for sending POSITION_TARGET_LOCAL_NED message
2019-03-29 09:11:14 +11:00
Peter Barker
30a66d9f13
GCS_MAVLink: implement a convenience manual_override method
2019-03-27 22:33:47 -07:00
Randy Mackay
b496af411e
GCS_MAVLink: fix typo
2019-03-28 13:54:19 +09:00
Peter Barker
778bff966c
GCS_MAVLink: stop passing dataflash into handle_radio_status
...
It can use the singleton instead
2019-03-27 10:38:39 +11:00
Peter Barker
0ef26a6950
GCS_MAVLink: add support for request_message
2019-03-26 16:20:50 +11:00
Peter Barker
2796beac8d
GCS_MAVLink: move various sensor status flag updates up
2019-03-26 11:03:21 +11:00
Peter Barker
b3203601f3
GCS_MAVLink: send internal errors as bitmask in sys_status
2019-03-21 21:34:33 +11:00
Peter Barker
95745f0d31
GCS_MAVLink: move command-long DO_SET_HOME up
2019-03-19 19:56:13 +11:00
Peter Barker
bc2080cea2
GCS_MAVLink: move devo telemetry handling to GCS
2019-03-19 14:39:14 +11:00
Peter Barker
3100c8edad
GCS_MAVLink: GCS can report simple/supersimple input modes
2019-03-19 14:39:14 +11:00
Peter Barker
cf264a7d5e
GCS_MAVLink: move vehicle_initialised to be on GCS not GCS_MAVLink
2019-03-19 14:39:14 +11:00
Peter Barker
b12d20d86c
GCS_MAVLink: add support for frame_string
2019-03-19 14:39:14 +11:00
Peter Barker
ab1c42696c
GCS_MAVLink: move FRsky telemetry up into common GCS telemetry class
2019-03-19 14:39:14 +11:00
Michael du Breuil
75caad52c0
GCS_MAVLink: Always check the return value on get_velocity_NED
2019-03-19 11:42:54 +11:00
Peter Barker
4eba6d4fe2
GCS_MAVLink: exempt requested parameters from buffer space reservation
...
Fixes a problem where we reserve space to send replies but then do not
bypass the reserved-space checks when sending them.
2019-03-19 10:37:09 +11:00
Peter Barker
716b0fdc88
GCS_MAVLink: use enum class for AltFrame enumeration
2019-03-19 10:31:18 +11:00
Peter Barker
bb1ae30594
GCS_MAVLink: move sending of RPM message up
2019-03-16 10:33:01 +09:00
Randy Mackay
066a443e5f
GCS_MAVLink: add send_set_position_target_global_int
...
this supports sending the position target to an offboard navigation controller
2019-03-15 14:51:35 +09:00
Peter Barker
34e09a55be
GCS_MAVLink: support send_extended_sys_state
2019-03-12 09:16:13 +09:00
Peter Barker
74702b8688
GCS_MAVLink: make sending of send_pid_tuning up
2019-03-05 10:41:56 +11:00
IamPete1
20d79207d8
GCS_MAVLink: make send_global_position_int virtual
2019-03-01 20:57:54 +11:00
Peter Barker
ace5192852
GCS_MAVLink: retry sending home/origin if it fails
...
Also grants us the ability to stream these messages
2019-02-26 14:01:41 +11:00
Peter Barker
9f27e91f33
GCS_MAVLink: add simple stats to dataflash
2019-02-26 11:23:57 +11:00
Peter Barker
8de4ee7348
GCS_MAVLink: move update_sensor_status_flags into GCS subclasses
2019-02-19 14:09:59 +11:00
Peter Barker
cb33f290a7
GCS_MAVLink: move sensor flags to be a GCS thing rather than a GCS_MAVLINK thing
...
These are a per-vehicle thing, not a per-mavlink-backend thing.
2019-02-19 14:09:59 +11:00
Peter Barker
bfb3f0d62e
GCS_MAVLink: make capabilities comes from subclass, not HAL
2019-02-19 13:14:52 +11:00
Peter Barker
de615ee11d
GCS_MAVLink: move try_send_message of nav_controller_output up
2019-02-19 10:08:00 +11:00
Peter Barker
4a0887b807
GCS_MAVLink: measure stream slowdown in ms
...
This costs us a couple of extra bytes of RAM and gains us not doing a
whole heap of multiplies
2019-02-16 13:45:47 +11:00
Peter Barker
63427629e1
GCS_MAVLink: use visual odometry singleton
2019-02-15 16:56:13 +11:00