Commit Graph

521 Commits

Author SHA1 Message Date
Jonathan Challinger 9a025024b5 Copter: use LowPassFilterVector3f for land detector accel filter 2015-04-17 10:46:56 +09:00
Jonathan Challinger eafbd94d51 Copter: run land detector at 400hz 2015-04-17 10:46:53 +09:00
Leonard Hall 2bf8f21b7a Copter: roll, pitch rate IMAX to 2000 2015-04-09 20:19:56 +09:00
Randy Mackay e1900f646f Copter: remove PREARM_MAX_VELOCITY definition 2015-03-30 18:08:34 -07:00
Randy Mackay 74b98b89d0 Copter: remove dcm check 2015-03-27 00:04:37 -07:00
Andrew Tridgell a4be1fede8 Copter: run all boards at 400Hz
SITL and Linux can now run at 400Hz
2015-03-22 18:57:43 -07:00
Randy Mackay 522ef8f91f Copter: rename MOT df msg to MOTB
This will slightly reduce confusion with the MOT message from AC3.1.5
that eventually became RCOUT
2015-03-18 21:25:45 +09:00
Randy Mackay b679fd0be0 Copter: log RATE with ATT 2015-03-18 21:25:42 +09:00
Randy Mackay 20311c3ba2 Copter: remove CH7_OPTION definition
We can replace the unused definitions and just set the aux switch
defaults to do-nothing directly in the parameter table
2015-03-17 21:18:50 +09:00
Robert Lefebvre 97cd3614eb Copter: Change Aux Switch function list to enum. 2015-03-17 21:18:46 +09:00
Robert Lefebvre a5af151a91 Copter: Initial expansion of Aux Switch to Ch7-12 2015-03-17 21:18:41 +09:00
Randy Mackay b10730f35c Copter: remove THR_MAX parameter 2015-03-16 14:49:34 +09:00
Víctor Mayoral Vilches 79e152cd93 Copter: Update compass to the new interface 2015-03-13 18:46:16 +11:00
Randy Mackay 088a49abbf Copter: remove APM1, APM2 support 2015-03-13 16:41:03 +09:00
Randy Mackay fbfc94cf69 Copter: remove GPS glitch and failsafe
The EKF failsafe now captures all failures that could lead to a bad
position including GPS glitches and a bad compass meaning we do not need
this protection in the main flight code.
2015-03-13 16:40:46 +09:00
Leonard Hall 778edfda72 Copter: default yaw rate filter to 5hz 2015-03-06 16:08:32 +09:00
Leonard Hall d5bbe6de03 Copter: remove TRIM_THROTTLE
throttle_trim is replaced by throttle_average which is initialised to
the throttle_mid parameter value at startup
2015-03-06 14:02:19 +09:00
Leonard Hall c78480e14f Copter: rename loiter_pos to pos_xy
Also renamed throttle_rate to vel_z, throttle_accel to accel_z
2015-03-06 14:02:17 +09:00
Leonard Hall e232867661 Copter: move LOITER_RATE to 2-axis PI controller
Also rename LOITER_RATE to VEL_XY for parameters, definitions, variables
2015-03-06 14:02:15 +09:00
Leonard Hall 2b0fb45fe8 Copter: integrate PID input filter 2015-03-06 14:02:11 +09:00
Leonard Hall 8ba195a3a2 Copter: add Mot and Rate dataflash logging 2015-03-06 14:02:07 +09:00
Randy Mackay e081b9d1c7 Copter: home is set becomes three state 2015-02-12 15:00:50 +09:00
Randy Mackay 3aac281c5a Copter: land detector requires desired climb rate be < -20cm/s 2015-01-31 17:23:43 +09:00
Randy Mackay 34503de18e Copter: integrate SerialManager
Remove serial0, serial1 baud and protocol parameters
Pass serial_manager to GCS, GPS, mount, FrSky_telem objects during init
call SerialManager init_console on startup
use SerialManager's set_block_writes_all
2015-01-29 14:05:14 +11:00
Randy Mackay 18f8ffab6f Copter: remove land detector bar climb rate definition 2015-01-28 10:59:15 +09:00
Randy Mackay 0065b3b224 Copter: tighten accel and gyro pre-arm consistency check
Accel diff threshold to 0.7m/s/s (was 1.0 m/s/s)
Gyro diff threshold to 5deg/sec (was 20deg/sec)
2015-01-20 12:44:02 +09:00
Andrew Tridgell ab62105afe Copter: use common send_opticalflow() 2015-01-03 15:53:49 +11:00
Andrew Tridgell c784ee717b Copter: update for new OptFlow API 2015-01-03 14:16:33 +11:00
Randy Mackay 2e7435df52 Copter: remove unused OF_LOITER pid defines 2014-12-31 13:16:18 +09:00
Randy Mackay f2b0fc3566 Copter: disarm on landing regardless of pilot input 2014-12-27 13:33:06 +09:00
Randy Mackay b6bcf841e1 Copter: remove second camera mount 2014-12-16 21:26:20 +09:00
Randy Mackay fd55a2d9c4 Copter: increase GPS_HDOP_GOOD default to 2.3 2014-12-15 10:45:50 +09:00
Randy Mackay 3127dd94c1 Copter: add OPTFLOW to default logging 2014-12-08 14:58:27 +09:00
priseborough 267ef48026 Copter : disable tilt correction of range finder data for use by EKF
This is a temporary fix. We need to make separate range and altitude measurements available.
2014-12-06 18:16:45 +11:00
Andrew Tridgell 4c0351a76a Copter: convert to new AP_InertialSensor API 2014-10-24 12:10:38 +11:00
Randy Mackay f6ff1742d5 Copter: landing detector checks baro climb rate
Barometer climb rate must be -150cm/s ~ +150cm/s
This threshold is generous because we already use the inertial
navigation climb rate so this is just to catch cases where inertial nav
is very incorrect in it's climbrate estimates
2014-10-22 17:29:14 +09:00
Jonathan Challinger 5fc02bdbc4 Copter: Reduce prearm alt disparity check back to 1m 2014-10-20 10:55:59 +09:00
Randy Mackay 27b73fa209 Copter: enable Optflow by default for Pixhawk only 2014-10-16 21:17:54 +09:00
Randy Mackay b0e6931ab0 Copter: add DCM_CHECK_THRESH parameter 2014-10-16 17:22:11 +09:00
Randy Mackay 4e06970a1c Copter: disable OptFlow in SITL 2014-10-15 20:46:06 +09:00
Randy Mackay 67b7b2d667 Copter: enable optflow by default for Pixhawk 2014-10-15 16:36:31 +09:00
Randy Mackay 8997c224e2 Copter: enable Guided velocity controller for Pixhawk 2014-10-13 21:40:20 +09:00
Randy Mackay 2f3f1a1d5e Copter: Rate Pitch IMAX default to 1000
Spotted by Jonathan Challinger, thanks!
2014-10-07 21:06:43 +09:00
Jonathan Challinger 73e1719ee1 Copter: print frame type in log headers 2014-09-27 16:11:21 +09:00
Randy Mackay 193bc5331a Copter: cleanup enabling of cli and frsky telem for APM 2014-09-20 14:41:26 +09:00
Randy Mackay d8d1b38a52 Copter: increase Alt Disparity check to 2m 2014-09-20 12:24:36 +09:00
Randy Mackay 6951a20fb0 Copter: soften loiter target when maybe landed
Applies to auto's land, land, loiter, pos hold and rtl flight modes
2014-09-19 16:43:12 +09:00
Randy Mackay b552479e31 Copter: typo fix for baro vs inav alt disparity definition 2014-09-18 17:32:03 +09:00
Randy Mackay 18e3db0011 Copter: define limit for baro vs inav alt disparity 2014-09-18 17:24:40 +09:00
Randy Mackay adf00a207b Copter: enable EPM by default on Pixhawk 2014-09-17 21:14:22 +09:00