.. |
templates
|
fix micrortps_transport: set poll fd when baudrate is 0
|
2021-08-22 10:42:13 -04:00 |
tools
|
add sensor_combined to urtps_bridge_topics.yaml
|
2021-08-18 23:52:45 +01:00 |
CMakeLists.txt
|
msg: purge unused qshell
|
2021-08-14 12:54:01 -04:00 |
actuator_armed.msg
|
Mavlink FLIGHT_INFORMATION fix arming time (ms -> us) and add takeoff time
|
2020-12-16 09:38:05 -05:00 |
actuator_controls.msg
|
initial control allocation support
|
2021-01-18 11:25:37 -05:00 |
actuator_outputs.msg
|
beautify some identation
|
2018-08-09 13:40:48 +02:00 |
adc_report.msg
|
ADC: replace ioctl with uorb message (#14087)
|
2020-03-20 11:23:32 +01:00 |
airspeed.msg
|
beautify some identation
|
2018-08-09 13:40:48 +02:00 |
airspeed_validated.msg
|
Commenting and formating fixes
|
2020-10-06 09:31:58 +02:00 |
airspeed_wind.msg
|
select single system-wide wind estimate message (current best)
|
2021-02-20 13:15:01 -05:00 |
battery_status.msg
|
battery: publish measured values also when battery not connected
|
2021-07-01 14:24:38 +02:00 |
camera_capture.msg
|
add timestamp field to uORB msgs; sync timestamp whenever possible
|
2018-08-09 13:40:48 +02:00 |
camera_status.msg
|
mavlink: use dynamic camera comp id instead of hardcoded value
|
2021-07-31 12:41:49 -04:00 |
camera_trigger.msg
|
camera_capture: change topic namings to make logging, mavlink streaming and geotagging easier
|
2019-02-10 18:07:44 -05:00 |
cellular_status.msg
|
Update mavlink with cellular status message fixes
|
2020-07-09 15:12:02 -04:00 |
collision_constraints.msg
|
first push on supporting ROS2 Dashing and IDL 4.2
|
2019-10-04 16:56:03 +01:00 |
collision_report.msg
|
add timestamp field to uORB msgs; sync timestamp whenever possible
|
2018-08-09 13:40:48 +02:00 |
commander_state.msg
|
state_machine_helper: automatically initialize to assist mode if using mavlink manual control
|
2021-03-30 17:56:28 +02:00 |
control_allocator_status.msg
|
fix control_allocator_status: torque_setpoint_achieved and thrust_setpoint_achieved are bool
|
2021-01-18 11:25:37 -05:00 |
cpuload.msg
|
add timestamp field to uORB msgs; sync timestamp whenever possible
|
2018-08-09 13:40:48 +02:00 |
debug_array.msg
|
Add support for mavlink message DEBUG_FLOAT_ARRAY
|
2018-09-27 12:33:12 -04:00 |
debug_key_value.msg
|
add timestamp field to uORB msgs; sync timestamp whenever possible
|
2018-08-09 13:40:48 +02:00 |
debug_value.msg
|
add timestamp field to uORB msgs; sync timestamp whenever possible
|
2018-08-09 13:40:48 +02:00 |
debug_vect.msg
|
add timestamp field to uORB msgs; sync timestamp whenever possible
|
2018-08-09 13:40:48 +02:00 |
differential_pressure.msg
|
add timestamp field to uORB msgs; sync timestamp whenever possible
|
2018-08-09 13:40:48 +02:00 |
distance_sensor.msg
|
Drivers: Distance Sensors: Add proper device IDs
|
2021-01-27 17:02:20 -05:00 |
ekf2_timestamps.msg
|
ekf2_timestamps.msg - make first line a complete sentence
|
2021-08-16 08:29:44 +02:00 |
ekf_gps_drift.msg
|
msg: Create message for GPS drift rates
|
2018-08-17 10:44:07 +10:00 |
esc_report.msg
|
msg: extend field definition in msg/esc_report (arming & failure states)
|
2020-04-03 09:16:43 +02:00 |
esc_status.msg
|
msg: extend field definition in msg/esc_report (arming & failure states)
|
2020-04-03 09:16:43 +02:00 |
estimator_baro_bias.msg
|
ekf2: baro bias publish minor cleanup
|
2021-08-02 13:59:38 -04:00 |
estimator_event_flags.msg
|
commander: report GNSS yaw fault to user
|
2021-08-05 11:10:02 +02:00 |
estimator_innovations.msg
|
estimator_innovations: remove unimplemented fake vel & pos fields
|
2020-11-11 20:17:52 -05:00 |
estimator_optical_flow_vel.msg
|
OpticalFlow: add optical flow velocity logging
|
2020-10-26 14:10:25 -04:00 |
estimator_selector_status.msg
|
Multi-EKF support (ekf2)
|
2020-10-27 10:56:11 -04:00 |
estimator_sensor_bias.msg
|
estimated IMU bias preflight checks
|
2021-01-12 09:09:42 +01:00 |
estimator_states.msg
|
estimator messages add explicit timestamp_sample
|
2020-09-04 10:48:26 -04:00 |
estimator_status.msg
|
commander: report GNSS yaw fault to user
|
2021-08-05 11:10:02 +02:00 |
estimator_status_flags.msg
|
commander: report GNSS yaw fault to user
|
2021-08-05 11:10:02 +02:00 |
event.msg
|
events interface: chance uORB 'sequence' to 'event_sequence'
|
2021-07-09 13:24:13 +02:00 |
follow_target.msg
|
add timestamp field to uORB msgs; sync timestamp whenever possible
|
2018-08-09 13:40:48 +02:00 |
generator_status.msg
|
mavlink: handle receiving GENERATOR_STATUS
|
2020-09-25 11:36:58 -04:00 |
geofence_result.msg
|
Add Land as Geofence Action
|
2020-07-09 10:32:10 -04:00 |
gimbal_device_attitude_status.msg
|
Support for gimbal v2 protocol
|
2021-02-17 13:54:34 -05:00 |
gimbal_device_information.msg
|
vmount/mavlink: update gimbal information message
|
2021-02-17 13:54:34 -05:00 |
gimbal_device_set_attitude.msg
|
Support for gimbal v2 protocol
|
2021-02-17 13:54:34 -05:00 |
gimbal_manager_information.msg
|
vmount/mavlink: update gimbal information message
|
2021-02-17 13:54:34 -05:00 |
gimbal_manager_set_attitude.msg
|
vmount/navigator/mavlink: gimbal v2 changes
|
2021-02-17 13:54:34 -05:00 |
gimbal_manager_set_manual_control.msg
|
vmount/navigator/mavlink: gimbal v2 changes
|
2021-02-17 13:54:34 -05:00 |
gimbal_manager_status.msg
|
vmount/navigator/mavlink: gimbal v2 changes
|
2021-02-17 13:54:34 -05:00 |
gps_dump.msg
|
GPS_DUMP_COMM: dump all gps instances
|
2020-12-08 11:45:24 +01:00 |
gps_inject_data.msg
|
fix: uORB topics lost messages when publications overflow
|
2020-10-19 08:52:55 +02:00 |
heater_status.msg
|
Create publish_status() method in the heater driver, add a status field to indicate if the temperature setpoint has been met within 2.5C, breakout update_params() method from the Heater::Run() method and simplify logic.
|
2021-04-16 08:09:51 -04:00 |
home_position.msg
|
Commander: set home position in air
|
2020-12-07 10:24:23 -05:00 |
hover_thrust_estimate.msg
|
mc_hover_thrust_estimator: validity flag and other small improvements/fixes
|
2020-08-03 10:30:52 -04:00 |
input_rc.msg
|
Ghost protocol
|
2021-02-20 11:29:57 +01:00 |
internal_combustion_engine_status.msg
|
Add internal combustion engine status uavcan bridge and mavlink EFI_STATUS stream
|
2021-07-30 22:31:43 -04:00 |
iridiumsbd_status.msg
|
add timestamp field to uORB msgs; sync timestamp whenever possible
|
2018-08-09 13:40:48 +02:00 |
irlock_report.msg
|
add timestamp field to uORB msgs; sync timestamp whenever possible
|
2018-08-09 13:40:48 +02:00 |
landing_gear.msg
|
vehicle constraints: remove landing gear
|
2018-12-10 16:17:23 +01:00 |
landing_target_innovations.msg
|
add timestamp field to uORB msgs; sync timestamp whenever possible
|
2018-08-09 13:40:48 +02:00 |
landing_target_pose.msg
|
add timestamp field to uORB msgs; sync timestamp whenever possible
|
2018-08-09 13:40:48 +02:00 |
led_control.msg
|
msg:led_control Extend to support 8 LEDS
|
2021-01-23 09:30:59 -05:00 |
log_message.msg
|
log_message increase queue depth 2->4
|
2021-01-09 11:04:32 -05:00 |
logger_status.msg
|
logger: record message gaps
|
2020-07-29 13:36:22 -04:00 |
mag_worker_data.msg
|
Add logging of mag calibration data (mag_worker_data)
|
2021-01-20 09:44:45 -05:00 |
manual_control_setpoint.msg
|
new manual_control_switches msg (split out of manual_control_setpoint) (#16270)
|
2020-12-11 12:11:35 -05:00 |
manual_control_switches.msg
|
delete RATTITUDE flight mode
|
2021-03-09 10:47:00 -05:00 |
mavlink_log.msg
|
mavlink: STATUSTEXT directly use mavlink_log subscription
|
2020-11-17 19:47:06 -05:00 |
mission.msg
|
beautify some identation
|
2018-08-09 13:40:48 +02:00 |
mission_result.msg
|
beautify some identation
|
2018-08-09 13:40:48 +02:00 |
mount_orientation.msg
|
beautify some identation
|
2018-08-09 13:40:48 +02:00 |
multirotor_motor_limits.msg
|
add timestamp field to uORB msgs; sync timestamp whenever possible
|
2018-08-09 13:40:48 +02:00 |
navigator_mission_item.msg
|
navigator: publish navigator mission item changes for logging
|
2020-10-13 12:12:03 -04:00 |
obstacle_distance.msg
|
Collision Prevention: support multiple sensors and frames (#12883)
|
2019-09-06 08:38:56 +02:00 |
offboard_control_mode.msg
|
OFFBOARD mode architecture overhaul (#16739)
|
2021-03-05 09:39:46 -05:00 |
onboard_computer_status.msg
|
Add units on message comments
|
2019-10-27 11:47:10 +00:00 |
optical_flow.msg
|
paw3902: fixes and improvements
|
2021-03-16 15:52:03 -04:00 |
orb_test.msg
|
uORB: add bitset for faster orb_exists check and remove uORB::Subscription lazy subscribe hack/optimization
|
2020-03-11 09:06:33 -04:00 |
orb_test_large.msg
|
uORB: add bitset for faster orb_exists check and remove uORB::Subscription lazy subscribe hack/optimization
|
2020-03-11 09:06:33 -04:00 |
orb_test_medium.msg
|
fix: uORB topics lost messages when publications overflow
|
2020-10-19 08:52:55 +02:00 |
orbit_status.msg
|
Orbit: Add RC controlled yaw mode
|
2020-07-13 20:26:13 +02:00 |
parameter_update.msg
|
parameter_update.msg: add basic status info
|
2021-02-12 08:27:47 -05:00 |
ping.msg
|
add timestamp field to uORB msgs; sync timestamp whenever possible
|
2018-08-09 13:40:48 +02:00 |
position_controller_landing_status.msg
|
generic position controller status/feedback message
|
2018-08-31 14:43:51 -04:00 |
position_controller_status.msg
|
position_controller_status message: added comments regarding NAN
|
2021-03-31 11:23:33 +02:00 |
position_setpoint.msg
|
update UUV and rover controllers to use trajectory_setpoint and cleanup unused position_setpoint fields
|
2021-03-09 10:36:34 -05:00 |
position_setpoint_triplet.msg
|
add timestamp field to uORB msgs; sync timestamp whenever possible
|
2018-08-09 13:40:48 +02:00 |
power_button_state.msg
|
add timestamp field to uORB msgs; sync timestamp whenever possible
|
2018-08-09 13:40:48 +02:00 |
power_monitor.msg
|
Added TI ina226 I2C power monitor (#11755)
|
2019-05-17 13:33:48 -04:00 |
pwm_input.msg
|
PWM automatic trigger system (ATS) for parachutes (#13726)
|
2020-01-06 20:14:06 -05:00 |
px4io_status.msg
|
px4io: servorail_status -> px4io_status and log all flags
|
2020-07-21 09:56:13 -04:00 |
radio_status.msg
|
radio_status: change 'fixed' field name to 'fix' so it does not clash with 'fixed' floating-point notation on the IDL generation
|
2018-10-08 10:58:45 +02:00 |
rate_ctrl_status.msg
|
sensors: create vehicle_angular_velocity module (#12596)
|
2019-08-06 12:55:25 -04:00 |
rc_channels.msg
|
delete RATTITUDE flight mode
|
2021-03-09 10:47:00 -05:00 |
rc_parameter_map.msg
|
add timestamp field to uORB msgs; sync timestamp whenever possible
|
2018-08-09 13:40:48 +02:00 |
rpm.msg
|
Remove duplicite data from RPM message and enable logging of RPM message
|
2020-03-30 13:08:53 -04:00 |
rtl_flight_time.msg
|
Test the vehicle type parameter usage
|
2021-01-18 16:26:53 +01:00 |
safety.msg
|
add timestamp field to uORB msgs; sync timestamp whenever possible
|
2018-08-09 13:40:48 +02:00 |
satellite_info.msg
|
Add MavlinkStreamGPSStatus status class stream via GPS_STATUS.hpp and add PRN code to satellite_info.msg.
|
2020-10-14 08:26:42 +02:00 |
sensor_accel.msg
|
sensors/vehicle_imu: vehicle_imu_status include accel/gyro full raw FIFO sample rate
|
2021-02-24 08:13:53 -05:00 |
sensor_accel_fifo.msg
|
rotate accel/gyro FIFO before publish and fix angular velocity filter resets
|
2021-03-22 12:01:12 -04:00 |
sensor_baro.msg
|
Clarification of coordinate systems for sensors_* and vehicle_* messages (#16339)
|
2020-12-15 09:18:05 +01:00 |
sensor_combined.msg
|
Clarification of coordinate systems for sensors_* and vehicle_* messages (#16339)
|
2020-12-15 09:18:05 +01:00 |
sensor_correction.msg
|
sensor calibration: save temperature at calibration time for monitoring
|
2021-08-15 11:19:24 -04:00 |
sensor_gps.msg
|
gps add device_id
|
2021-04-08 08:27:07 +02:00 |
sensor_gyro.msg
|
sensors/vehicle_imu: vehicle_imu_status include accel/gyro full raw FIFO sample rate
|
2021-02-24 08:13:53 -05:00 |
sensor_gyro_fft.msg
|
gyro_fft: change default length 1024 -> 512 to decrease latency
|
2021-07-06 21:54:18 -04:00 |
sensor_gyro_fifo.msg
|
rotate accel/gyro FIFO before publish and fix angular velocity filter resets
|
2021-03-22 12:01:12 -04:00 |
sensor_mag.msg
|
Clarification of coordinate systems for sensors_* and vehicle_* messages (#16339)
|
2020-12-15 09:18:05 +01:00 |
sensor_preflight_mag.msg
|
sensors: move mag aggregation to new VehicleMagnetometer WorkItem
|
2020-08-21 10:12:13 -04:00 |
sensor_selection.msg
|
sensors: move mag aggregation to new VehicleMagnetometer WorkItem
|
2020-08-21 10:12:13 -04:00 |
sensors_status_imu.msg
|
sensors: add accel/gyro current priority to sensors_status_imu
|
2021-07-30 21:20:01 -04:00 |
system_power.msg
|
adc: add support for multiple sensor voltage channels
|
2021-01-15 10:57:20 -05:00 |
takeoff_status.msg
|
MulticopterPositionControl: publish stricter tilt limit during takeoff
|
2021-04-20 18:18:21 +02:00 |
task_stack_info.msg
|
load_mon: update orb_publish to uORB::Publication<>
|
2019-09-02 20:41:34 -04:00 |
tecs_status.msg
|
log raw airspeed derivative, pitch setpoint and airspeed innovation for TECS
|
2021-05-31 23:56:23 +02:00 |
telemetry_status.msg
|
mavlink: keep track of seq for any component
|
2021-05-02 13:45:39 -04:00 |
test_motor.msg
|
commander: add support for DO_MOTOR_TEST
|
2019-10-24 09:27:29 +02:00 |
timesync.msg
|
timesync: remove system ID field from the timesync message
|
2021-08-12 08:44:53 +02:00 |
timesync_status.msg
|
microRTPS: agent: publish timesync status
|
2021-08-12 08:44:53 +02:00 |
trajectory_bezier.msg
|
Add documenation to uORB message
|
2020-03-09 09:51:49 +01:00 |
trajectory_waypoint.msg
|
add point type (mavlink command associated with wp) in Obstacle Avoidance interface
|
2019-08-05 16:05:40 +02:00 |
transponder_report.msg
|
fix: uORB topics lost messages when publications overflow
|
2020-10-19 08:52:55 +02:00 |
tune_control.msg
|
fix: uORB topics lost messages when publications overflow
|
2020-10-19 08:52:55 +02:00 |
uavcan_parameter_request.msg
|
fix: uORB topics lost messages when publications overflow
|
2020-10-19 08:52:55 +02:00 |
uavcan_parameter_value.msg
|
add timestamp field to uORB msgs; sync timestamp whenever possible
|
2018-08-09 13:40:48 +02:00 |
ulog_stream.msg
|
fix: uORB topics lost messages when publications overflow
|
2020-10-19 08:52:55 +02:00 |
ulog_stream_ack.msg
|
ulog stream msgs: rename 'sequence' fields as they are protected names in fastrtpsgen
|
2019-10-14 16:37:17 +01:00 |
vehicle_acceleration.msg
|
Clarification of coordinate systems for sensors_* and vehicle_* messages (#16339)
|
2020-12-15 09:18:05 +01:00 |
vehicle_actuator_setpoint.msg
|
initial control allocation support
|
2021-01-18 11:25:37 -05:00 |
vehicle_air_data.msg
|
Clarification of coordinate systems for sensors_* and vehicle_* messages (#16339)
|
2020-12-15 09:18:05 +01:00 |
vehicle_angular_acceleration.msg
|
Clarification of coordinate systems for sensors_* and vehicle_* messages (#16339)
|
2020-12-15 09:18:05 +01:00 |
vehicle_angular_acceleration_setpoint.msg
|
initial control allocation support
|
2021-01-18 11:25:37 -05:00 |
vehicle_angular_velocity.msg
|
Clarification of coordinate systems for sensors_* and vehicle_* messages (#16339)
|
2020-12-15 09:18:05 +01:00 |
vehicle_attitude.msg
|
Clarification of coordinate systems for sensors_* and vehicle_* messages (#16339)
|
2020-12-15 09:18:05 +01:00 |
vehicle_attitude_setpoint.msg
|
vehicle_attitude_setpoint: get rid of unused q_d_valid flag
|
2020-02-27 09:17:52 +01:00 |
vehicle_command.msg
|
commander: send parachute command on termination (#17564)
|
2021-06-15 11:50:30 +02:00 |
vehicle_command_ack.msg
|
ekf2 support SET_GPS_GLOBAL_ORIGIN and remove globallocalconverter usage
|
2021-03-05 18:25:14 -05:00 |
vehicle_constraints.msg
|
move takeoff state machine flight_mode_manager -> mc_pos_control
|
2021-03-03 18:53:56 +01:00 |
vehicle_control_mode.msg
|
en-/disable mc position controller using explicit control mode flag
|
2021-06-09 18:10:22 +02:00 |
vehicle_global_position.msg
|
Multi-EKF support (ekf2)
|
2020-10-27 10:56:11 -04:00 |
vehicle_gps_position.msg
|
vehicle_gps_position: add jamming_state
|
2021-01-30 11:26:42 +01:00 |
vehicle_imu.msg
|
Clarification of coordinate systems for sensors_* and vehicle_* messages (#16339)
|
2020-12-15 09:18:05 +01:00 |
vehicle_imu_status.msg
|
sensors/vehicle_imu: vehicle_imu_status include accel/gyro full raw FIFO sample rate
|
2021-02-24 08:13:53 -05:00 |
vehicle_land_detected.msg
|
land detector: log more states in order to facilitate debugging ground contact state
|
2021-05-04 16:43:33 +02:00 |
vehicle_local_position.msg
|
vehicle_local_position: added bitfield for terrain estimate sensor info
|
2021-01-17 12:06:59 +01:00 |
vehicle_local_position_setpoint.msg
|
vehicle_local_position_setpoint: make acceleration and jerk arrays
|
2019-10-24 14:58:57 +02:00 |
vehicle_magnetometer.msg
|
Clarification of coordinate systems for sensors_* and vehicle_* messages (#16339)
|
2020-12-15 09:18:05 +01:00 |
vehicle_odometry.msg
|
rename vehicle_visual_odometry_aligned -> estimator_visual_odometry_aligned
|
2020-10-27 12:33:39 -04:00 |
vehicle_rates_setpoint.msg
|
VTOL rate control architecture improvements (#10819)
|
2018-11-21 20:32:40 -05:00 |
vehicle_roi.msg
|
beautify some identation
|
2018-08-09 13:40:48 +02:00 |
vehicle_status.msg
|
vehicle_status: added field for geofence violation
|
2021-05-10 10:46:49 +03:00 |
vehicle_status_flags.msg
|
Commander/preflight checks: Add monitoring to ESC failures
|
2021-04-22 13:46:08 +02:00 |
vehicle_thrust_setpoint.msg
|
initial control allocation support
|
2021-01-18 11:25:37 -05:00 |
vehicle_torque_setpoint.msg
|
initial control allocation support
|
2021-01-18 11:25:37 -05:00 |
vehicle_trajectory_bezier.msg
|
Add uORB messages for bezier curve trajectories
|
2020-03-09 09:51:49 +01:00 |
vehicle_trajectory_waypoint.msg
|
TRAJECTORY message renamed
|
2018-11-13 12:13:01 -05:00 |
vtol_vehicle_status.msg
|
update Quadchute trigger from mavlink PR 1569
|
2021-05-03 21:44:27 +03:00 |
wheel_encoders.msg
|
Changed wheel encoder publication to multi-instance
|
2019-08-05 02:45:33 -07:00 |
wind.msg
|
select single system-wide wind estimate message (current best)
|
2021-02-20 13:15:01 -05:00 |
yaw_estimator_status.msg
|
estimator messages add explicit timestamp_sample
|
2020-09-04 10:48:26 -04:00 |