4a553938fb
VOXL2: HRT updates for synchronization with Qurt time ( #22881 )
...
- Added offset to Posix hrt time to account for synchronization with Qurt hrt time
- Added new Kconfig to configure synchronization of HRT timestamps on VOXL2
- Moved voxl2 libfc sensor library submodule from muorb module to boards directory
- Added check to make sure hrt_elapsed_time can never be negative
2024-03-22 15:24:51 -04:00
69028f37a9
New platform independent Serial interface ( #21723 )
2024-03-21 21:00:23 -04:00
ae947513d7
add load_mon support for Qurt platform ( #22883 )
...
- Added check in commander to see if CPU load monitoring has been disabled before signalling overload
2024-03-13 21:33:58 -04:00
18d53c3bfd
boards/modalai/voxl2: Add new capabilities to Qurt platform HITL driver
...
* Added new sensor control options and test capability in dsp_hitl
* HITL working in VIO mode only
* Fixed units on GPS HIL input
2024-03-11 19:47:15 -04:00
f4ebfa6130
parameters: support for an optional remote parameter database ( #22836 )
...
The voxl2 has a split architecture. PX4 runs on a posix platform and a Qurt platform. The two communicate uorb topics back and forth with the muorb module. But each has it's own parameters database and they need to stay in sync with each other. This PR adds support to keep the 2 parameter databases in sync. The main parameters database running on Linux has file system support while the Qurt one does not. The Linux side is considered the primary and the Qurt side is considered the remote.
2024-03-11 13:52:22 -04:00
e20215087f
Moving from Qurt specific icm4266p driver to mainline version
2024-03-07 21:14:49 -05:00
1ec0ba4736
Added param system command to voxl2 slpi build
2024-02-21 11:54:02 -05:00
8da8b88a54
Fixed and added Qurt platform dsp_hitl driver
2024-02-21 11:54:02 -05:00
a436a8f3b8
Fixed unresolved symbol error for qurt platform due to missing sbus library
2024-02-21 11:54:02 -05:00
543454f12e
stm32h7:ADC STM32_RCC_D3CCIPR_ADCSEL->STM32_RCC_D3CCIPR_ADCSRC
2024-01-30 18:07:57 -05:00
6f670cdc0b
update all px4board kconfig
2024-01-24 21:50:11 -05:00
2b69a3d290
VOXL2 specific drivers, modules, and miscellaneous support files ( #22588 )
2024-01-18 12:14:17 -05:00
e8a0a0772e
Disable I2C interface in ICM42688P sensor when it is initialized
...
This prevents accidental misconfiguration via I2C if there are
multiple SPI devices on the same bus. The device may hear it's i2c address
and write some register, while there is data transfer ongoing with another
device.
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
2023-10-17 11:07:21 -04:00
563fd8427a
boards: increase init stack size by 100B
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2023-10-02 09:37:06 +02:00
c1dbe177b8
boards: move FRAM emulated sector size to the 32-byte granularity ( #21204 )
2023-09-20 16:50:36 -04:00
70826c5af4
update all px4board kconfig
2023-07-18 14:28:21 -04:00
c95539e8ce
boards: increase init stack size by 150B
...
External airframes need a bit more stack due to nested configs.
2023-06-09 21:11:11 -04:00
c468266b27
boards: Update modalai fcv2 board support ( #21653 )
...
* Removed obsolete voxl2-io directory
* Updated support for ModalAI FC v2 board
* Added UAVCAN back in and removed local position estimator and attitude estimator Q that are no longer supported.
* Removed unneeded IMU drivers
2023-06-05 12:42:46 -04:00
9e5420bbbd
microdds_client: rename to uxrce_dds_client
...
| | old version | new version (second proposal) |
|-|-|-|
| module name | `microdds_client` | **`uxrce_dds_client`** |
| strings / comments about the module | non consistent | **UXRCE-DDS Client** |
| menuconfig option | `MODULES_MICRODDS_CLIENT` | **`MODULES_UXRCE_DDS_CLIENT`** |
| module parameters group name | `Micro XRCE-DDS` | **UXRCE-DDS Client** |
| module parameters name prefix | `XRCE_DDS_` | `UXRCE_DDS_` |
| module class name | `MicroddsClient` | **`UxrceddsClient`** |
|`init.d/rcS` whenever the module is mentioned | `microdds` | **`uxrce_dds`** |
| main doc page name | XRCE-DDS (PX4-FastDDS Bridge) | **uXRCE-DDS (PX4-micro XRCE-DDS Bridge)**|
| environment variable to have custom namespace in simulation | PX4_MICRODDS_NS | **PX4_UXRCE_DDS_NS** |
Signed-off-by: Beniamino Pozzan <beniamino.pozzan@phd.unipd.it>
2023-05-03 11:51:53 -07:00
b74e929877
update all px4board kconfig
2023-05-01 08:59:08 -04:00
521abecbbf
ekf2: remove all remaining uses of EKF2_AID_MASK
2023-04-28 22:31:17 -04:00
0934d3bf24
VOXL2 snapdragon spektrum rc refactor ( #21427 )
...
* Replaced outdated snapdragon_spektrum_rc and spektrum_rc drivers with VOXL2 board specific spektrum_rc driver
2023-04-19 11:22:43 -04:00
018ca6b49d
VOXL2 board support updates ( #21426 )
2023-04-19 11:21:02 -04:00
82fd2987c9
fw pos control: revert name until we delineate this module a bit more ( #21442 )
2023-04-13 17:00:04 +02:00
efab9be488
update all px4board kconfig
2023-03-24 10:01:58 -04:00
6ec2b902cc
ROMFS: only copy bootloader binary if systemcmds/bl_update included
2023-03-16 09:43:56 -04:00
daa302cdbe
Changes to allow the commander module to be built and run on Qurt ( #21186 )
...
* Changed exclusion to rely on the definition of PX4_STORAGEDIR
2023-03-06 09:49:07 -05:00
3e200bca0d
fw_pos_control_l1: renaming to fw_path_navigation, l1 control is not used anymore, use a more generic naming.
2023-02-09 17:51:55 +01:00
a4aa76f0ac
VOXL2 board updates and new Kconfig option for ROOTFSDIR
...
- also includes a couple of miscellaneous changes to VOXL2 support to show Qurt messages on px4 console and put logs in the proper spot
2023-01-30 12:03:40 -05:00
88038717dc
update all px4board kconfig
2023-01-28 11:39:51 -05:00
e862fde084
ver: use PX4_INFO_RAW and add vendor version ( #21008 )
2023-01-27 07:13:37 +01:00
aae431e4d5
Removed unused variables in LED driver that were causing fatal build errors on Qurt platform ( #21007 )
2023-01-25 16:35:56 -08:00
20b7a8c9f6
drivers/actuators/modalai_esc --> modal_io and rename UART_ESC prefix to MODAL_IO ( #20995 )
2023-01-24 20:24:58 -05:00
fbd2e111d0
boards/modalai/fc-v1: revert DMA changes on FCv1 for now (from #20956 )
2023-01-24 14:50:05 -05:00
3822ef1519
boards: update all in tree bootloaders
2023-01-19 17:25:39 -05:00
05d828642d
boards/modalai: FCv1 DMA optimiziation for 2Mbit UART ( #20956 )
...
- disable unused SPI3 DMA
- enable USART2 RX/TX, UART5/6 TX, UART4 RX
2023-01-18 23:01:57 -05:00
8123090571
boards: modalai FCv2 BSP updates ( #20958 )
...
- FCv2 MR1
- configure TELEM2 for VOXL use case by default
- use ICP201XX baro by default
2023-01-17 21:20:16 -05:00
6f718cd48d
drivers/actuators/modalai_esc: update to use mixer module and control allocator properly
...
- update motor mapping to use new UART_ESC_FUNC* auto generated params
- add support for actuator_test msg to support Actuator Testing in QGC
- modalai_fc-vX targets start driver if configured
- keep track of ESC spin direction in own param
- set ramp up param in MixerOutput to false
2023-01-16 21:46:37 -05:00
30a240a7a4
boards: modalai_fc-v2_default disable examples/fake_gps to save flash
2023-01-14 19:23:19 -05:00
45912066d2
fix copyright header year range
2023-01-14 09:16:16 -05:00
ac80dcd7a8
Voxl2: add qurt i2c driver support and first i2c driver voxlpm
2023-01-13 19:59:41 -05:00
2a315f86ca
Qurt specific drivers for testing and some updates to the startup process ( #20917 )
...
* Added a couple of Qurt specific drivers for testing and some updates to Qurt startup code
2023-01-12 20:17:30 -05:00
635daeed8a
NuttX push jlink-nuttx into cmake and enable CONFIG_DEBUG_TCBINFO by default
2023-01-12 09:05:26 -05:00
89180ac0f9
Fixed Kconfig and px4board files for voxl2
2023-01-11 09:53:18 -05:00
e6c4416250
update all px4board kconfig
2023-01-07 21:53:01 -05:00
dc5ce9b0ce
boards: NuttX increase default CONFIG_ARCH_INTERRUPTSTACK 512->768 bytes
...
- during casual testing on default configs the stack was penetration was reaching ~90% which is a bit too close for comfort
- increasing by 50% to be conservative
2023-01-07 12:07:35 -05:00
21e88f64b4
Add new fixed wing rate control module (fw_rate_control)
...
* Fixedwing rate control into a separate module
* Start fw_rate_control for vtol
* Move over airspeed related parameters to fw_rate_control
Co-authored-by: Silvan Fuhrer <silvan@auterion.com>
2023-01-04 11:14:00 -05:00
40e3503c39
boards: fix all NuttX configs (CONFIG_SMALL NuttX upgrade migration)
2022-12-29 12:50:37 -05:00
0fbb6db6d4
boards: update all NuttX defconfig (make all_olddefconfig)
2022-12-29 12:50:37 -05:00
c3e70b03aa
Add more to Voxl2 build and fix associated build errors ( #20821 )
...
- Do not pull in PWM parameters when DISABLE_PARAMS_MODULE_SCOPING is TRUE since VOXL2 has no PWM nor any of the required timer_config files that go along with that
- Replace non-standard M_PI constants with PX4 defined M_PI_F constants
- Include missing header file for function hrt_absolute_time declaration
- Add new PX4_SOC_ARCH_ID for the VOXL2 board
2022-12-22 15:44:19 -05:00
Eric Katzfey
Eric Katzfey
David Sidrane
PX4 BuildBot
Jukka Laitinen
Silvan Fuhrer
Igor Mišić
Beat Küng
Beniamino Pozzan
bresch
Thomas Stastny
Daniel Agar
Konrad
modaltb
JaeyoungLim