Andrew Tridgell
e3952112ad
Plane: raise default LIM_PITCH_MAX to 20 degrees
...
15 is often not enough to climb
2014-03-03 15:49:04 +11:00
Andrew Tridgell
6b9e1edf38
Plane: disable GPS2 in HIL
2014-02-27 08:16:28 +11:00
Andrew Tridgell
07826096a2
Plane: support a 2nd GPS
2014-02-26 09:24:23 +11:00
Andrew Tridgell
d9cb101a03
Plane: default LOG_BITMASK to 32767 on non-APM
2013-12-31 10:28:38 +11:00
Andrew Tridgell
ce773f085a
Plane: make the defaut for FS_GCS_ENABL clearer
2013-12-20 11:44:44 +11:00
Andrew Tridgell
8383abc1fe
Plane: added SERIAL2_BAUD and rename SERIAL3_BAUD to SERIAL1_BAUD
2013-11-26 13:00:03 +11:00
Andrew Tridgell
a05a32dbda
Plane: added RCIN and SRVO logging
2013-11-26 09:04:43 +11:00
Andrew Tridgell
7e10811673
Plane: send firmware and git version in tlog
2013-11-09 10:09:20 +11:00
Andrew Tridgell
5e1f5ffb7f
Plane: removed some old defines
2013-10-14 14:40:30 +11:00
Andrew Tridgell
e6af7dad3d
Plane: switched to L3G4200D driver for Linux
2013-10-08 11:50:54 +11:00
Randy Mackay
c64d444b5a
Plane: integrate BattMonitor
2013-10-03 11:16:08 +09:00
Andrew Tridgell
444d053dc2
Plane: enable Oilpan and BMP085 on Linux
2013-09-29 01:02:05 +10:00
Andrew Tridgell
287db19119
Plane: updates for Stub -> HIL
2013-09-28 22:04:15 +10:00
Andrew Tridgell
c3d0b315cf
Plane: added HAL_LINUX includes
2013-09-28 21:24:02 +10:00
Mike McCauley
18c6b00b5b
Plane: Added definitions for Flymaple
2013-09-24 13:51:28 +10:00
Andrew Tridgell
21a4da0d29
Plane: removed flash_leds() calls
2013-09-19 18:38:28 +10:00
Andrew Tridgell
4bd6b2f428
Plane: use new usb_connected() function
2013-09-19 16:23:58 +10:00
Andrew Tridgell
b16e3e4c85
Plane: changed FBW min to 9 m/s
...
6 m/s is too dangerous for widely used planes
2013-08-18 11:42:23 +10:00
Andrew Tridgell
5cfdf52381
Plane: change default modes to FBWA not STABILIZE
2013-08-13 13:42:27 +10:00
Andrew Tridgell
c083c15240
Plane: use a larger serial buffer
...
this makes higher rate MAVLink possible again
2013-08-02 18:46:54 +10:00
Andrew Tridgell
b8fa83ff54
Plane: change default slewrate to 100%/second
2013-07-22 12:50:02 +10:00
Andrew Tridgell
c8a83e17d0
Plane: remove old AIR_START code
...
this was never used or tested
2013-07-22 12:50:01 +10:00
Andrew Tridgell
4087fde140
Plane: enable CTUN log message by default
2013-07-14 21:10:12 +10:00
Andrew Tridgell
3c177867a4
Plane: allow enable/disable of camera log messages in CLI
2013-07-10 12:23:36 +10:00
Paul Riseborough
d62636d309
Plane: added new TECS altitude controller
...
Includes improvements to takeoff/launch detect logic to support hand
launching for X-8 flight
2013-07-04 16:56:57 +10:00
Andrew Tridgell
f7697574db
Plane: use the new airspeed driver interface
...
the choice of analog source is now in the airspeed driver
2013-06-03 11:51:09 +10:00
Andrew Tridgell
dd633fcf3f
Plane: make voltage and battery capacity failsafe settable at runtime
...
this also fixes issue #292
2013-05-22 20:33:57 +10:00
Andrew Tridgell
001d18b51d
Plane: removed scaling of pitot source
2013-05-13 15:19:05 +10:00
Andrew Tridgell
9c6f80c42b
Plane: moved some default values to Parameters.pde
2013-05-05 21:51:09 +10:00
Andrew Tridgell
4e2b88f6e6
Plane: added ATT_CONTROLLER option to select attitude controller
...
set to 1 for the new APM_Control library
2013-05-05 21:51:09 +10:00
Andrew Tridgell
0d97f417ec
Plane: enable compass on all boards by default
...
if not present, then mag init will fail and it will disable
2013-05-02 15:01:33 +10:00
Andrew Tridgell
a019e3740e
Plane: updates for new compass API
2013-05-02 12:48:14 +10:00
Andrew Tridgell
de3fcbc413
Plane: removed the MANUAL_LEVEL option
...
levelling on every startup is far too error prone. This was just
another parameter that everyone changed.
2013-04-29 14:19:53 +10:00
Bill Bonney
3ec891265f
Plane: Enable CURRENT logging by default onto Dataflash
2013-04-21 07:24:02 +10:00
Andrew Tridgell
0c5b393919
Plane: added compass logging
2013-04-20 13:52:36 +10:00
Andrew Tridgell
11eb0cfce1
Plane: update for new AP_Navigation controller class
...
this switches ArduPlane over to use the L1 navigation controller, via
a generic nav_controller object pointer.
Note that the nav_controller controls all types of navigation now,
including level flight and heading hold. This provides a cleaner
abstraction than the old method of special case navigation handling
Pair-Programmed-With: Paul Riseborough <p_riseborough@live.com.au>
2013-04-12 12:48:09 +10:00
Andrew Tridgell
dfb14d760b
Plane: added HIL_SERVOS option
...
this allows for real servo output in HIL
2013-03-30 14:38:43 +11:00
Andrew Tridgell
c989099665
Plane: enable PX4IO dual telemetry devices
2013-02-18 13:56:21 +11:00
Brandon Jones
fa7839941f
After Plane: cleanup driver declaration 4d9a74d
, HIL_MODE_ATTITUDE with MAG_ENABLE=1 set results in continuous reboot/APM crash. Added define for AP_COMPASS_HIL when HIL_MODE_ATTITUDE is enabled.
2013-02-05 09:04:34 +11:00
Randy Mackay
7297a1ff83
Plane: renamed RAW dataflash message to IMU
2013-01-26 17:29:29 +09:00
Randy Mackay
e674626fd6
Plane: rename CUR and CURR to CURRENT for logging
...
Based on user complaint that log was enabled/disabled using CUR while
message that appeared in log was CURR.
2013-01-26 17:19:42 +09:00
Andrew Tridgell
4d9a74d742
Plane: cleanup driver declaration
...
remove a lot of the #if nesting
2013-01-21 16:08:55 +11:00
Andrew Tridgell
4deee014d6
Plane: setup PX4 airspeed analog port
2013-01-21 13:56:28 +11:00
Andrew Tridgell
2e04d4827a
Plane: run PX4 console at 57600
2013-01-20 22:13:21 +11:00
Andrew Tridgell
f9cb9e08ae
Plane: fixed orientation of PX4 compass
2013-01-17 17:23:34 +11:00
James Bielman
ab37f833db
MS5611: Fix CONFIG_MS5611_SERIAL definitions.
...
- Make sure the values are defined as integers. We were always using
SPI rather than using I2C when desired.
2013-01-09 11:19:51 -08:00
Andrew Tridgell
38f56be2c4
Plane: enable hardware sensors on PX4
2013-01-04 21:07:56 +11:00
Andrew Tridgell
9e0096ddb5
Plane: fix handling of sensors HIL startup
2013-01-04 12:34:35 +11:00
James Bielman
264db3670e
AP_Baro: Add CONFIG_MS5611_SERIAL option to choose between SPI and I2C.
...
- Update ArduCopter and ArduPlane modules to pass the correct serial
driver to the MS5611 driver.
- Update barometer examples, assuming SPI.
2013-01-03 13:48:06 -08:00
Andrew Tridgell
868269e037
Plane: switch PX4 to attitude HIL for now
...
a bit easier to debug
2013-01-03 13:38:54 +11:00