dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity
32,391 Commits 514 Branches 136 Tags 234 MiB
Commit Graph

2128 Commits

Author SHA1 Message Date
斯东Stone c07b687753 Set Power Monitor to a Neutral Position for PX4 Vision 
Reference manual in box, and Holybro's website.
 2020-05-11 14:27:03 -04:00
Daniel Agar 04113b4d57 commander: changes when USB connected 
- skip avionics rail voltage check when USB connected
 - skip forced reboot on USB disconnect if circuit breaker set
 - avionics voltage preflight check don't silently fail if system_power unavailble
     - explicitly set supply check circuit breaker (CBRK_SUPPLY_CHK)
 2020-05-06 13:53:54 -04:00
Daniel Agar ca998c1822
IMU: parameterize IMU integration time (IMU_INTEG_RATE) 
- default integration rate now 200 Hz (5000 us interval)
 - set update rate for all drivers and simulators using PX4Accelerometer/PX4Gyroscope
 2020-05-05 20:34:09 -04:00
JaeyoungLim b10cbd2892 Fix shibang of r1_rover airframe config 
The shibang was missing in the previous commit where this file was added
 2020-05-05 10:01:26 -04:00
kritz 33dc0fd146
Add vision velocity integration test (#14818) 2020-05-05 11:14:30 +02:00
JaeyoungLim cae28cd59a
Add aion robotics r1 rover sitl target (#14652) 
This adds a sitl target and aiframe configs for the r1_rover, which is a differential rover example for SITL rover. The model is based on the aion robotics r1 rover
 2020-05-05 11:07:02 +02:00
JaeyoungLim cd59f95565 Add additional flap channel in mixer 
Since sitl gazebo is unable to control to joints from a single channel, an additional mixer is defined
 2020-05-01 21:01:33 -04:00
baumanta 545b8118a8 change solo mag rotation to new convention 2020-05-01 21:00:55 -04:00
Jakub Kákona dfa5ca1710
FlightGear simulator support (#14539) 
- Add flightgear_bridge submodule.
- Add traget px4_sitl_nolockstep with disabled  LOCKSTEP simulation.
- Add flightgear viewer targets and startup scripts
- Add a few possible vehicles plane (rascal), autogyro (tf-g1), and rover (tf-r1))

Co-authored-by: Vit Hanousek <vithanousek@seznam.cz>
 2020-04-29 08:46:59 +02:00
Hamish Willee 8236b8da81 Fix up doc links to point to master branch 2020-04-21 08:58:40 +02:00
JaeyoungLim 75054f11df
Add px4vision sitl target 
- Use px4vision parameters
 2020-04-20 18:08:41 -04:00
JaeyoungLim 6e18cb85b1 Add plane lidar model 
Add model that can test terrain estimated landing
 2020-04-19 17:09:42 -04:00
Matthias Grob ffa9fdbd56 posix rcS: always disable CPU load check 2020-04-17 18:25:07 +02:00
flbernier 3b0f2a4d43 Swap Ki and Kd in rover related airframes 2020-04-17 08:18:10 +02:00
Matthias Grob 8b76c0c023 PreFlightCheck: add checks for CPU and RAM load 2020-04-16 11:45:50 +02:00
mcsauder 6548fde024 Whitespace cleanup to quiet new blank line at EOF git hook. 2020-04-15 23:00:39 -04:00
Matthias Grob c9e64988b9 GPS Dynamic model default <1g 
Only have it higher for VTOL and fixed wing.
Multicopter position controlled flight is in our experience always <1g.
Acrobatic flying definitely exceeds the acceleration but if control
doesn't rely on the GPS velocity and position there shouldn't be any
problem.
 2020-04-08 11:52:38 -04:00
Nico van Duijn df07eed1a4 PX4Vision: tune MPC_LAND_ALT 2020-04-08 11:52:01 -04:00
Daniel Agar 7aa7f0ed95 switch remaining boards to new InvenSense IMU drivers 2020-04-07 09:59:12 -04:00
AlexKlimaj d8c140be04
UAVCAN Smart Battery Improvements 2020-04-06 21:09:02 -04:00
Julian Oes 641612468b ROMFS: start esc_battery if param is set 2020-04-06 15:56:54 +02:00
RomanBapst 0d8d4cd6e0 SITL configs: improve L1 tracking and increase backtransition duration 
-decrease L1 period for tighter mission tracking in fw mode
- increase backtransition duration, we can now do this is we have active
deceleration control

Signed-off-by: RomanBapst <bapstroman@gmail.com>
 2020-04-02 23:54:48 -04:00
Daniel Agar ca81175b07 rename drivers/px4fmu -> drivers/pwm_out 
- split out header
 2020-03-31 19:12:31 -04:00
Matthias Grob bda072512a rc.vtol_defaults: reduce maximum jerk to 4.5 m/s³ based on testing feedback 
@fury1895 reported very valuable feedback from testing
the acceleration feed-forward on VTOL:
> MPC_JERK_MAX 4.5 (from 5 on it felt too aggressive)
> MPC_JERK_AUTO 4
> some hovering, some transitions, and a mission. Everything good.
> I'd say you feel the difference in position mode and you see it in
> Auto modes. Great improvement!
 2020-03-30 09:58:39 +02:00
Matthias Grob bc2579f3be mc_pos_control_params: lower jerk configuration 
because of tighter tracking with acceleration feed-forward.
 2020-03-30 09:58:39 +02:00
Daniel Agar 28dc225015 add SENS_EN_PAW3902 to start paw3902 optical flow sensor 2020-03-26 13:08:59 -04:00
Beat Küng 2b360bfd48 rcS: fixes for SYS_USE_IO=0 
rc.io is called from 2 places in rc.interface:
- if [ $OUTPUT_MODE = io -o $OUTPUT_MODE = uavcan_esc ]:
  - 'set OUTPUT_MODE io' is only set within USE_IO=yes, so removing
    the check in rc.io has no effect.
  - in case of UAVCAN, we also want the IO for RC, now covered in the next
    case.
- Further down ('Start IO for RC input if needed.').
  This is intended to start IO for RC only, when fmu is already started.
  However the previous check '$USE_IO = yes' in rc.io prevented that.

In addition we don't start rc_input in case of $USE_IO = no.

Fixes no RC on Pixhawk 2 with SYS_USE_IO=0.
 2020-03-26 10:33:27 -04:00
Anurag Sai Vempati bcfe56b297
replay: apply replay module params before starting ekf2 (#14478) 2020-03-26 10:02:15 +01:00
Hyon Lim 1161dac875 Script update: PMW3901 driver argument has changed. so we change scripts and SPI interface. 2020-03-25 16:16:45 -04:00
Hyon Lim 1a23b7c609 IFO-S parameter updated. 2020-03-25 16:16:45 -04:00
Hyon Lim 15f997d337 Airframe: IFO-S setup is added. 2020-03-25 16:16:45 -04:00
SalimTerryLi dc8e775d8f
ADC: replace ioctl with uorb message (#14087) 2020-03-20 11:23:32 +01:00
Beat Küng e4bf535595 refactor bst telemetry: use driver base class 2020-03-17 23:31:17 -04:00
Beat Küng 1710cd9648 refactor px4flow: use driver base class 2020-03-17 23:31:17 -04:00
Beat Küng ec2de33547 lights: use driver base class 2020-03-17 23:31:17 -04:00
Beat Küng 3b7b2dc871 differential_pressure sensors: use driver base class 2020-03-17 23:31:17 -04:00
Beat Küng 83b367f000 refactor teraranger: use driver base class 2020-03-17 23:31:17 -04:00
Beat Küng a6ddf0e4b9 refactor sf1xx: use driver base class 2020-03-17 23:31:17 -04:00
Beat Küng f743585160 refactor mb12xx: use driver base class 2020-03-17 23:31:17 -04:00
Beat Küng 7e3f40d1c2 refactor mappydot: use driver base class 2020-03-17 23:31:17 -04:00
Beat Küng 1b1e1ba31f refactor ll40ls: use driver base class 2020-03-17 23:31:17 -04:00
Beat Küng df99555132 refactor ll40ls: split I2C and PWM into separate drivers 
- there was almost nothing shared
- it will fit better into the updated I2C driver structure
 2020-03-17 23:31:17 -04:00
Beat Küng 58f386a81c refactor pmw3910: use driver base class 2020-03-17 23:31:17 -04:00
Lorenz Meier 4f1749541c ROMFS: Exclude uncommon board configs (Generic 250) 2020-03-16 23:40:29 +01:00
Lorenz Meier cff36315c4 ROMFS: Exclude uncommon board configs (Beta75x) 2020-03-16 23:40:29 +01:00
Lorenz Meier f7455db20c ROMFS: Exclude uncommon board configs (Reaper) 2020-03-16 23:40:29 +01:00
Lorenz Meier 98c9e558ca ROMFS: Exclude uncommon board configs (3DR Quad) 2020-03-16 23:40:29 +01:00
Lorenz Meier 48d1c355c3 ROMFS: Exclude uncommon board configs (Solo) 2020-03-16 23:40:29 +01:00
Lorenz Meier 4c8866059d ROMFS: Exclude uncommon board configs (HK Micro) 2020-03-16 23:40:29 +01:00
Lorenz Meier ebf52a988a ROMFS: Exclude uncommon board configs (HB PX4 Vision) 2020-03-16 23:40:29 +01:00