dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity
41,946 Commits 514 Branches 136 Tags 234 MiB
Commit Graph

41946 Commits

Author SHA1 Message Date
Silvan Fuhrer 06f4195663 PositionControllerStatus.msg: add comments 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2023-01-26 17:04:43 +01:00
Silvan Fuhrer fc1c5da92c tecs_status.msg: add comments to states 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2023-01-26 17:04:43 +01:00
Silvan Fuhrer 5099a91f87 TECS: keep _pitch_integ_state in radians 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2023-01-26 17:04:43 +01:00
Silvan Fuhrer e16f98c2b6 FW Position controller: remove unused climbout arguments 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2023-01-26 17:04:43 +01:00
Eric Katzfey aae431e4d5
Removed unused variables in LED driver that were causing fatal build errors on Qurt platform (#21007) 2023-01-25 16:35:56 -08:00
PX4 BuildBot d6d41af9a4 Update submodule nuttx to latest Wed Jan 25 12:38:18 UTC 2023 
- nuttx in PX4/Firmware (d3b7112dd9): f80785664f
    - nuttx current upstream: 35997053c5
    - Changes: f80785664f...35997053c5

    35997053c5 2023-01-23 David Sidrane - [BACKPORT] s32k1xx:serial Do not use TC use TDRE & TIE
 2023-01-25 14:48:22 -05:00
PX4 BuildBot cc5509381a boards: update all NuttX defconfigs 2023-01-25 14:47:48 -05:00
PX4 BuildBot 03f681ebf8 update all px4board kconfig 2023-01-25 12:57:17 -05:00
Silvan Fuhrer a210c96aa9 Commander: ssimplify error messages for LOITER rejection 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2023-01-25 16:40:27 +01:00
Silvan Fuhrer 148ffe4e25 add support for DO_CHANGE_ALTITUDE 
Do the same as DO_REPOSITION wit only the altitude field populated
and MAV_DO_REPOSITION_FLAGS set, which means:
- switch to Loiter mode if not already in it
- set the current altitude to what is specified in the altitdue field,
keep current altitude setpoint otherwise
- keep current position setpoint
- fall back to current estimated position in case a position setpoint
is not finite

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2023-01-25 16:40:27 +01:00
Daniel Agar 0bdec5bcc0 cmake: nuttx fix jlink-nuttx dependency 2023-01-25 09:06:35 -05:00
KonradRudin d3b7112dd9
[TECS]: If in airspeedless mode, add the throttle integrator term to the throttle setpoint, if the integrator term is positive. This should avoid reducing airspeed when switching to airspeedless mode. (#20987) 2023-01-25 09:16:11 +01:00
modaltb 20b7a8c9f6
drivers/actuators/modalai_esc --> modal_io and rename UART_ESC prefix to MODAL_IO (#20995) 2023-01-24 20:24:58 -05:00
Benjamin Perseghetti 60de5b3ea4
simulation/gz_bridge: remove proceeding px4_ from servos in gazebo model (#20998) 
Signed-off-by: Benjamin Perseghetti <bperseghetti@rudislabs.com>
 2023-01-24 19:56:11 -05:00
Benjamin Perseghetti 684b4a4b8a
simulation/gz_bridge: rc_cessna plane model working, Gazebo Garden updates, and prepare for proper airspeed (#20989) 
Co-authored-by: Benjamin Perseghetti <bperseghetti@rudislabs.com>
Co-authored-by: Alejandro Hernández Cordero <ahcorde@gmail.com>
 2023-01-24 19:01:45 -05:00
modaltb fbd2e111d0
boards/modalai/fc-v1: revert DMA changes on FCv1 for now (from #20956) 2023-01-24 14:50:05 -05:00
alexklimaj 0776c47d88 Enable ARK CANnode pwm outputs 7 and 8 2023-01-24 14:49:21 -05:00
alexklimaj ac7dc030c3 Add ARK CANnode ver command 2023-01-24 14:49:21 -05:00
Daniel Agar 64c2ec5eea
simulation/gz_bridge: remove cmake CONFIGURE_DEPENDS 
- PX4 build system simulation targets are optional and no longer
strictly required
 2023-01-24 13:58:30 -05:00
Daniel Agar 9cb6de8010
simulation: relax jmavsim java requirements (finding vecmath.jar) 2023-01-24 13:56:24 -05:00
Daniel Agar 3b543c7700
mavlink: serialize mavlink generation to prevent broken output 
- let uAvionix generation fully complete before generating CONFIG_MAVLINK_DIALECT
 2023-01-24 13:49:28 -05:00
JaeyoungLim 644aeb9153
support fixed-wing in new Gazebo (gz or ignition gazebo) (#20939) 
* Add gz plane airframe config

Co-authored-by: Alejandro Hernández Cordero <ahcorde@gmail.com>
Co-authored-by: Benjamin Perseghetti <bperseghetti@rudislabs.com>
 2023-01-24 09:22:53 -05:00
Jiangxuan Chen c31867f104
support for KakuteH7v2, KakuteH7mini, and BMI270 IMU driver (#20545) 
Signed-off-by: Julian Oes <julian@oes.ch>
 2023-01-22 19:41:39 -05:00
Daniel Agar 7c9dcd1985
drivers/uavcan: silence noisy libuavcan cmake version deprecation warning for now 
- keep drivers/uavcannode cmake in sync with drivers/uavcan
 2023-01-22 14:48:43 -05:00
Daniel Agar 1b46028fd3 mavlink: generate mavlink quiet by default (stdout redirected to log file) 2023-01-22 14:45:41 -05:00
bresch 6e30f8f5cb ekf2: use dedicated aid_src message for flow for terrain aiding 2023-01-21 15:31:19 -05:00
bresch b4b48cae75 ekf2: terrain flow - migrate to Symforce 2023-01-21 15:31:19 -05:00
Daniel Agar 3f842f01a0
simulator/gz_bridge: split actuator outputs for ESCs and servos (#20979) 
- existing SIM_GZ outputs -> SIM_GZ_EC (ESCs)
 - new SIM_GZ_SV for servos (not fully implemented)
 2023-01-21 14:44:09 -05:00
berkercanatar 9ac6b3d3c5 Update current year in LICENSE 
Update year to match with the current year 2023 in LICENSE file.
 2023-01-21 12:57:27 -05:00
modaltb c0e8508b01
actuators/modalai_esc/modalai_esc: fix ESC ID to Motor remap regression (#20977) 2023-01-21 12:57:02 -05:00
Daniel Agar a93ef657d1
HIL/test_airframes.sh allow 'gps' and 'mavlink' status to fail 
- we're only looking for debug info if/when things go wrong later
 2023-01-21 11:38:39 -05:00
Daniel Agar fb000e874f
boards: px4_fmu-v5_debug quiet RTC debug errors 
- test rack CUAV v5 plus is producing false positives (in this particular situation) that are failing the overall testing
 2023-01-21 11:14:28 -05:00
Daniel Agar 6b13fb8b86
HIL/test_airframes.sh check mavlink and gps status before stopping all 
- occasionally these fail on the test rack (cube orange), so try to
gather more information
 2023-01-21 11:06:23 -05:00
FriedrichTuttas 1830195d30
boards: px4_fmu-v6x add pulldowns to GPIO pins UART7 RTS and UART7 CTS (#20974) 
- https://github.com/PX4/PX4-Autopilot/issues/20762

Co-authored-by: David Sidrane <David.Sidrane@Nscdg.com>
 2023-01-21 10:19:57 -05:00
Daniel Agar 1aa8ec4537
drivers: initial VectorNav (VN-100, VN-200, VN-300) support 2023-01-20 19:09:30 -05:00
Daniel Agar bd9d09663f
commander: avoid uint64 timestamp implicit float conversions 
- 64 bit time in microseconds stored in a 32 bit float quickly becomes problematic
 - fixes https://github.com/PX4/PX4-Autopilot/issues/20944
 2023-01-19 17:48:40 -05:00
Daniel Agar 3822ef1519 boards: update all in tree bootloaders 2023-01-19 17:25:39 -05:00
PX4 BuildBot c4127813b3 Update submodule sitl_gazebo-classic to latest Thu Jan 19 12:38:59 UTC 2023 
- sitl_gazebo-classic in PX4/Firmware (f3cdf70732): 1a725dd858
    - sitl_gazebo-classic current upstream: 9343aaf4e2
    - Changes: 1a725dd858...9343aaf4e2

    9343aaf 2023-01-15 JaeyoungLim - Fix model prefix for user camera plugin (#948)
e5836d3 2023-01-13 Simone - Added robot namespace to the model (#941)
 2023-01-19 12:33:53 -05:00
PX4 BuildBot d2240c0c48 Update submodule nuttx to latest Thu Jan 19 12:39:05 UTC 2023 
- nuttx in PX4/Firmware (0e2eed62f9a9b44cefc9765fd21aac1a368e4314): d43edd7879
    - nuttx current upstream: f80785664f
    - Changes: d43edd7879...f80785664f

    f80785664f 2023-01-16 Julian Oes - [FIX] Add missing define condition
1751c2c7cb 2023-01-16 Julian Oes - [BACKPORT] stm32h7: add SMPS PWR option for STM32H7X7
 2023-01-19 12:33:27 -05:00
PX4 BuildBot 8d6a336b2c boards: update all NuttX defconfigs 2023-01-19 12:32:57 -05:00
PX4 BuildBot 898dbb96b4 update all px4board kconfig 2023-01-19 12:32:09 -05:00
Silvan Fuhrer f3cdf70732 VTOL: Quad-chute: rework loss of altitude condition 
Previously the condition was based on hard coded height rate estimate and
setpoint values and an altitude error threshold. That showed to be leading
to false positives when the vehicle doesn't tightly follow the altitdue
ramp given by TECS to achieve a new altitude setpoint, and has become
completely infeasibly with the latest TECS rework that leads to non-ramped
altitude setpoint changes in the tecs_status message.
The new check no longer checks the altitude error but only the height rate
instead. It begins to integrate the height rate error once it detects an
uncommanded descend condition (height rate negative while setpoint is
positive). Integral threshold can be tuned by user (VT_QC_HR_ERROR_I).

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2023-01-19 09:36:09 +01:00
Silvan Fuhrer 36dc75bedf VTOL: introduce new quad-chute check for altitude loss during front transition 
By default the threshold is set to 10m.

Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2023-01-19 09:36:09 +01:00
Beat Küng 98705ced2f lightware_laser_i2c: fix unreliable startup detection 
In rare occasions asking for the protocol values after setting it returned
[0, 0]. I did not see any documentation for having to wait, but adding a
short wait period fixes it.
 2023-01-18 23:02:56 -05:00
modaltb 05d828642d
boards/modalai: FCv1 DMA optimiziation for 2Mbit UART (#20956) 
- disable unused SPI3 DMA
- enable USART2 RX/TX, UART5/6 TX, UART4 RX
 2023-01-18 23:01:57 -05:00
Daniel Agar 9d7c4b8273
boards: ark_can-flow_default disable sensors/vehicle_acceleration to save flash 2023-01-18 22:58:19 -05:00
Daniel Agar ffa9d61065
boards: px4_sitl_default include gz_bridge by default 2023-01-18 22:56:17 -05:00
Daniel Agar 2b5722786b cmake: fix and update packaging 2023-01-18 22:51:12 -05:00
alexklimaj 5eb13e4448 ARKV6X bootloader init all pwm outputs as input pulldown 2023-01-18 21:52:11 -05:00
alexklimaj 7c2da8d1ef Enable ARKV6X SPIX SYNC, enable icm426889 and iim42652 CLKIN 2023-01-18 21:52:11 -05:00