dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity
35,140 Commits 514 Branches 136 Tags 234 MiB
Commit Graph

50 Commits

Author SHA1 Message Date
Daniel Agar ad934b4911
icm20948 i2c passthrough driver for ak09916 magnetometer (Here+ GPS/compass) 
- include icm20948 on most boards by default
 - create more test variants for default boards near flash limit (cuav_nora_test, cuav_x7pro_test, holybro_durandal-v1_test)
 2021-04-04 21:18:16 -04:00
Daniel Agar 43da43ddc6 boards: cubepilot cubeorange Add remaining SRAM4 & DTCM to heap 2021-04-03 14:13:23 -04:00
Daniel Agar 6874e9fba0 boards: NuttX disable all NSH memory debug commands (mb, mh, mw) by default 
- closes https://github.com/PX4/PX4-Autopilot/issues/17062
 2021-03-30 09:23:43 -04:00
Daniel Agar 631d1647d3 boards: minimize unnecessary differences in default variants 2021-03-28 14:46:47 -04:00
Daniel Agar e77bffe582 boards: STM32H7 remove CONFIG_MM_REGIONS=3 2021-03-26 17:40:44 -04:00
David Sidrane cdcff35760 cubepilot cubeorange:Enable ADC3 in support of temperature sensing 2021-03-19 15:48:47 +01:00
David Sidrane 7bc2393936 cubepilot cubeorange:Enable ADC3 in support of temperature sensing 2021-03-19 15:48:47 +01:00
Daniel Agar be58db1ec9 boards: cubepilot_cubeorange_console add gyro_fft 2021-03-16 00:49:45 -04:00
Daniel Agar 4b99bd2077 boards: remove optional external ADIS IMUs to save flash 2021-03-15 13:37:24 -04:00
Daniel Agar 2257c3767e simple gyro auto calibration module 2021-03-15 09:46:47 +01:00
Daniel Agar f8eaa6e46b ROMFS handle bl_update generically 
- include all available legacy bootloaders
 2021-03-11 00:38:18 +01:00
Daniel Agar 4d288512b5 add board architecture specific init defaults 2021-03-09 19:59:41 +01:00
Daniel Agar a0b9b44ff6 boards: stm32h7 set CONFIG_SDMMC1 consistently 2021-03-09 09:37:05 -05:00
Daniel Agar 19de1e57e3 gyro_fft promote to modules and include on all boards 2021-03-05 10:56:54 -05:00
Beat Küng 7e33d03470 drivers: remove tap_esc 
- it's not used anymore
- it would need a refactoring to use mixer_module
 2021-02-25 09:28:37 -05:00
Daniel Agar 414f9f81d9
move fake GPS to standalone module 2021-02-20 14:13:36 -05:00
Daniel Agar ab0d0fd0be
uORB move to PX4 platform layer 2021-02-17 11:25:56 -05:00
Daniel Agar 44df0fb7a2 Analog Devices ADIS16448 rewrite 
- new IMU driver structure with state machine (no sleeps in bus thread)
 - verify all configured registers and trigger reset on failure
 - detect if DIO1 or DIO2 are actually connected for data ready interrupt usage
 - don't use CRC-16 on burst transfers except for verified lots
 2021-02-16 10:29:07 +01:00
Daniel Agar fb2a199621 delete unmaintaned mkblctrl driver 2021-02-14 10:38:15 +01:00
Daniel Agar a257120e8d boards: use new param default mechanism 2021-02-12 08:27:47 -05:00
Daniel Agar 8f0918a16b boards: remove unused linker __param section 2021-02-08 23:22:48 -05:00
Daniel Agar a2442ffb48 board: enable UAVCAN sensors by default on F7/H7 2021-02-02 09:01:12 +01:00
Daniel Agar 3b71e8e62d boards: cubepilot fix BAT2_V_DIV param default typo 2021-01-31 21:16:42 -05:00
Daniel Agar 318c7e83b3 support up to PWM 14 
- generate PWM_MAIN 1-14
 - generate PWM_AUX 1-8
 - generate PWM_EXTRA 1-8
 - px4io and pwm_out directly read configuration parameters
    - only available and active physical outputs are actually shown for configuration
 - overall saves flash despite adding many new parameters
 2021-01-30 15:55:53 +01:00
Daniel Agar 1ec10bfcc6
boards: disable CONFIG_ARMV7M_LAZYFPU again (#16573) 
- this was causing hard faults on the CUAV Nora and possibly other boards, disabling everywhere until we fully understand the root cause
 2021-01-17 22:40:21 -05:00
Daniel Agar cb74cb8692 boards: enable CONFIG_ARMV7M_LAZYFPU everywhere 2021-01-12 09:04:38 +01:00
Daniel Agar 763c3b8fda boards: start enabling multi-EKF by default on F7/H7 2021-01-10 17:56:34 +01:00
Matthias Grob 7545249215 Add flight_mode_manager to all targets with mc_pos_control 2020-12-30 10:25:08 -05:00
David Sidrane 22bc176885 Added mft for queries 2020-12-02 20:40:23 -05:00
David Sidrane 55c091e0fc cubepilot_cubeyellow: Use px4_platform_configure 2020-12-02 20:40:23 -05:00
David Sidrane 6b93865cfc cubepilot_cubeorange: Use px4_platform_configure 2020-12-02 20:40:23 -05:00
Daniel Agar ce51a01822
boards: cubepilot orange and yellow start isolated sensor bus (SPI4) first 
- this makes the isolated sensors primary by default
 2020-11-16 09:31:12 -05:00
Daniel Agar c60743b306 boards: NuttX increase file name max 32 -> 40 2020-11-08 12:51:59 -05:00
David Sidrane 39b1d827d2 cubeorange:Bootloader init NULL console 2020-10-28 14:25:25 -04:00
Daniel Agar 233949a377 NuttX upgrade to 10.0.0+ defconfig changes 2020-10-28 14:25:25 -04:00
Daniel Agar 762d925d20 boards: cubepilot orange/yellow fix BOARD_DSHOT_MOTOR_ASSIGNMENT 2020-09-24 10:53:54 -04:00
Daniel Agar 2728af4264
boards: cubeorange and cubeyellow disable serial console (used for ADSB on new carrier boards) 
- add console builds (cubepilot_cubeorange_console) for hardware test rack and developers
 2020-09-21 11:53:49 -04:00
David Sidrane fc5caf382c cubepilot_cubeyellow: Updates for NuttX 9.1.0+ External schedule_note 2020-09-16 21:32:04 -04:00
David Sidrane 0d9d1e79e8 cubepilot_cubeorange: Updates for NuttX 9.1.0+ External schedule_note 2020-09-16 21:32:04 -04:00
David Sidrane f9adf861dc spracing_h7extreme Updates for NuttX 9.1.0- 2020-09-16 21:32:04 -04:00
David Sidrane f21925f976 cubepilot_io-v2: Updates for NuttX 9.1.0- 2020-09-16 21:32:04 -04:00
David Sidrane e8e463b875 cubepilot_cubeyellow Updates for NuttX 9.1.0- 
cubepilot_cubeyellow: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00
David Sidrane 5691bf1dee cubepilot_cubeorange Updates for NuttX 9.1.0- 
cubepilot_cubeorange: defconfig MMCSD enable multiblock
 2020-09-16 21:32:04 -04:00
SalimTerryLi c037dbef21
Rename and move src/drivers/adc to src/drivers/adc/board_adc 2020-09-07 23:09:20 -04:00
Beat Küng 787f9c1213 i2c: use board-specific bus numbering for '-X -b <bus>' CLI 
As boards don't have their external buses labeled consistently, it was not
useful to use an abstraction.
 2020-09-03 15:32:35 -04:00
CUAVcaijie 536877cf0a
boards: add UAVCAN timer override mechanism and CUAV X7 add CAN (#15348) 
* X7Pro adds CAN driver
* UAVCAN timer selection moved to default.cmake
* Modify some details about @CUAVcaijie UAVCAN timer selection moved to default.cmake
* Put some timer parameters to micro_hal.h from board_config.h. Fix all h7 boards

Co-authored-by: honglang <honglang@cuav.net>
 2020-08-28 12:16:48 -04:00
Daniel Agar 2c3441aa90 boards: reduce CONFIG_NFILE_DESCRIPTORS 15 -> 12 
- reduced now that calibration uses uORB::Subscription
 - can likely be reduced further (perhaps < 8) with additional testing
 2020-08-21 10:12:13 -04:00
Daniel Agar 91ad8473ab boards: cubepilot/cubeorange small fixes and improvements 
- defconfig UART sync with cube yellow (and other boards)
 - manually start ak09916 (Here2) on I2C2 with proper rotation
 2020-08-16 17:45:47 -04:00
Daniel Agar 65ab7cef2e boards: cubepilot/cubeyellow small fixes and improvements 
- fix UART config (GPS1, etc)
 - TELEM2 enable TX DMA
 - init simplify (sync with CubeOrange)
 - amber LED use for armed state
 - manually start ak09916 (Here2) on I2C2 with proper rotation
 2020-08-16 17:45:47 -04:00
Daniel Agar cfbf69f2a7
boards: rename Hex -> CubePilot 
- hex_cube-orange_default -> cubepilot_cubeorange_default
 - hex_cube-yellow_default -> cubepilot_cubeyellow_default
 2020-07-26 13:55:41 -04:00