Commit Graph

49 Commits

Author SHA1 Message Date
Daniel Agar 132a07f53c boards: test boards add NuttX ostest and run on Jenkins test rack 2022-05-29 13:41:16 -04:00
Daniel Agar 5b07398b3e Tools/HIL/test_airframes.sh: only attempt setting first 3 MAV_x_CONFIG
- MAV_3_CONFIG doesn't exist
2022-02-07 16:31:27 -05:00
Daniel Agar ece09064c4 parameters: perform verification pass twice
- on NuttX with MTD storage this is to ensure we are verifying what's
actually stored on ramtron or eeprom, not just what's cached by bchlib
2022-01-18 09:47:28 -05:00
Daniel Agar 0b1402afe2 Tools/HIL/test_airframes.sh enable all mavlink and GPS 2022-01-08 18:11:43 -05:00
Daniel Agar 2153710917
Tools/HIL/monitor_firmware_upload.py don't fail on any ERROR
- on first boot we only care that it completes (gets to nsh prompt)
2022-01-02 10:05:30 -05:00
Daniel Agar c421bff73c Tools/HIL: use pyserial spy:// to log all serial traffic and dump on failure 2022-01-01 22:25:29 -05:00
Daniel Agar 501474993e Tools/HIL: default to USB UART if available 2022-01-01 10:49:30 -05:00
Daniel Agar 247b975675 Tools/HIL: disable XON/XOFF, consistent timeouts, proper input buffer clear 2021-12-31 19:28:40 -05:00
Daniel Agar 3514458f42 Tools/HIL/test_airframes.sh: dump all parameter storage after bootup to verify contents 2021-12-30 12:43:00 -05:00
Daniel Agar b06215d038
Tools/HIL/test_airframes.sh: run param dump after save to verify BSON 2021-12-30 11:11:14 -05:00
Daniel Agar 47d6a6c63d Tools/HIL/test_airframes.sh dump parameters before reboot (for verification) 2021-12-23 17:45:50 -05:00
Daniel Agar ad1bfb5410 Tools/HIL/reboot.py retry every 90 seconds for up to 5 minutes 2021-12-12 11:53:01 -05:00
Daniel Agar b71b908ac7 Tools/HIL: explain cmd, use monotonic time 2021-12-11 15:02:49 -05:00
Daniel Agar f9faa97d85 Tools/HIL/run_nsh_cmd.py increase timeout 3->4 minutes 2021-12-06 17:51:03 -05:00
Daniel Agar 585fa12209 Jenkins HIL improve SD testing 2021-11-25 13:11:45 -05:00
Daniel Agar 1b7f4b6003 Jenkins HIL test loading all airframes 2021-11-23 12:38:41 -05:00
Daniel Agar c4de9f67a1 Jenkins: HIL add simple reboot script that fails on any ERROR 2021-11-22 11:27:45 -05:00
Daniel Agar 00b15798da Tools/HIL/run_tests.py - temporarily disable flaky dataman test until it can be reviewed 2021-10-04 12:54:01 -04:00
Daniel Agar e4b0fa25a2 systemcmds/tests: remove px4io conv test 2021-09-25 19:15:05 -04:00
Daniel Agar a92e44c90e Tools/HIL/run_nsh_cmd.py: echo success cmd twice to avoid missing dropouts 2021-09-21 19:13:30 -04:00
Daniel Agar f1d00fe697 Tools/HIL: only print timestamp if newline in output 2021-09-01 15:16:00 -04:00
Daniel Agar 65b1a9648d Tools/HIL/run_nsh_cmd.py: fail if ERROR printed in output 2021-09-01 15:16:00 -04:00
Daniel Agar c6dd03a8aa Tools/HIL/run_nsh_cmd.py - raise timeout slightly
- helps on slower debug builds
2021-09-01 15:16:00 -04:00
Daniel Agar 2864735c44 Tools/HIL/monitor_firmware_upload.py - fail if there's an ERROR during startup 2021-09-01 15:16:00 -04:00
Daniel Agar 1a222bf06e Tools/HIL/run_nsh_cmd.py handle missing echo, but cmd succeeded 2021-07-19 11:53:54 -04:00
Daniel Agar 774ad80ba0 systemcmds/tests: split out microbenchmarks and remove obsolete tests
- reorganize Jenkins HIL tests
2021-07-18 18:02:33 -04:00
Daniel Agar 209fde9ff3 Tools/HIL: console print timestamps 2021-07-17 10:57:09 -04:00
Daniel Agar 847b3b5b64 Tools/HIL/nsh_param_set.py bump timeout slightly 2021-07-16 22:18:07 -04:00
Daniel Agar 5a046cae7e Tools/HIL: fix terminal colors (ANSI escape codes) 2021-07-16 21:37:48 -04:00
Daniel Agar 8c6ade0fc8 Tools/HIL: color output (ERROR, WARN, etc) 2021-07-16 19:33:27 -04:00
Daniel Agar e61d8d6e7e Tools/HIL: add nsh_param_set.py and use on test rack 2021-07-16 19:33:27 -04:00
Daniel Agar 4a0fa08953 Tools/HIL/run_nsh_cmd.py fail if command failed 2021-07-15 23:29:46 -04:00
Daniel Agar ea902e7f38 systemcmds/tests: split out individual module test commands 2021-03-23 11:39:14 -04:00
Daniel Agar dd3c1a3653 Tools/HIL: relax command retry for now 2020-11-13 18:03:09 -05:00
Daniel Agar 3cf072debc HIL tests remove deleted smoothz test 2020-11-11 20:22:06 -05:00
Daniel Agar 3924792c20
Jenkins: HIL improve run_tests.py and run_nsh_cmd.py helper
- switch to python3
 - run_nsh_cmd.py return error if command fails
 - decrease timeout in checking for output
 - Jenkins hardware tests tolerate certain command failures that aren't available on all boards (flash constrained, etc)
2020-11-10 22:45:50 -05:00
Daniel Agar b491929ad6
Jenkins: HIL tests only finish on PASSED, FAILED, or timeout 2020-11-10 16:41:13 -05:00
Daniel Agar faccb0d948
Jenkins: HIL script minor improvements
- periodically send newline while checking for output or command completion (back to nsh prompt)
 - mtd test
 - fix adc test (now board_adc)
2020-09-28 16:41:28 -04:00
Daniel Agar 6bdcca6a85 systemcmds/tests: add simple atomic microbenchmark 2020-07-10 10:59:50 -04:00
Daniel Agar 32887193d6
systemcmds/tests: remove autodeclination test (moving to PX4/ecl) 2020-06-23 10:34:25 -04:00
Daniel Agar e6ab5fc2a8 HIL test runner temporarily disable uORB test and fix typo 2020-02-28 10:03:39 +01:00
BazookaJoe1900 27471d90ca
Jenkins: hardware test exit from failed hardware check with error, so the check will fail 2020-02-25 09:58:02 +01:00
Matthias Grob d60e1e2774 ControlMath: switch to gtest for unit tessting 2019-10-23 17:33:47 +02:00
Daniel Agar d1298f2c37 Jenkins HITL exit upload monitor on nsh> 2019-06-29 17:18:22 -04:00
Daniel Agar 5f20d3cf3b Jenkins HIL increase boot timeout for stackcheck build
- px4_fmu-v5_stackcheck remove extra drivers (to try and get the system
usuable)
2019-06-15 16:59:04 -04:00
Daniel Agar e6799e90ad Jenkins HIL disable buzzer and remove redundant px4_fmu-v5 test 2019-06-15 15:06:02 -04:00
Daniel Agar 81c914a092 Jenkins HIL test run various commands to inspect system 2019-06-15 14:29:00 -04:00
Daniel Agar d30e30a2a6 Jenkins HIL run more tests 2019-06-15 11:31:01 -04:00
Daniel Agar 01744a9efc Jenkins px4fmu-v2 hardware test 2018-08-14 23:12:26 -04:00