21d7e4f24f
Merge pull request #8 from tumbili/serial_device
...
read serial device to obtain manual control setpoint
2015-05-12 14:36:18 -07:00
3a79679e2d
get manual control setpoint from PIXHAWK
2015-05-12 23:15:58 +02:00
3db5f3bb3b
QuRT: toolchain changes
...
Reworking toolchain and main.cpp for QuRT to a final link can be
done and the apps.h file is autogenerated.
Signed-off-by: Mark Charlebois <charlebm@gmail.com>
2015-05-12 11:37:28 -07:00
14cbd240ff
QuRT: added qurt_log
...
Implement as a printf for now
Signed-off-by: Mark Charlebois <charlebm@gmail.com>
2015-05-11 19:38:03 -07:00
d0bf4ab449
Simulator: refactored mavlink additions
...
QuRT does not support UDP so moved the mavlink specific code
to a new file that is not built for the qurt target
Signed-off-by: Mark Charlebois <charlebm@gmail.com>
2015-05-11 19:25:11 -07:00
2f434eb395
POSIX: fixups for px4_log.h change
...
After merge from qurt branch, fixups for posix build
Signed-off-by: Mark Charlebois <charlebm@gmail.com>
2015-05-11 16:14:06 -07:00
2d32395bc0
Merge branch 'qurt' into linux
2015-05-11 16:07:53 -07:00
a99f916bdf
POSIX: Changed px4_debug.h to px4_log.h
...
Also changed use of printf to PX4_WARN or PX4_INFO in posix and
qurt tests.
Signed-off-by: Mark Charlebois <charlebm@gmail.com>
2015-05-11 16:04:39 -07:00
11010a648c
Merge pull request #7 from tumbili/polling
...
implemented polling to prevent unnecessary cycling.
2015-05-11 15:00:48 -07:00
c074d6e913
implemented polling of socket file descriptor and uorb topic file descriptor
2015-05-11 23:55:11 +02:00
c303525336
Merge pull request #6 from tumbili/simulator_udp
...
implemented bidirectional udp communication with simulator
2015-05-11 08:39:04 -07:00
b3ed0cf36b
Navigator: be more verbose about RTL
2015-05-11 09:37:42 +02:00
a124bc07aa
Ensure SYS_AUTOSTART param is always selected
2015-05-10 23:58:25 +02:00
7f3f572c40
Always boot, even with no pressure sensor or ADC. Fixes #2151
2015-05-10 10:21:16 +02:00
b6441d2966
implemented new mixer strategy
2015-05-10 00:42:53 +02:00
9119687177
make socket non-blocking, moved socket includes to header file to avoid forward declarations
2015-05-09 10:35:25 +02:00
39711ca908
implemented bidirectional udp communication with simulator
2015-05-08 21:51:21 +02:00
29eeb724a1
commander: Enforce rotation during mag calibration step
2015-05-08 11:23:19 +02:00
3be1fc7d42
commander gyro calibration: Do not require a specific position, automatically start a retry after motion on the first try
2015-05-08 11:01:19 +02:00
0ba5305e94
QuRT: satisfy missing deps
...
There is no ioctl or write. Added stubs.
Signed-off-by: Mark Charlebois <charlebm@gmail.com>
2015-05-07 23:21:24 -07:00
84ca66dcf7
QuRT: updated task support based on posix fixes
...
The posix layer implementations should work on QuRT.
QuRT needs to provide a way for getting the current time.
Signed-off-by: Mark Charlebois <charlebm@gmail.com>
2015-05-07 22:58:51 -07:00
3225edfabb
QuRT: Really reverted to non-posix APIs
...
Using non-posix APIs for now.
Signed-off-by: Mark Charlebois <charlebm@gmail.com>
2015-05-07 21:51:02 -07:00
ad1865ef9f
QuRT: Move to POSIX API for threads
...
Use the pthread APIs to implement task support
Signed-off-by: Mark Charlebois <charlebm@gmail.com>
2015-05-07 14:55:28 -07:00
8dfb09418b
QuRT: added #include<px4_time.h> to posix unit tests
...
QuRT does not define usleep and sleep, so they are stubbed out
for now.
Signed-off-by: Mark Charlebois <charlebm@gmail.com>
2015-05-07 14:40:31 -07:00
8caefc183d
QuRT: updated toolchain file to link against libdspal.a
...
Signed-off-by: Mark Charlebois <charlebm@gmail.com>
2015-05-07 13:23:45 -07:00
fd3715912e
QuRT: stub out missing functions
...
Stub out the missing functions to enable running in the simulator
Signed-off-by: Mark Charlebois <charlebm@gmail.com>
2015-05-07 12:54:39 -07:00
632f77df49
QuRT: add drivers/led
...
The drivers/led module was missing from the QuRT config
Signed-off-by: Mark Charlebois <charlebm@gmail.com>
2015-05-07 11:55:24 -07:00
a0d548db9a
Changed circuit_breaker to not use px4.h
...
The inclusion of px4.h requires C++ features not supported in the
Hexagon toolchain. The features are not required so the required
headers are used instead.
Signed-off-by: Mark Charlebois <charlebm@gmail.com>
2015-05-07 11:35:01 -07:00
99822038f3
POSIX: Fixed px4_open code to not create a file when opening a device
...
The code to created a virtual file was preventing the creation of
device nodes.
Signed-off-by: Mark Charlebois <charlebm@gmail.com>
2015-05-07 10:50:23 -07:00
4216a0d64d
POSIX: remove check for /tmp/ttyS{0|1}
...
The posix build now disables the UART code in mavlink.
Signed-off-by: Mark Charlebois <charlebm@gmail.com>
2015-05-07 10:46:10 -07:00
41a2d30cfe
Merge branch 'linux' of http://github.com/mcharleb/Firmware into linux
2015-05-07 10:08:56 -07:00
2002d4e774
POSIX: disable UART in mavlink
...
Most of the current POSIX builds will not use the UART and it
is just a unnecessary dependency to satisfy when running in a
test environment.
Signed-off-by: Mark Charlebois <charlebm@gmail.com>
2015-05-07 10:07:18 -07:00
5e2af2b227
POSIX: fixed return values to be posix compliant
...
px4_read, px4_write, and px4_opctl were not returning the correct
value on error. They were returning -errno vs -1.
Signed-off-by: Mark Charlebois <charlebm@gmail.com>
2015-05-07 09:38:03 -07:00
cc62033190
improve mavlink set_attitude_target handling
...
port #1920 to mavlink_receiver
fixes #1921
2015-05-07 16:44:54 +02:00
1d544e028d
mc_pos_control: always update previous velocity to avoid spikes due to differentiation
2015-05-07 15:04:59 +02:00
5003875911
Merge pull request #2141 from PX4/quat_sp
...
copy quaternion setpoint into attitude setpoint topic
2015-05-07 14:29:26 +02:00
5cf8efcc60
copy quaternion setpoint into attitude setpoint topic
2015-05-07 12:36:50 +02:00
bf23ca70c5
Added log entries for the rc.interfaces file as well.
2015-05-07 10:18:03 +02:00
8144a84bc3
Make sure we have a boolog.txt entry for critical failures.
2015-05-07 10:18:03 +02:00
ea8ba79481
Read the current flight termination circuit breaker value, not just updated values.
2015-05-07 08:27:41 +02:00
db8dd000e3
l3gd20: follow same pattern as lsm303d for duplicate rejection
2015-05-07 15:16:34 +10:00
a710159263
mpu6000: sample at 200usec faster rate to avoid aliasing
...
this runs the mpu6000 200usec faster than requested then detects and
disccards duplicates by comparing accel values. This avoids a nasty
aliasing issue due to clock drift between the stm32 and mpu6000
2015-05-07 15:16:32 +10:00
3ac95fb581
lsm303d: run sampling 200usec faster to avoid aliasing
...
this runs the sampling of the accelerometer 200usec faster than
requested and then throw away duplicates using the accelerometer
status register data ready bit. This avoids aliasing due to drift in
the stm32 clock compared to the lsm303d clock
2015-05-07 15:16:29 +10:00
6db77dc8bb
Experimental virtual file support
...
QuRT does not have a filesystem, so creating a virtual filesystem
that could be implemented as an in-memory file or a remote file
over fastRPC.
Signed-off-by: Mark Charlebois <charlebm@gmail.com>
2015-05-06 22:12:45 -07:00
35e6822d95
Added missing px4_ prefixes
...
NuttX build required missing px4_ prefix for systemreset and task_spawn_cmd
Signed-off-by: Mark Charlebois <charlebm@gmail.com>
2015-05-06 16:25:45 -07:00
a0d58552a0
blinkm: merged NuttX and POSIX impelmentations
...
Signed-off-by: Mark Charlebois <charlebm@gmail.com>
2015-05-06 16:24:18 -07:00
948b47bd33
Removed px4_killall
...
killall and px4_killall are not used in the codebase so it was removed.
Signed-off-by: Mark Charlebois <charlebm@gmail.com>
2015-05-06 16:04:20 -07:00
3a65187303
Fixed bad merge
...
Forgot to remove old file line when merging the changes from master.
Signed-off-by: Mark Charlebois <charlebm@gmail.com>
2015-05-06 16:00:00 -07:00
db52227409
Merge remote-tracking branch 'upstream/master' into linux
...
Signed-off-by: Mark Charlebois <charlebm@gmail.com>
Conflicts:
src/modules/commander/accelerometer_calibration.cpp
2015-05-06 15:51:39 -07:00
04b564920f
POSIX: Make binutils BDF linker the default
...
ld.gold does not support the -Ur flags and it seems some people have
ld as a link to ld.gold.
Made LD = ld.bfd to avoid confusion.
Signed-off-by: Mark Charlebois <charlebm@gmail.com>
2015-05-06 15:44:37 -07:00
mcharleb
tumbili
Lorenz Meier
Thomas Gubler
Roman Bapst
Lorenz Meier
Simon Wilks
Andrew Tridgell