563fd8427a
boards: increase init stack size by 100B
...
Signed-off-by: Silvan Fuhrer <silvan@auterion.com>
2023-10-02 09:37:06 +02:00
c1dbe177b8
boards: move FRAM emulated sector size to the 32-byte granularity ( #21204 )
2023-09-20 16:50:36 -04:00
7589ee00e8
boards: holybro kakutef7 switch to ekf2
2023-09-15 10:02:09 -04:00
3d61ab84c4
Cannode add ability to get node ID after boot. Fix ARK CAN OPT_WAIT_FOR_GETNODEINFO_JUMPER_GPIO_INVERT
2023-08-30 11:40:01 -04:00
ecbc5b83a0
kakute: disable some EKF2 features
...
To save flash.
Signed-off-by: Julian Oes <julian@oes.ch>
2023-08-28 13:20:00 +02:00
9d97c7c5cb
kakuteh7: use EKF2 by default
...
Signed-off-by: Julian Oes <julian@oes.ch>
2023-08-28 13:20:00 +02:00
ae70f9c640
attitude_estimator_q: disable ATT_ACC_COMP by default
...
Improves tracking in the CI test, and I always disabled it on my vehicles
as well.
2023-08-08 12:28:52 -04:00
70826c5af4
update all px4board kconfig
2023-07-18 14:28:21 -04:00
abe0ca1307
boards/holybro/kakutef7: enable gps, osd, top, dmesg. Disable uxrce_dds
2023-07-03 11:22:33 +02:00
f5193bb155
boards/holybro/kakutef7: enable rc serial singlewire
2023-07-03 11:22:33 +02:00
2307d4aa22
boards/holybro/kakutef7: remove px4_platform_config
...
kakutef7 doesn't use manifest
2023-07-03 11:22:33 +02:00
c95539e8ce
boards: increase init stack size by 150B
...
External airframes need a bit more stack due to nested configs.
2023-06-09 21:11:11 -04:00
9e5420bbbd
microdds_client: rename to uxrce_dds_client
...
| | old version | new version (second proposal) |
|-|-|-|
| module name | `microdds_client` | **`uxrce_dds_client`** |
| strings / comments about the module | non consistent | **UXRCE-DDS Client** |
| menuconfig option | `MODULES_MICRODDS_CLIENT` | **`MODULES_UXRCE_DDS_CLIENT`** |
| module parameters group name | `Micro XRCE-DDS` | **UXRCE-DDS Client** |
| module parameters name prefix | `XRCE_DDS_` | `UXRCE_DDS_` |
| module class name | `MicroddsClient` | **`UxrceddsClient`** |
|`init.d/rcS` whenever the module is mentioned | `microdds` | **`uxrce_dds`** |
| main doc page name | XRCE-DDS (PX4-FastDDS Bridge) | **uXRCE-DDS (PX4-micro XRCE-DDS Bridge)**|
| environment variable to have custom namespace in simulation | PX4_MICRODDS_NS | **PX4_UXRCE_DDS_NS** |
Signed-off-by: Beniamino Pozzan <beniamino.pozzan@phd.unipd.it>
2023-05-03 11:51:53 -07:00
09d86085bd
kakute f7/h7/h7mini/h7v2: enable airspeed
...
Without this airspeed sensors are not working which is not intuitive.
Signed-off-by: Julian Oes <julian@oes.ch>
2023-04-18 07:45:52 +02:00
82fd2987c9
fw pos control: revert name until we delineate this module a bit more ( #21442 )
2023-04-13 17:00:04 +02:00
efab9be488
update all px4board kconfig
2023-03-24 10:01:58 -04:00
6ec2b902cc
ROMFS: only copy bootloader binary if systemcmds/bl_update included
2023-03-16 09:43:56 -04:00
ea97a38b2b
Initial Cannode PWM Support ( #19748 )
...
* Add uavcannode esc/servo pwm control pipeline
* Remove cannode rc.interface with mixer purge
* Cannode add Kconfig options to reduce flash usage
2023-03-15 11:20:07 -04:00
ea20217c1b
kakuteh7v2/mini: EKF2 is already the default
2023-03-08 10:48:31 -05:00
593b3d250d
kakuteh7mini: remove duplicate param defaults
...
Signed-off-by: Julian Oes <julian@oes.ch>
2023-03-08 10:48:31 -05:00
ed49ed3903
kakuteh7v2/mini: use EKF2 without mag by default
...
This switches from attitude_estimator_q to EKF2 which should now work
without mag when the params are set to SYS_HAS_MAG = 0 and
EKF2_IMU_CTRL = 7 to enable gravity fusion.
Signed-off-by: Julian Oes <julian@oes.ch>
2023-03-08 10:48:31 -05:00
d69d99b191
kakuteh7v2/mini: switch on VTX+
...
This just always switches the VTX+ power on.
Signed-off-by: Julian Oes <julian@oes.ch>
2023-02-13 22:00:49 -05:00
3e200bca0d
fw_pos_control_l1: renaming to fw_path_navigation, l1 control is not used anymore, use a more generic naming.
2023-02-09 17:51:55 +01:00
cc5509381a
boards: update all NuttX defconfigs
2023-01-25 14:47:48 -05:00
03f681ebf8
update all px4board kconfig
2023-01-25 12:57:17 -05:00
c31867f104
support for KakuteH7v2, KakuteH7mini, and BMI270 IMU driver ( #20545 )
...
Signed-off-by: Julian Oes <julian@oes.ch>
2023-01-22 19:41:39 -05:00
3822ef1519
boards: update all in tree bootloaders
2023-01-19 17:25:39 -05:00
45912066d2
fix copyright header year range
2023-01-14 09:16:16 -05:00
635daeed8a
NuttX push jlink-nuttx into cmake and enable CONFIG_DEBUG_TCBINFO by default
2023-01-12 09:05:26 -05:00
e6c4416250
update all px4board kconfig
2023-01-07 21:53:01 -05:00
dc5ce9b0ce
boards: NuttX increase default CONFIG_ARCH_INTERRUPTSTACK 512->768 bytes
...
- during casual testing on default configs the stack was penetration was reaching ~90% which is a bit too close for comfort
- increasing by 50% to be conservative
2023-01-07 12:07:35 -05:00
21e88f64b4
Add new fixed wing rate control module (fw_rate_control)
...
* Fixedwing rate control into a separate module
* Start fw_rate_control for vtol
* Move over airspeed related parameters to fw_rate_control
Co-authored-by: Silvan Fuhrer <silvan@auterion.com>
2023-01-04 11:14:00 -05:00
40e3503c39
boards: fix all NuttX configs (CONFIG_SMALL NuttX upgrade migration)
2022-12-29 12:50:37 -05:00
0fbb6db6d4
boards: update all NuttX defconfig (make all_olddefconfig)
2022-12-29 12:50:37 -05:00
c2f15f5957
boards: update all px4boards (make all_px4_savedefconfig)
2022-12-29 12:50:37 -05:00
f2cd7667dc
systemcmds/bsondump: new command line utility (extracted from parameters)
2022-12-21 10:14:00 -05:00
41fa53605c
boards: rebuild STM32H7 bootloaders and px4-io-v2
2022-12-09 11:02:21 -05:00
9faa8e23e8
NuttX Upgrade CONFIG_LIB_BOARDCTL->CONFIG_BOARDCTL
2022-11-22 14:30:08 -05:00
2cb4ef0629
NuttX 10.3+ upgrade ( #20190 )
...
Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com>
Co-authored-by: David Sidrane <David.Sidrane@NscDg.com>
Co-authored-by: alexklimaj <alex@arkelectron.com>
2022-11-20 20:28:07 -05:00
cea185268e
msg ROS2 compatibility, microdds_client improvements (timesync, reduced code size, added topics, etc), fastrtps purge
...
- update all msgs to be directly compatible with ROS2
- microdds_client improvements
- timesync
- reduced code size
- add to most default builds if we can afford it
- lots of other little changes
- purge fastrtps (I tried to save this multiple times, but kept hitting roadblocks)
2022-10-19 19:36:47 -04:00
8f25acd428
sih remove gps and use standalone sensor_gps_sim
2022-09-09 18:00:50 -04:00
bfe0d71a21
sih remove baro and use standalone sensor_baro_sim
2022-09-09 18:00:50 -04:00
c5336abba2
sih remove mag and use standalone sensor_mag_sim
2022-09-09 18:00:50 -04:00
bcdd2203d3
delete systemcmds/motor_test and msg/test_motor.msg
2022-09-09 09:14:09 -04:00
d3312f955f
delete systemcmds/pwm
2022-09-09 09:14:09 -04:00
5dd1e5a018
delete systemcmds/mixer
2022-09-09 09:14:09 -04:00
cac9c51ac8
ROMFS: purge old mixing system
...
- SYS_USE_IO is now off by default (enabled by default per board)
2022-09-09 09:14:09 -04:00
2776b723ea
holybro/kakuteh7: switch to flash-based params
2022-08-31 09:42:59 +02:00
4040e4cdf2
simulation organization and cleanup
...
- new modules/simulation directory to collect all simulators and related modules
- new Tools/simulation directory to collect and organize scattered simulation submodules, scripts, etc
- simulation module renamed to simulator_mavlink
- sih renamed to simulator_sih (not a great name, but I wanted to be clear it was a simulator)
- ignition_simulator renamed to simulator_ignition_bridge
- large sitl_target.cmake split by simulation option and in some cases pushed to appropriate modules
- sitl targets broken down to what's actually available (eg jmavsim only has 1 model and 1 world)
- new Gazebo consistently referred to as Ignition for now (probably the least confusing thing until we fully drop Gazebo classic support someday)
2022-08-25 09:10:03 -04:00
7b810bb776
boards: update px4 io binary
2022-08-23 21:07:18 -04:00
Silvan Fuhrer
Igor Mišić
Daniel Agar
alexklimaj
Julian Oes
Beat Küng
PX4 BuildBot
Beniamino Pozzan
Thomas Stastny
Konrad
Jiangxuan Chen
JaeyoungLim
David Sidrane