px4-firmware/boards/auav/x21/default.cmake


px4_add_board(
	PLATFORM nuttx
	VENDOR auav
	MODEL x21
	LABEL default
	TOOLCHAIN arm-none-eabi
	ARCHITECTURE cortex-m4
	ROMFSROOT px4fmu_common
	IO px4_io-v2_default
	TESTING
	UAVCAN_INTERFACES 1
	SERIAL_PORTS
		GPS1:/dev/ttyS3
		TEL1:/dev/ttyS1
		TEL2:/dev/ttyS2
	DRIVERS
		adc
		barometer # all available barometer drivers
		batt_smbus
		camera_capture
		camera_trigger
		differential_pressure # all available differential pressure drivers
		distance_sensor # all available distance sensor drivers
		#dshot
		gps
		#heater
		#imu # all available imu drivers
		imu/mpu6000
		imu/mpu9250
		irlock
		lights/blinkm
		lights/rgbled
		#lights/rgbled_ncp5623c
		#lights/rgbled_pwm
		magnetometer # all available magnetometer drivers
		mkblctrl
		#optical_flow # all available optical flow drivers
		optical_flow/px4flow
		#osd
		pca9685
		#power_monitor/ina226
		#protocol_splitter
		pwm_input
		pwm_out_sim
		px4fmu
		px4io
		roboclaw
		tap_esc
		telemetry # all available telemetry drivers
		test_ppm
		tone_alarm
		uavcan
	MODULES
		airspeed_selector
		attitude_estimator_q
		battery_status
		camera_feedback
		commander
		dataman
		ekf2
		events
		fw_att_control
		fw_pos_control_l1
		land_detector
		landing_target_estimator
		load_mon
		local_position_estimator
		logger
		mavlink
		mc_att_control
		mc_pos_control
		mc_rate_control
		navigator
		rc_update
		rover_pos_control
		sensors
		sih
		vmount
		vtol_att_control
	SYSTEMCMDS
		bl_update
		config
		#dmesg
		dumpfile
		esc_calib
		hardfault_log
		i2cdetect
		led_control
		mixer
		motor_ramp
		motor_test
		mtd
		nshterm
		param
		perf
		pwm
		reboot
		reflect
		sd_bench
		shutdown
		tests # tests and test runner
		top
		topic_listener
		tune_control
		usb_connected
		ver
		work_queue
	EXAMPLES
		bottle_drop # OBC challenge
		fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control
		hello
		hwtest # Hardware test
		#matlab_csv_serial
		px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html
		px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html
		rover_steering_control # Rover example app
		uuv_example_app
	)
boards organization 2018-11-16 13:52:37 -04:00
			`px4_add_board(`
			`PLATFORM nuttx`
			`VENDOR auav`
			`MODEL x21`
boards: alphabetize and sync common drivers and modules 2019-11-19 20:59:09 -04:00			`LABEL default`
cmake remove need for platform px4_add_board_os - explicitly set TOOLCHAIN on all NuttX targets 2018-11-23 11:01:03 -04:00			`TOOLCHAIN arm-none-eabi`
cmake use standard mechanisms for settings flags 2018-11-23 13:39:44 -04:00			`ARCHITECTURE cortex-m4`
boards organization 2018-11-16 13:52:37 -04:00			`ROMFSROOT px4fmu_common`
boards new split VENDOR_MODEL naming convention 2018-11-22 00:27:21 -04:00			`IO px4_io-v2_default`
boards organization 2018-11-16 13:52:37 -04:00			`TESTING`
			`UAVCAN_INTERFACES 1`
			`SERIAL_PORTS`
			`GPS1:/dev/ttyS3`
			`TEL1:/dev/ttyS1`
			`TEL2:/dev/ttyS2`
			`DRIVERS`
adc: refactor into arch-specific directories 2019-08-26 09:21:49 -03:00			`adc`
boards organization 2018-11-16 13:52:37 -04:00			`barometer # all available barometer drivers`
			`batt_smbus`
camera_capture add to all boards 2019-02-11 15:15:28 -04:00			`camera_capture`
boards organization 2018-11-16 13:52:37 -04:00			`camera_trigger`
			`differential_pressure # all available differential pressure drivers`
			`distance_sensor # all available distance sensor drivers`
boards: alphabetize and sync common drivers and modules 2019-11-19 20:59:09 -04:00			`#dshot`
boards organization 2018-11-16 13:52:37 -04:00			`gps`
			`#heater`
			`#imu # all available imu drivers`
			`imu/mpu6000`
			`imu/mpu9250`
			`irlock`
drivers create lights category (directory) 2018-12-01 14:53:54 -04:00			`lights/blinkm`
			`lights/rgbled`
boards: alphabetize and sync common drivers and modules 2019-11-19 20:59:09 -04:00			`#lights/rgbled_ncp5623c`
drivers create lights category (directory) 2018-12-01 14:53:54 -04:00			`#lights/rgbled_pwm`
boards organization 2018-11-16 13:52:37 -04:00			`magnetometer # all available magnetometer drivers`
			`mkblctrl`
Move optical flow drivers to own subdirectory 2019-05-28 15:41:30 -03:00			`#optical_flow # all available optical flow drivers`
			`optical_flow/px4flow`
boards: alphabetize and sync common drivers and modules 2019-11-19 20:59:09 -04:00			`#osd`
boards organization 2018-11-16 13:52:37 -04:00			`pca9685`
boards: alphabetize and sync common drivers and modules 2019-11-19 20:59:09 -04:00			`#power_monitor/ina226`
			`#protocol_splitter`
boards organization 2018-11-16 13:52:37 -04:00			`pwm_input`
			`pwm_out_sim`
			`px4fmu`
			`px4io`
			`roboclaw`
			`tap_esc`
			`telemetry # all available telemetry drivers`
			`test_ppm`
ToneAlarm class refactoring to implement an interface for hardware specific methods and a single ToneAlarm class. 2019-01-10 17:39:27 -04:00			`tone_alarm`
move uavcan from modules to drivers 2018-12-01 15:00:46 -04:00			`uavcan`
boards organization 2018-11-16 13:52:37 -04:00			`MODULES`
boards: alphabetize and sync common drivers and modules 2019-11-19 20:59:09 -04:00			`airspeed_selector`
boards organization 2018-11-16 13:52:37 -04:00			`attitude_estimator_q`
boards: alphabetize and sync common drivers and modules 2019-11-19 20:59:09 -04:00			`battery_status`
boards organization 2018-11-16 13:52:37 -04:00			`camera_feedback`
			`commander`
			`dataman`
			`ekf2`
			`events`
			`fw_att_control`
			`fw_pos_control_l1`
			`land_detector`
			`landing_target_estimator`
			`load_mon`
			`local_position_estimator`
			`logger`
			`mavlink`
			`mc_att_control`
			`mc_pos_control`
boards: alphabetize and sync common drivers and modules 2019-11-19 20:59:09 -04:00			`mc_rate_control`
boards organization 2018-11-16 13:52:37 -04:00			`navigator`
sensors split rc_update into new standalone module 2019-11-24 14:25:11 -04:00			`rc_update`
boards: alphabetize and sync common drivers and modules 2019-11-19 20:59:09 -04:00			`rover_pos_control`
boards organization 2018-11-16 13:52:37 -04:00			`sensors`
simulator in hardware, new module added that allows to run a simulator in the hardware autopilot, for more documentation visit https://github.com/romain-chiap/PX4_SIH_QuadX 2019-02-06 11:57:12 -04:00			`sih`
move vmount to modules (it's not a driver) 2018-12-01 14:58:15 -04:00			`vmount`
boards organization 2018-11-16 13:52:37 -04:00			`vtol_att_control`
			`SYSTEMCMDS`
			`bl_update`
			`config`
boards: alphabetize and sync common drivers and modules 2019-11-19 20:59:09 -04:00			`#dmesg`
boards organization 2018-11-16 13:52:37 -04:00			`dumpfile`
			`esc_calib`
			`hardfault_log`
create systemcmds/i2cdetect tool to scan i2c bus 2019-07-05 15:21:42 -03:00			`i2cdetect`
boards organization 2018-11-16 13:52:37 -04:00			`led_control`
			`mixer`
			`motor_ramp`
			`motor_test`
			`mtd`
			`nshterm`
			`param`
			`perf`
			`pwm`
			`reboot`
			`reflect`
			`sd_bench`
			`shutdown`
			`tests # tests and test runner`
			`top`
			`topic_listener`
			`tune_control`
			`usb_connected`
			`ver`
px4_work_queue: command line status output and shutdown empty queues * adds a work_queue systemcmd that will bring a tree view of all active work queues and work items * WorkQueues now track attached WorkItems and will shutdown when the last WorkItem is detached 2019-10-02 13:23:17 -03:00			`work_queue`
boards organization 2018-11-16 13:52:37 -04:00			`EXAMPLES`
			`bottle_drop # OBC challenge`
			`fixedwing_control # Tutorial code from https://px4.io/dev/example_fixedwing_control`
move posix/tests/hello to examples/hello and include everywhere 2018-11-24 12:52:07 -04:00			`hello`
boards organization 2018-11-16 13:52:37 -04:00			`hwtest # Hardware test`
			`#matlab_csv_serial`
Correct links to example docs 2019-03-12 19:33:27 -03:00			`px4_mavlink_debug # Tutorial code from http://dev.px4.io/en/debug/debug_values.html`
			`px4_simple_app # Tutorial code from http://dev.px4.io/en/apps/hello_sky.html`
boards organization 2018-11-16 13:52:37 -04:00			`rover_steering_control # Rover example app`
			`uuv_example_app`
			`)`