Andrew Tridgell
54e4c6e1be
hwdef: leave MatekL431 ROMFS uncompressed
...
this allows for bl update when low on memory
2022-03-19 12:06:04 +11:00
mateksys
35ed87a5db
AP_HAL_ChibiOS: add MatekL431 AP_Periph hwdef
2022-03-19 12:06:04 +11:00
Peter Barker
f7608c22da
AP_HAL_ChibiOS: set pwm output values in simstate object
2022-03-17 14:39:55 +11:00
Peter Barker
8b2f85756a
AP_HAL_ChibiOS: instantiate SIMState object in HAL
2022-03-17 14:39:55 +11:00
Andy Piper
ceef68e07b
AP_HAL_ChibiOS: allow H7 480Mhz clock speed to be configured in hwdef via MCU_CLOCKRATE_MHZ
2022-03-16 20:37:30 +11:00
Andy Piper
222717cc88
AP_HAL_ChibiOS: add KakuteH7-bdshot target
2022-03-15 10:18:58 +11:00
Peter Barker
470cb2caa2
AP_HAL_ChibiOS: turn autocal off for periphs
2022-03-15 08:52:37 +11:00
李孟晓
81b129d3b3
AP_HAL_ChibiOS: CUAVv5: use icm42688p instead of icm20602
2022-03-15 05:59:14 +11:00
AndKe
caaa5002ab
AP_HAL_ChibiOS: add OREOLED to CubeGreen
2022-03-14 09:19:37 +11:00
iainguilliard
ea0b6dfcb2
HAL_ChibiOS: add MatekF405-STD S7 PWM output
...
MatekF405-STD board has a pad for S7 PWM output from pin PB8 missing in hwdef
2022-03-13 14:00:26 +11:00
Peter Barker
e486671bb2
AP_HAL_ChibiOS: correct #ifndef nesting in periph defaults
2022-03-13 13:23:51 +11:00
bugobliterator
6a0c46d241
AP_HAL_Periph: assert clock is FDCANCLK is 80MHz for H7 boards
2022-03-11 18:13:54 +11:00
bugobliterator
633eb0db8b
AP_HAL_ChibiOS: move to using data_32 for copying into CANFD buffer
2022-03-11 18:13:54 +11:00
bugobliterator
faf0c0d7c3
AP_HAL_ChibiOS: set canfd bitrates using CANFD_SUPPORTED opt
2022-03-11 18:13:54 +11:00
bugobliterator
4bdbd37731
AP_HAL_ChibiOS: use datalength when copying payload into CAN Frames
2022-03-11 18:13:54 +11:00
bugobliterator
90a660b445
AP_HAL_ChibiOS: update clock tree to have FDCAN Base clock at 80MHz
2022-03-11 18:13:54 +11:00
bugobliterator
47dd964e63
AP_HAL_ChibiOS: add init method to take in separate canfd bitrate
2022-03-11 18:13:54 +11:00
Siddharth Purohit
72090d10da
AP_HAL_ChibiOS: add hwdef config to enable CANFD support
2022-03-11 18:13:54 +11:00
Siddharth Purohit
8aa047d876
AP_HAL_ChibiOS: add support for CANFD for H7 and G4
2022-03-11 18:13:54 +11:00
MallikarjunSE
228796d55b
AP_HAL_ChibiOS: Add Sierra-F9P support
2022-03-10 08:29:51 +11:00
murata
eb78a0a4a6
hwdef: Set the maximum number of barometric pressure sensors to 1
2022-03-08 14:21:31 -08:00
murata
60eb6ff1b7
hwdef: Maximum number of battery monitors is 1
2022-03-08 14:21:31 -08:00
Andrew Tridgell
74f1a8007d
hwdef: enable GPS_MOVING_BASELINE on FreeflyRTK and f303-GPS
...
this allows for F9P based dual-GPS yaw on DroneCAN peripherals with
auto-config
2022-03-09 07:52:42 +11:00
Andrew Tridgell
86c25b98d5
hwdef: added HolybroG4_GPS
2022-03-09 07:51:35 +11:00
Andrew Tridgell
93031e297d
HAL_ChibiOS: fixed min/max inversion in MCU voltage logging
2022-03-08 11:33:21 +11:00
MallikarjunSE
5cd1c7783d
hwdef: hwdef update with watchdog
2022-03-07 16:15:41 +11:00
MallikarjunSE
360ddb2aed
hwdef:update storage pages and enable watchdog
2022-03-07 16:15:41 +11:00
Andrew Tridgell
7999335727
hwdef: fixed buzzer on CUAV_GPS peripheral
2022-03-03 16:26:27 +11:00
Peter Barker
11f7cce978
AP_HAL_ChibiOS: allow specification of AUTOBUILD_TARGETS in hwdef files
2022-03-03 09:03:17 +11:00
Andy Piper
d589c0fc5e
AP_HAL_ChibiOS: normalize BeastH7v2 in line with BeastF7v2 definition
2022-03-02 15:46:17 +11:00
Evgeniy
32afbbdec4
AP_HAL_ChibiOS: BeastH7v2 board added
2022-03-02 15:46:17 +11:00
Andy Piper
ed952a0ea0
AP_HAL_ChibiOS: allow flash to be write-protected/unprotected on reboot
...
control protection support via HAL_FLASH_PROTECTION
provide support for flash protection on SPRacingH7
SPRacingH7 bootloader needs to use w25q-dtr
2022-02-24 10:19:07 +11:00
Henry Wurzburg
ac88f354fc
hwdef: update Swan-K1 with new harmonic notch mask to avoid errors
2022-02-23 18:45:51 +11:00
Andy Piper
02219ba3e5
AP_HAL_ChibiOS: ensure chan_offset is initialized before using it
2022-02-23 18:35:43 +11:00
Andy Piper
b6022ca5d4
AP_HAL_ChibiOS: add support for alternate alarm PWM group
...
account for inverted alarms and build on boards without PWM
enable alarm based on pwm
shutdown alarm channel if using a different one
2022-02-23 18:35:43 +11:00
Andy Piper
f840315aa4
AP_HAL_ChibiOS: clock H750 at 480Mhz when using 8Mhz, 16Mhz and 24Mhz crystals
2022-02-23 18:19:56 +11:00
Andrew Tridgell
96518c9eda
HAL_ChibiOS: added CPU defines to hwdef
...
needed for checks like defined(STM32F1)
2022-02-22 12:13:19 +11:00
Andrew Tridgell
6039b8012a
HAL_ChibiOS: define HAL_USE_SDMMC
2022-02-22 12:13:19 +11:00
Andrew Tridgell
638e20a0b9
HAL_ChibiOS: bring in hal.h where it is needed
2022-02-22 12:13:19 +11:00
Andrew Tridgell
25cc8203d8
HAL_ChibiOS: added CHIBIOS_BOARD_NAME define
2022-02-22 12:13:19 +11:00
Andrew Tridgell
fd8d28e23c
HAL_ChibiOS: reduced time in critical sections for CAN processing
2022-02-19 18:24:56 +11:00
Andrew Tridgell
7e18d85f7e
hwdef: added compat board ID for FreeFly RTK GPS
2022-02-17 14:37:41 +11:00
Andrew Tridgell
f2308e96a9
HAL_ChibiOS: added stm32_was_software_reset()
2022-02-17 14:37:41 +11:00
Andrew Tridgell
a641eb3a30
HAL_ChibiOS: support ALT_BOARD_ID
...
allow for compat with px4 board ID for the same board
2022-02-17 14:37:41 +11:00
Andy Piper
83ac78e969
AP_HAL_ChibiOS: add support for @SYS/timers.txt
...
move out prescaler calculation and use closest prescaler everywhere
include timer id in PWM groups
2022-02-16 15:28:04 +11:00
Nathan Costa
9f7aa715b1
AP_HAL_ChibiOS: add support for CAN/I2C switch
2022-02-16 13:25:58 +11:00
Andy Piper
7b15245efe
AP_HAL_ChibiOS: update SPRacingH7 Extreme hwdef and add README
...
add SPRacingH7 board layout
2022-02-15 11:32:52 +11:00
Andrew Tridgell
33ebc83a68
AP_HAL_ChibiOS: disable CAN filtering except on AP_Periph
...
this saves flash space and makes CAN forwarding for any bus without
reconfigure/reboot easy. CAN filtering is not useful in the main
flight controller firmware as we want to see nearly all packets
2022-02-12 16:36:05 +11:00
Andrew Tridgell
124c9d5d9b
HAL_ChibiOS: support mavcan message forwarding
2022-02-12 16:36:05 +11:00
Andy Piper
89ba955419
AP_HAL_ChibiOS: only change SD card on external flash boards
2022-02-09 12:47:55 +00:00
