dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity
43,593 Commits 514 Branches 136 Tags 601 MiB
Commit Graph

65 Commits

Author SHA1 Message Date
David Sidrane 543454f12e stm32h7:ADC STM32_RCC_D3CCIPR_ADCSEL->STM32_RCC_D3CCIPR_ADCSRC 2024-01-30 18:07:57 -05:00
Andrei Korigodskii eeb9c5256a boards: add support for Matek H743 Slim V3 
IMUs were replaced in V3 with 2x ICM42688P. This configuration should
work with all revisions of Matek F743 Slim board, including V1, V1.5
and interim variant of V3 (ICM42688P + ICM42605).

Signed-off-by: Andrei Korigodskii <akorigod@gmail.com>
 2023-10-13 20:59:59 -04:00
Silvan Fuhrer 563fd8427a boards: increase init stack size by 100B 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2023-10-02 09:37:06 +02:00
Igor Mišić c1dbe177b8
boards: move FRAM emulated sector size to the 32-byte granularity (#21204) 2023-09-20 16:50:36 -04:00
alexklimaj 3d61ab84c4 Cannode add ability to get node ID after boot. Fix ARK CAN OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO_INVERT 2023-08-30 11:40:01 -04:00
Beat Küng c95539e8ce boards: increase init stack size by 150B 
External airframes need a bit more stack due to nested configs.
 2023-06-09 21:11:11 -04:00
Beniamino Pozzan 9e5420bbbd microdds_client: rename to uxrce_dds_client 
| | old version | new version (second proposal) |
|-|-|-|
| module name | `microdds_client` | **`uxrce_dds_client`** |
| strings / comments about the module | non consistent | **UXRCE-DDS Client** |
| menuconfig option | `MODULES_MICRODDS_CLIENT` | **`MODULES_UXRCE_DDS_CLIENT`** |
| module parameters group name | `Micro XRCE-DDS` | **UXRCE-DDS Client** |
| module parameters name prefix | `XRCE_DDS_` | `UXRCE_DDS_` |
| module class name | `MicroddsClient` | **`UxrceddsClient`** |
|`init.d/rcS` whenever the module is mentioned | `microdds` | **`uxrce_dds`** |
| main doc page name | XRCE-DDS (PX4-FastDDS Bridge) | **uXRCE-DDS (PX4-micro XRCE-DDS Bridge)**|
| environment variable to have custom namespace in simulation | PX4_MICRODDS_NS | **PX4_UXRCE_DDS_NS** |

Signed-off-by: Beniamino Pozzan <beniamino.pozzan@phd.unipd.it>
 2023-05-03 11:51:53 -07:00
Thomas Stastny 82fd2987c9
fw pos control: revert name until we delineate this module a bit more (#21442) 2023-04-13 17:00:04 +02:00
Alex Klimaj ea97a38b2b
Initial Cannode PWM Support (#19748) 
* Add uavcannode esc/servo pwm control pipeline
* Remove cannode rc.interface with mixer purge
* Cannode add Kconfig options to reduce flash usage
 2023-03-15 11:20:07 -04:00
Konrad 3e200bca0d fw_pos_control_l1: renaming to fw_path_navigation, l1 control is not used anymore, use a more generic naming. 2023-02-09 17:51:55 +01:00
Daniel Agar 3822ef1519 boards: update all in tree bootloaders 2023-01-19 17:25:39 -05:00
Daniel Agar 45912066d2 fix copyright header year range 2023-01-14 09:16:16 -05:00
Daniel Agar 635daeed8a NuttX push jlink-nuttx into cmake and enable CONFIG_DEBUG_TCBINFO by default 2023-01-12 09:05:26 -05:00
PX4 BuildBot e6c4416250 update all px4board kconfig 2023-01-07 21:53:01 -05:00
Daniel Agar dc5ce9b0ce
boards: NuttX increase default CONFIG_ARCH_INTERRUPTSTACK 512->768 bytes 
- during casual testing on default configs the stack was penetration was reaching ~90% which is a bit too close for comfort
 - increasing by 50% to be conservative
 2023-01-07 12:07:35 -05:00
JaeyoungLim 21e88f64b4
Add new fixed wing rate control module (fw_rate_control) 
* Fixedwing rate control into a separate module
* Start fw_rate_control for vtol
* Move over airspeed related parameters to fw_rate_control

Co-authored-by: Silvan Fuhrer <silvan@auterion.com>
 2023-01-04 11:14:00 -05:00
Daniel Agar 40e3503c39 boards: fix all NuttX configs (CONFIG_SMALL NuttX upgrade migration) 2022-12-29 12:50:37 -05:00
Daniel Agar 0fbb6db6d4 boards: update all NuttX defconfig (make all_olddefconfig) 2022-12-29 12:50:37 -05:00
Daniel Agar c2f15f5957 boards: update all px4boards (make all_px4_savedefconfig) 2022-12-29 12:50:37 -05:00
Daniel Agar 41fa53605c
boards: rebuild STM32H7 bootloaders and px4-io-v2 2022-12-09 11:02:21 -05:00
Daniel Agar 2cb4ef0629
NuttX 10.3+ upgrade (#20190) 
Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com>
Co-authored-by: David Sidrane <David.Sidrane@NscDg.com>
Co-authored-by: alexklimaj <alex@arkelectron.com>
 2022-11-20 20:28:07 -05:00
Daniel Agar cea185268e
msg ROS2 compatibility, microdds_client improvements (timesync, reduced code size, added topics, etc), fastrtps purge 
- update all msgs to be directly compatible with ROS2
 - microdds_client improvements
   - timesync
   - reduced code size
   - add to most default builds if we can afford it
   - lots of other little changes
 - purge fastrtps (I tried to save this multiple times, but kept hitting roadblocks)
 2022-10-19 19:36:47 -04:00
matthewoots b09329f287
boards/matek/h743: add fix to resolve no startup of imu for matek_h743 target (#20184) 
* Add fix for matek_h743 target that resolves no startup of imu for h743-wing v3 and h743-wlite boards
* Added imu driver according to spi bus (https://www.mateksys.com/?portfolio=h743-wing-v2#tab-id-7)
 2022-09-09 13:02:38 -04:00
Daniel Agar d3312f955f delete systemcmds/pwm 2022-09-09 09:14:09 -04:00
Daniel Agar 5dd1e5a018 delete systemcmds/mixer 2022-09-09 09:14:09 -04:00
Igor Mišić f929017618 boards: link missing arch_io_pins lib 2022-07-31 11:19:20 -04:00
alexklimaj 4cc3e78558 Add mag bias estimator to CAN GPS units with IMUs 
- run `sensors` hub to process sensor_mag and publish vehicle_magnetometer
 - update uavcannode to use vehicle_magnetometer
 2022-06-19 15:46:36 -04:00
Daniel Agar 5b6e5a0968 boards: NuttX update all boards to preallocated sem holder list 
- CONFIG_SEM_PREALLOCHOLDERS=32
 - CONFIG_SEM_NNESTPRIO=16 (default)
 2022-05-31 01:41:07 -07:00
David Sidrane 479b52fd02 Update all H7 Bootloders 2022-05-27 14:25:25 -04:00
David Sidrane fd81951391
boards: STM32H7 pad to 256 bit - 32 bytes (#19724) 2022-05-27 14:04:51 -04:00
achim 3fe4c6e3f5
boards: matek h743-mini specify drivers to still fit to flash 
- the code has become a bit bigger again that now the drivers have to be specified a bit more precisely to still fit into the flash.
 2022-05-13 14:05:04 -04:00
Daniel Agar 6d390f393c
boards: matek_h743-mini_bootloader fix NuttX CONFIG_ARCH_BOARD_CUSTOM_DIR 2022-05-10 11:28:26 -04:00
Daniel Agar 5778553508
boards: matek_h743_bootloader fix NuttX CONFIG_ARCH_BOARD_CUSTOM_DIR 2022-05-10 11:26:15 -04:00
achim 9c12c2a152
boards: matek h743 update unified target 2022-05-06 14:57:37 -04:00
achim 76cf4332d9
boards: matek_h743-mini sync all Matek H743 boards 2022-05-06 14:56:20 -04:00
achim a71cf21c28
boards: matek_h743-slim_default try to fit as many modules of all categories as possible into the flash. 2022-05-06 10:13:30 -04:00
achim 87ebf17ab0
boards: matek h743 enable 12 pwm outs on slim and wing V1.0 and V1.5 2022-05-06 10:10:59 -04:00
achim fc887a23af
boards: matek h743 mini 2022-05-06 10:09:14 -04:00
achim bf8d759d3d
boards: matek h743 slim support v1 and v1.5 IMU variants 
- remove temp compensation to still fit into flash
 2022-05-04 14:05:16 -04:00
Daniel Agar 7bb789cb23
boards: update bootloaders to latest 2022-04-25 22:39:25 -04:00
Ryan Johnston 777540bd02
boards/matek/gnss-m9n-f4: RM3100 orientation fix 
- the RM3100 needs to be pitched 180º for correction orientation on this board.
 2022-04-09 14:22:21 -04:00
Ryan Johnston c585758f67
boards/matek/gnss-m9n-f4: IMU orientation update 
- the icm20602 needs to be rolled 180º and yaw 90º for this board.
 2022-04-09 14:21:45 -04:00
Charles Cross f31f3370ef
Add support for Timer15 on H743 boards (#19228) 
* Adds Timer15 to stm32_common, if the timer base is defined
* Adds Timer15 logic for DMA and AltFunc config on stm32h7 boards
* Adds TIM15 BDTR->MOE support in stm32_common timer init
* Adds support for TIM15 pwm channels on Matek H743 Slim
 2022-02-21 16:52:38 -05:00
Daniel Agar abfa3d23a5
boards: matek h743-slim fix STM32_SDMMC_SDXFR_CLKDIV typo 2022-02-16 10:28:01 -05:00
Charles Cross f9feb04f8b Changes SDIO clock speed to 20MHz for the Matek H743 slim 
Signed-off-by: Charles Cross <charles@missionrobotics.us>
 2022-02-15 09:38:09 -08:00
David Sidrane fd1aa3cfb9 matek_gnss-m9n-f4:Use CONFIG_BOARD_SERIAL_GPSn for serial_passthru 2022-02-09 13:11:52 -05:00
David Sidrane 0c936e4fd2 serial_passthru:Move CONFIG_xxx to serial_passthru 2022-02-09 13:11:52 -05:00
Viktor Vladic f4d02a2937
MatekH743 board_id, usb vid/pid changes, and MPU6000 delay before transfer - not after (#18733) 
* Make board_id compatible with ardupilot
 * Initialize outputs for CAM1/CAM2 and Vsw pad
 * Correct board type 1013 in bootloader to match AP
 * Change usb vendor string to "Matek"
 * Change cdcacm pid to 1013
 * Comment out FLASH_BASED_PARAMS because of #15331
 2022-02-07 19:55:49 -05:00
Julian Oes 490a0c473b Rename vmount to gimbal 2022-02-07 19:21:15 -05:00
David Sidrane ec441fdba6 gnss-m9n-f4:Add serial_passthru 2022-02-01 21:49:29 -05:00