543454f12e
stm32h7:ADC STM32_RCC_D3CCIPR_ADCSEL->STM32_RCC_D3CCIPR_ADCSRC
2024-01-30 18:07:57 -05:00
ef20708a98
kakuteh7/7mini/h7v2: Add ICM42686p as alternative
...
This adds the ICM42686p as a possible alternative to the existing IMUs.
Apparently, the ICM20689 was never actually used in these boards.
Signed-off-by: Julian Oes <julian@oes.ch>
2023-11-27 21:31:46 -05:00
19b681ca1f
Remove SYS_USE_IO param
...
The param is not really required anymore with the actuator
configuration. Also, when it is set to 0, RC doesn't work for some
boards which would be nice to avoid.
Signed-off-by: Julian Oes <julian@oes.ch>
2023-11-10 12:17:23 +13:00
563fd8427a
boards: increase init stack size by 100B
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2023-10-02 09:37:06 +02:00
c1dbe177b8
boards: move FRAM emulated sector size to the 32-byte granularity ( #21204 )
2023-09-20 16:50:36 -04:00
7589ee00e8
boards: holybro kakutef7 switch to ekf2
2023-09-15 10:02:09 -04:00
3d61ab84c4
Cannode add ability to get node ID after boot. Fix ARK CAN OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO_INVERT
2023-08-30 11:40:01 -04:00
ecbc5b83a0
kakute: disable some EKF2 features
...
To save flash.
Signed-off-by: Julian Oes <julian@oes.ch>
2023-08-28 13:20:00 +02:00
9d97c7c5cb
kakuteh7: use EKF2 by default
...
Signed-off-by: Julian Oes <julian@oes.ch>
2023-08-28 13:20:00 +02:00
ae70f9c640
attitude_estimator_q: disable ATT_ACC_COMP by default
...
Improves tracking in the CI test, and I always disabled it on my vehicles
as well.
2023-08-08 12:28:52 -04:00
70826c5af4
update all px4board kconfig
2023-07-18 14:28:21 -04:00
abe0ca1307
boards/holybro/kakutef7: enable gps, osd, top, dmesg. Disable uxrce_dds
2023-07-03 11:22:33 +02:00
f5193bb155
boards/holybro/kakutef7: enable rc serial singlewire
2023-07-03 11:22:33 +02:00
2307d4aa22
boards/holybro/kakutef7: remove px4_platform_config
...
kakutef7 doesn't use manifest
2023-07-03 11:22:33 +02:00
c95539e8ce
boards: increase init stack size by 150B
...
External airframes need a bit more stack due to nested configs.
2023-06-09 21:11:11 -04:00
9e5420bbbd
microdds_client: rename to uxrce_dds_client
...
| | old version | new version (second proposal) |
|-|-|-|
| module name | `microdds_client` | **`uxrce_dds_client`** |
| strings / comments about the module | non consistent | **UXRCE-DDS Client** |
| menuconfig option | `MODULES_MICRODDS_CLIENT` | **`MODULES_UXRCE_DDS_CLIENT`** |
| module parameters group name | `Micro XRCE-DDS` | **UXRCE-DDS Client** |
| module parameters name prefix | `XRCE_DDS_` | `UXRCE_DDS_` |
| module class name | `MicroddsClient` | **`UxrceddsClient`** |
|`init.d/rcS` whenever the module is mentioned | `microdds` | **`uxrce_dds`** |
| main doc page name | XRCE-DDS (PX4-FastDDS Bridge) | **uXRCE-DDS (PX4-micro XRCE-DDS Bridge)**|
| environment variable to have custom namespace in simulation | PX4_MICRODDS_NS | **PX4_UXRCE_DDS_NS** |
Signed-off-by: Beniamino Pozzan <beniamino.pozzan@phd.unipd.it>
2023-05-03 11:51:53 -07:00
09d86085bd
kakute f7/h7/h7mini/h7v2: enable airspeed
...
Without this airspeed sensors are not working which is not intuitive.
Signed-off-by: Julian Oes <julian@oes.ch>
2023-04-18 07:45:52 +02:00
82fd2987c9
fw pos control: revert name until we delineate this module a bit more ( #21442 )
2023-04-13 17:00:04 +02:00
efab9be488
update all px4board kconfig
2023-03-24 10:01:58 -04:00
6ec2b902cc
ROMFS: only copy bootloader binary if systemcmds/bl_update included
2023-03-16 09:43:56 -04:00
ea97a38b2b
Initial Cannode PWM Support ( #19748 )
...
* Add uavcannode esc/servo pwm control pipeline
* Remove cannode rc.interface with mixer purge
* Cannode add Kconfig options to reduce flash usage
2023-03-15 11:20:07 -04:00
ea20217c1b
kakuteh7v2/mini: EKF2 is already the default
2023-03-08 10:48:31 -05:00
593b3d250d
kakuteh7mini: remove duplicate param defaults
...
Signed-off-by: Julian Oes <julian@oes.ch>
2023-03-08 10:48:31 -05:00
ed49ed3903
kakuteh7v2/mini: use EKF2 without mag by default
...
This switches from attitude_estimator_q to EKF2 which should now work
without mag when the params are set to SYS_HAS_MAG = 0 and
EKF2_IMU_CTRL = 7 to enable gravity fusion.
Signed-off-by: Julian Oes <julian@oes.ch>
2023-03-08 10:48:31 -05:00
d69d99b191
kakuteh7v2/mini: switch on VTX+
...
This just always switches the VTX+ power on.
Signed-off-by: Julian Oes <julian@oes.ch>
2023-02-13 22:00:49 -05:00
3e200bca0d
fw_pos_control_l1: renaming to fw_path_navigation, l1 control is not used anymore, use a more generic naming.
2023-02-09 17:51:55 +01:00
cc5509381a
boards: update all NuttX defconfigs
2023-01-25 14:47:48 -05:00
03f681ebf8
update all px4board kconfig
2023-01-25 12:57:17 -05:00
c31867f104
support for KakuteH7v2, KakuteH7mini, and BMI270 IMU driver ( #20545 )
...
Signed-off-by: Julian Oes <julian@oes.ch>
2023-01-22 19:41:39 -05:00
3822ef1519
boards: update all in tree bootloaders
2023-01-19 17:25:39 -05:00
45912066d2
fix copyright header year range
2023-01-14 09:16:16 -05:00
635daeed8a
NuttX push jlink-nuttx into cmake and enable CONFIG_DEBUG_TCBINFO by default
2023-01-12 09:05:26 -05:00
e6c4416250
update all px4board kconfig
2023-01-07 21:53:01 -05:00
dc5ce9b0ce
boards: NuttX increase default CONFIG_ARCH_INTERRUPTSTACK 512->768 bytes
...
- during casual testing on default configs the stack was penetration was reaching ~90% which is a bit too close for comfort
- increasing by 50% to be conservative
2023-01-07 12:07:35 -05:00
21e88f64b4
Add new fixed wing rate control module (fw_rate_control)
...
* Fixedwing rate control into a separate module
* Start fw_rate_control for vtol
* Move over airspeed related parameters to fw_rate_control
Co-authored-by: Silvan Fuhrer <silvan@auterion.com>
2023-01-04 11:14:00 -05:00
40e3503c39
boards: fix all NuttX configs (CONFIG_SMALL NuttX upgrade migration)
2022-12-29 12:50:37 -05:00
0fbb6db6d4
boards: update all NuttX defconfig (make all_olddefconfig)
2022-12-29 12:50:37 -05:00
c2f15f5957
boards: update all px4boards (make all_px4_savedefconfig)
2022-12-29 12:50:37 -05:00
f2cd7667dc
systemcmds/bsondump: new command line utility (extracted from parameters)
2022-12-21 10:14:00 -05:00
41fa53605c
boards: rebuild STM32H7 bootloaders and px4-io-v2
2022-12-09 11:02:21 -05:00
9faa8e23e8
NuttX Upgrade CONFIG_LIB_BOARDCTL->CONFIG_BOARDCTL
2022-11-22 14:30:08 -05:00
2cb4ef0629
NuttX 10.3+ upgrade ( #20190 )
...
Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com>
Co-authored-by: David Sidrane <David.Sidrane@NscDg.com>
Co-authored-by: alexklimaj <alex@arkelectron.com>
2022-11-20 20:28:07 -05:00
cea185268e
msg ROS2 compatibility, microdds_client improvements (timesync, reduced code size, added topics, etc), fastrtps purge
...
- update all msgs to be directly compatible with ROS2
- microdds_client improvements
- timesync
- reduced code size
- add to most default builds if we can afford it
- lots of other little changes
- purge fastrtps (I tried to save this multiple times, but kept hitting roadblocks)
2022-10-19 19:36:47 -04:00
8f25acd428
sih remove gps and use standalone sensor_gps_sim
2022-09-09 18:00:50 -04:00
bfe0d71a21
sih remove baro and use standalone sensor_baro_sim
2022-09-09 18:00:50 -04:00
c5336abba2
sih remove mag and use standalone sensor_mag_sim
2022-09-09 18:00:50 -04:00
bcdd2203d3
delete systemcmds/motor_test and msg/test_motor.msg
2022-09-09 09:14:09 -04:00
d3312f955f
delete systemcmds/pwm
2022-09-09 09:14:09 -04:00
5dd1e5a018
delete systemcmds/mixer
2022-09-09 09:14:09 -04:00
cac9c51ac8
ROMFS: purge old mixing system
...
- SYS_USE_IO is now off by default (enabled by default per board)
2022-09-09 09:14:09 -04:00
David Sidrane
Julian Oes
Silvan Fuhrer
Igor Mišić
Daniel Agar
alexklimaj
Beat Küng
PX4 BuildBot
Beniamino Pozzan
Thomas Stastny
Konrad
Jiangxuan Chen
JaeyoungLim