dark0707
/
px4-firmware
forked from Archive/PX4-Autopilot
1
0
Fork 0
Code Pull Requests Activity
42,871 Commits 514 Branches 136 Tags 234 MiB
Commit Graph

107 Commits

Author SHA1 Message Date
Silvan Fuhrer 563fd8427a boards: increase init stack size by 100B 
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
 2023-10-02 09:37:06 +02:00
Igor Mišić c1dbe177b8
boards: move FRAM emulated sector size to the 32-byte granularity (#21204) 2023-09-20 16:50:36 -04:00
alexklimaj 10ac10cb33 ARK CANnode disable OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO 2023-09-05 13:10:23 -04:00
alexklimaj 3d61ab84c4 Cannode add ability to get node ID after boot. Fix ARK CAN OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO_INVERT 2023-08-30 11:40:01 -04:00
alexklimaj 6faec7ab15 ARKV6X update rev 2 heater default temp id 2023-08-24 13:23:47 -04:00
Alex Klimaj 0914e7feaa
new TDK IIM42653 IMU driver and ARKV6X Rev 2 2023-08-16 16:20:14 -04:00
alexklimaj 5f9443add4 ARK Jetson Carrier support 3rd power module 2023-08-14 10:41:44 -04:00
alexklimaj 7db667558e ARK RTK GPS support baro on I2C bus 1 instead of 2 2023-08-03 20:48:01 -04:00
PX4 BuildBot db591f25a6 boards: update all NuttX defconfigs 2023-07-18 14:27:37 -04:00
alexklimaj 51a4eafe0c ARKV6X sync with FMUV6X 2023-06-09 21:17:12 -04:00
Beat Küng c95539e8ce boards: increase init stack size by 150B 
External airframes need a bit more stack due to nested configs.
 2023-06-09 21:11:11 -04:00
alexklimaj 70178b66d8 Cannode add OSD drivers 2023-05-29 14:07:38 +02:00
alexklimaj 2cef8a03d4 ARKV6X add ADIS16507 2023-05-06 17:11:42 -04:00
Beniamino Pozzan 9e5420bbbd microdds_client: rename to uxrce_dds_client 
| | old version | new version (second proposal) |
|-|-|-|
| module name | `microdds_client` | **`uxrce_dds_client`** |
| strings / comments about the module | non consistent | **UXRCE-DDS Client** |
| menuconfig option | `MODULES_MICRODDS_CLIENT` | **`MODULES_UXRCE_DDS_CLIENT`** |
| module parameters group name | `Micro XRCE-DDS` | **UXRCE-DDS Client** |
| module parameters name prefix | `XRCE_DDS_` | `UXRCE_DDS_` |
| module class name | `MicroddsClient` | **`UxrceddsClient`** |
|`init.d/rcS` whenever the module is mentioned | `microdds` | **`uxrce_dds`** |
| main doc page name | XRCE-DDS (PX4-FastDDS Bridge) | **uXRCE-DDS (PX4-micro XRCE-DDS Bridge)**|
| environment variable to have custom namespace in simulation | PX4_MICRODDS_NS | **PX4_UXRCE_DDS_NS** |

Signed-off-by: Beniamino Pozzan <beniamino.pozzan@phd.unipd.it>
 2023-05-03 11:51:53 -07:00
AlexKlimaj eb8342b477 ARK Cannode fix empty rc.serial 2023-04-28 09:31:31 -04:00
Thomas Stastny 82fd2987c9
fw pos control: revert name until we delineate this module a bit more (#21442) 2023-04-13 17:00:04 +02:00
PX4 BuildBot efab9be488 update all px4board kconfig 2023-03-24 10:01:58 -04:00
alexklimaj 0ae296bfe2 ARK CANnode fix params 2023-03-16 14:32:36 -04:00
Daniel Agar 6ec2b902cc ROMFS: only copy bootloader binary if systemcmds/bl_update included 2023-03-16 09:43:56 -04:00
Alex Klimaj ea97a38b2b
Initial Cannode PWM Support (#19748) 
* Add uavcannode esc/servo pwm control pipeline
* Remove cannode rc.interface with mixer purge
* Cannode add Kconfig options to reduce flash usage
 2023-03-15 11:20:07 -04:00
alexklimaj e5a957ae63 boards: arkv6x add pulldowns to GPIO pins UART7 RTS and UART7 CTS 2023-02-13 22:35:23 -05:00
Konrad 3e200bca0d fw_pos_control_l1: renaming to fw_path_navigation, l1 control is not used anymore, use a more generic naming. 2023-02-09 17:51:55 +01:00
alexklimaj 0776c47d88 Enable ARK CANnode pwm outputs 7 and 8 2023-01-24 14:49:21 -05:00
alexklimaj ac7dc030c3 Add ARK CANnode ver command 2023-01-24 14:49:21 -05:00
Daniel Agar 3822ef1519 boards: update all in tree bootloaders 2023-01-19 17:25:39 -05:00
Daniel Agar 9d7c4b8273
boards: ark_can-flow_default disable sensors/vehicle_acceleration to save flash 2023-01-18 22:58:19 -05:00
alexklimaj 5eb13e4448 ARKV6X bootloader init all pwm outputs as input pulldown 2023-01-18 21:52:11 -05:00
alexklimaj 7c2da8d1ef Enable ARKV6X SPIX SYNC, enable icm426889 and iim42652 CLKIN 2023-01-18 21:52:11 -05:00
Daniel Agar 635daeed8a NuttX push jlink-nuttx into cmake and enable CONFIG_DEBUG_TCBINFO by default 2023-01-12 09:05:26 -05:00
alexklimaj e19c7ca18b Add reboot command to ark flow 2023-01-11 08:11:18 +01:00
Daniel Agar dc5ce9b0ce
boards: NuttX increase default CONFIG_ARCH_INTERRUPTSTACK 512->768 bytes 
- during casual testing on default configs the stack was penetration was reaching ~90% which is a bit too close for comfort
 - increasing by 50% to be conservative
 2023-01-07 12:07:35 -05:00
bresch 14bf04b9a4 SIH: add to px4_fmu-v5_default and auto start GPS sim driver 
- add simulator kconfig dependencies
 - exclude SIH (+deps) where sufficient flash isn't available
 2023-01-04 16:26:15 -05:00
JaeyoungLim 21e88f64b4
Add new fixed wing rate control module (fw_rate_control) 
* Fixedwing rate control into a separate module
* Start fw_rate_control for vtol
* Move over airspeed related parameters to fw_rate_control

Co-authored-by: Silvan Fuhrer <silvan@auterion.com>
 2023-01-04 11:14:00 -05:00
Daniel Agar 0fbb6db6d4 boards: update all NuttX defconfig (make all_olddefconfig) 2022-12-29 12:50:37 -05:00
Daniel Agar c2f15f5957 boards: update all px4boards (make all_px4_savedefconfig) 2022-12-29 12:50:37 -05:00
alexklimaj 35a9dba6e6 Enable ARKV6X heater 2022-12-22 15:12:32 -05:00
Daniel Agar f2cd7667dc systemcmds/bsondump: new command line utility (extracted from parameters) 2022-12-21 10:14:00 -05:00
Peter van der Perk b8e07cc52c Fix Ethernet Socket Defaults 2022-12-19 13:24:55 -05:00
Daniel Agar 41fa53605c
boards: rebuild STM32H7 bootloaders and px4-io-v2 2022-12-09 11:02:21 -05:00
alexklimaj c7a8589afc Add ARK PAB Carrier 
Add ARK_FMU_V6X to RCS netman

Remove arkv6x rc single wire

Fix arkv6x mtd

arkv6x bootloader init all pins to prevent power cycling peripherals on boot

arkv6x don't power cycle sd card on boot

arkv6x add UART4 Telem 4
 2022-11-22 18:14:50 -05:00
Daniel Agar 2cb4ef0629
NuttX 10.3+ upgrade (#20190) 
Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com>
Co-authored-by: David Sidrane <David.Sidrane@NscDg.com>
Co-authored-by: alexklimaj <alex@arkelectron.com>
 2022-11-20 20:28:07 -05:00
Igor Mišić 815eed2c6d mtd: add support for extended HW revision 2022-11-10 07:45:44 +01:00
alexklimaj fdf4b668eb Ark flow rev 3 with PAA3905" 
Add AFBR-S50LX85D
 2022-09-22 20:36:43 -04:00
Alex Klimaj 0ce76679b7
boards: add new ARKV6X (#20191) 2022-09-15 13:13:49 -04:00
Alex Klimaj efcf4c95fd
drivers/uavcannode: Add RTCMStream subscriber and fix RTCMStream Publisher (#20056) 
* Add cannode RTCMStream subscriber
* Fix uavcan RTCMStream publisher
* Break out CANNODE_SUB_RTCM and CANNODE_SUB_MBD
 2022-09-09 15:16:09 -04:00
Daniel Agar ce337a3d80 delete unused PWM IOCTLs 2022-09-09 09:14:09 -04:00
Daniel Agar d3312f955f delete systemcmds/pwm 2022-09-09 09:14:09 -04:00
Daniel Agar 5dd1e5a018 delete systemcmds/mixer 2022-09-09 09:14:09 -04:00
alexklimaj 4cc3e78558 Add mag bias estimator to CAN GPS units with IMUs 
- run `sensors` hub to process sensor_mag and publish vehicle_magnetometer
 - update uavcannode to use vehicle_magnetometer
 2022-06-19 15:46:36 -04:00
Daniel Agar c7cec4252c sensors: add CONFIG_SENSORS_VEHICLE_AIRSPEED for airspeed/differential pressure 
- disable CONFIG_SENSORS_VEHICLE_AIRSPEED on boards only used for multicopter
 2022-06-17 19:31:45 -04:00