c1dbe177b8
boards: move FRAM emulated sector size to the 32-byte granularity ( #21204 )
2023-09-20 16:50:36 -04:00
3d61ab84c4
Cannode add ability to get node ID after boot. Fix ARK CAN OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO_INVERT
2023-08-30 11:40:01 -04:00
c95539e8ce
boards: increase init stack size by 150B
...
External airframes need a bit more stack due to nested configs.
2023-06-09 21:11:11 -04:00
9e5420bbbd
microdds_client: rename to uxrce_dds_client
...
| | old version | new version (second proposal) |
|-|-|-|
| module name | `microdds_client` | **`uxrce_dds_client`** |
| strings / comments about the module | non consistent | **UXRCE-DDS Client** |
| menuconfig option | `MODULES_MICRODDS_CLIENT` | **`MODULES_UXRCE_DDS_CLIENT`** |
| module parameters group name | `Micro XRCE-DDS` | **UXRCE-DDS Client** |
| module parameters name prefix | `XRCE_DDS_` | `UXRCE_DDS_` |
| module class name | `MicroddsClient` | **`UxrceddsClient`** |
|`init.d/rcS` whenever the module is mentioned | `microdds` | **`uxrce_dds`** |
| main doc page name | XRCE-DDS (PX4-FastDDS Bridge) | **uXRCE-DDS (PX4-micro XRCE-DDS Bridge)**|
| environment variable to have custom namespace in simulation | PX4_MICRODDS_NS | **PX4_UXRCE_DDS_NS** |
Signed-off-by: Beniamino Pozzan <beniamino.pozzan@phd.unipd.it>
2023-05-03 11:51:53 -07:00
82fd2987c9
fw pos control: revert name until we delineate this module a bit more ( #21442 )
2023-04-13 17:00:04 +02:00
ea97a38b2b
Initial Cannode PWM Support ( #19748 )
...
* Add uavcannode esc/servo pwm control pipeline
* Remove cannode rc.interface with mixer purge
* Cannode add Kconfig options to reduce flash usage
2023-03-15 11:20:07 -04:00
3e200bca0d
fw_pos_control_l1: renaming to fw_path_navigation, l1 control is not used anymore, use a more generic naming.
2023-02-09 17:51:55 +01:00
3822ef1519
boards: update all in tree bootloaders
2023-01-19 17:25:39 -05:00
45912066d2
fix copyright header year range
2023-01-14 09:16:16 -05:00
635daeed8a
NuttX push jlink-nuttx into cmake and enable CONFIG_DEBUG_TCBINFO by default
2023-01-12 09:05:26 -05:00
e6c4416250
update all px4board kconfig
2023-01-07 21:53:01 -05:00
dc5ce9b0ce
boards: NuttX increase default CONFIG_ARCH_INTERRUPTSTACK 512->768 bytes
...
- during casual testing on default configs the stack was penetration was reaching ~90% which is a bit too close for comfort
- increasing by 50% to be conservative
2023-01-07 12:07:35 -05:00
21e88f64b4
Add new fixed wing rate control module (fw_rate_control)
...
* Fixedwing rate control into a separate module
* Start fw_rate_control for vtol
* Move over airspeed related parameters to fw_rate_control
Co-authored-by: Silvan Fuhrer <silvan@auterion.com>
2023-01-04 11:14:00 -05:00
40e3503c39
boards: fix all NuttX configs (CONFIG_SMALL NuttX upgrade migration)
2022-12-29 12:50:37 -05:00
0fbb6db6d4
boards: update all NuttX defconfig (make all_olddefconfig)
2022-12-29 12:50:37 -05:00
c2f15f5957
boards: update all px4boards (make all_px4_savedefconfig)
2022-12-29 12:50:37 -05:00
41fa53605c
boards: rebuild STM32H7 bootloaders and px4-io-v2
2022-12-09 11:02:21 -05:00
2cb4ef0629
NuttX 10.3+ upgrade ( #20190 )
...
Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com>
Co-authored-by: David Sidrane <David.Sidrane@NscDg.com>
Co-authored-by: alexklimaj <alex@arkelectron.com>
2022-11-20 20:28:07 -05:00
cea185268e
msg ROS2 compatibility, microdds_client improvements (timesync, reduced code size, added topics, etc), fastrtps purge
...
- update all msgs to be directly compatible with ROS2
- microdds_client improvements
- timesync
- reduced code size
- add to most default builds if we can afford it
- lots of other little changes
- purge fastrtps (I tried to save this multiple times, but kept hitting roadblocks)
2022-10-19 19:36:47 -04:00
b09329f287
boards/matek/h743: add fix to resolve no startup of imu for matek_h743 target ( #20184 )
...
* Add fix for matek_h743 target that resolves no startup of imu for h743-wing v3 and h743-wlite boards
* Added imu driver according to spi bus (https://www.mateksys.com/?portfolio=h743-wing-v2#tab-id-7 )
2022-09-09 13:02:38 -04:00
d3312f955f
delete systemcmds/pwm
2022-09-09 09:14:09 -04:00
5dd1e5a018
delete systemcmds/mixer
2022-09-09 09:14:09 -04:00
f929017618
boards: link missing arch_io_pins lib
2022-07-31 11:19:20 -04:00
4cc3e78558
Add mag bias estimator to CAN GPS units with IMUs
...
- run `sensors` hub to process sensor_mag and publish vehicle_magnetometer
- update uavcannode to use vehicle_magnetometer
2022-06-19 15:46:36 -04:00
5b6e5a0968
boards: NuttX update all boards to preallocated sem holder list
...
- CONFIG_SEM_PREALLOCHOLDERS=32
- CONFIG_SEM_NNESTPRIO=16 (default)
2022-05-31 01:41:07 -07:00
479b52fd02
Update all H7 Bootloders
2022-05-27 14:25:25 -04:00
fd81951391
boards: STM32H7 pad to 256 bit - 32 bytes ( #19724 )
2022-05-27 14:04:51 -04:00
3fe4c6e3f5
boards: matek h743-mini specify drivers to still fit to flash
...
- the code has become a bit bigger again that now the drivers have to be specified a bit more precisely to still fit into the flash.
2022-05-13 14:05:04 -04:00
6d390f393c
boards: matek_h743-mini_bootloader fix NuttX CONFIG_ARCH_BOARD_CUSTOM_DIR
2022-05-10 11:28:26 -04:00
5778553508
boards: matek_h743_bootloader fix NuttX CONFIG_ARCH_BOARD_CUSTOM_DIR
2022-05-10 11:26:15 -04:00
9c12c2a152
boards: matek h743 update unified target
2022-05-06 14:57:37 -04:00
76cf4332d9
boards: matek_h743-mini sync all Matek H743 boards
2022-05-06 14:56:20 -04:00
a71cf21c28
boards: matek_h743-slim_default try to fit as many modules of all categories as possible into the flash.
2022-05-06 10:13:30 -04:00
87ebf17ab0
boards: matek h743 enable 12 pwm outs on slim and wing V1.0 and V1.5
2022-05-06 10:10:59 -04:00
fc887a23af
boards: matek h743 mini
2022-05-06 10:09:14 -04:00
bf8d759d3d
boards: matek h743 slim support v1 and v1.5 IMU variants
...
- remove temp compensation to still fit into flash
2022-05-04 14:05:16 -04:00
7bb789cb23
boards: update bootloaders to latest
2022-04-25 22:39:25 -04:00
777540bd02
boards/matek/gnss-m9n-f4: RM3100 orientation fix
...
- the RM3100 needs to be pitched 180º for correction orientation on this board.
2022-04-09 14:22:21 -04:00
c585758f67
boards/matek/gnss-m9n-f4: IMU orientation update
...
- the icm20602 needs to be rolled 180º and yaw 90º for this board.
2022-04-09 14:21:45 -04:00
f31f3370ef
Add support for Timer15 on H743 boards ( #19228 )
...
* Adds Timer15 to stm32_common, if the timer base is defined
* Adds Timer15 logic for DMA and AltFunc config on stm32h7 boards
* Adds TIM15 BDTR->MOE support in stm32_common timer init
* Adds support for TIM15 pwm channels on Matek H743 Slim
2022-02-21 16:52:38 -05:00
abfa3d23a5
boards: matek h743-slim fix STM32_SDMMC_SDXFR_CLKDIV typo
2022-02-16 10:28:01 -05:00
f9feb04f8b
Changes SDIO clock speed to 20MHz for the Matek H743 slim
...
Signed-off-by: Charles Cross <charles@missionrobotics.us>
2022-02-15 09:38:09 -08:00
fd1aa3cfb9
matek_gnss-m9n-f4:Use CONFIG_BOARD_SERIAL_GPSn for serial_passthru
2022-02-09 13:11:52 -05:00
0c936e4fd2
serial_passthru:Move CONFIG_xxx to serial_passthru
2022-02-09 13:11:52 -05:00
f4d02a2937
MatekH743 board_id, usb vid/pid changes, and MPU6000 delay before transfer - not after ( #18733 )
...
* Make board_id compatible with ardupilot
* Initialize outputs for CAM1/CAM2 and Vsw pad
* Correct board type 1013 in bootloader to match AP
* Change usb vendor string to "Matek"
* Change cdcacm pid to 1013
* Comment out FLASH_BASED_PARAMS because of #15331
2022-02-07 19:55:49 -05:00
490a0c473b
Rename vmount to gimbal
2022-02-07 19:21:15 -05:00
ec441fdba6
gnss-m9n-f4:Add serial_passthru
2022-02-01 21:49:29 -05:00
0c8a5b3da1
matek-gnss-m9n-f4:Enable IO compensation
2022-02-01 21:49:29 -05:00
cb06f82f0f
gnss-m9n-f4:Board support clean up
...
SD is on SPI3 - correct pin mapping
Fix DMA Mapping for all SPI and RX DMA on U[S]ART RX
Fix Memory MAP SRAM size
Removed unused GPIO
Used proper I2C definitions
Ensure Watchdog is configured for debugging
Fixed FLASH param definitions
Removed unedded SPI init
matek_gnss-m9n-f4:Correct Board ID and Size
Build order SJF
Added Support for F40x
2022-02-01 21:49:29 -05:00
d92244b664
Initial Matek m9nf4 can node support
...
Signed-off-by: dirksavage88 <dirksavage88@gmail.com>
Added uavcan board identity
Signed-off-by: dirksavage88 <dirksavage88@gmail.com>
Added usb.c, LED rework may be needed
Signed-off-by: dirksavage88 <dirksavage88@gmail.com>
PX4 dates added to all files
Signed-off-by: dirksavage88 <dirksavage88@gmail.com>
Matek M9NF4 CAN Node initial board support
Signed-off-by: dirksavage88 <dirksavage88@gmail.com>
Changed GPS to ttyS3 in board sensors, led board on/off definitions
Signed-off-by: dirksavage88 <dirksavage88@gmail.com>
Added app descriptor section to canbootloader linker script
Signed-off-by: dirksavage88 <dirksavage88@gmail.com>
Changed board naming convention to match vendor
Signed-off-by: dirksavage88 <dirksavage88@gmail.com>
Changed canbootloader and nsh menuconfig
Signed-off-by: dirksavage88 <dirksavage88@gmail.com>
Test defconfig changes, IRQ hardfault in bootloader
Signed-off-by: dirksavage88 <dirksavage88@gmail.com>
Working canbootloader, App firmware stil WIP
Working App firmware: changed romfsroot to 'cannode', TODO: verify GPS & IMU config
Signed-off-by: dirksavage88 <dirksavage88@gmail.com>
TODO: Debug GPS no sats/low sats issue, no magnetometer on some boards
Signed-off-by: dirksavage88 <dirksavage88@gmail.com>
2022-02-01 21:49:29 -05:00
Igor Mišić
alexklimaj
Beat Küng
Beniamino Pozzan
Thomas Stastny
Konrad
Daniel Agar
PX4 BuildBot
JaeyoungLim
matthewoots
David Sidrane
achim
Ryan Johnston
Charles Cross
Viktor Vladic
Julian Oes
dirksavage88