.. |
.gitignore
|
Improvements to cmake.
|
2011-09-29 21:23:26 -04:00 |
APM_Config.h
|
Copter: add coax heli support
|
2014-02-07 12:36:04 +09:00 |
APM_Config_mavlink_hil.h
|
Copter: added SERIAL2_BAUD and rename SERIAL3_BAUD to SERIAL1_BAUD
|
2013-11-26 13:05:32 +11:00 |
AP_State.pde
|
Copter: ARMING_CHECK made into bitmask
|
2013-11-15 17:13:56 +09:00 |
ArduCopter.pde
|
Copter: add coax heli support
|
2014-02-07 12:36:04 +09:00 |
Attitude.pde
|
Copter: landing_complete stays true until thr is raised
|
2014-01-22 14:38:35 +09:00 |
GCS_Mavlink.pde
|
Copter: add coax heli support
|
2014-02-07 12:36:04 +09:00 |
Log.pde
|
Copter: log PX4 and NuttX versions in logs
|
2014-01-14 15:38:51 +11:00 |
Makefile
|
ArduCopter Makefile: Don't include targets.mk directly (included by apm.mk)
|
2013-01-09 13:15:38 -08:00 |
Parameters.h
|
Copter: add coax heli support
|
2014-02-07 12:36:04 +09:00 |
Parameters.pde
|
Copter: add coax heli support
|
2014-02-07 12:36:04 +09:00 |
ReleaseNotes.txt
|
Copter: firmware to AC3.1.2-rc1
|
2014-01-30 14:00:20 +09:00 |
UserCode.pde
|
Copter: minor user hooks cleanup
|
2013-05-17 12:19:07 +09:00 |
UserVariables.h
|
Copter: minor user hooks cleanup
|
2013-05-17 12:19:07 +09:00 |
auto_tune.pde
|
Copter: reduce autotune min rate D to 0.002
|
2013-12-09 14:17:31 +09:00 |
command_description.txt
|
Cleanup: rename files with spaces in their names, replace with underscores
|
2012-02-28 16:14:31 -08:00 |
commands.pde
|
Copter: remove old comments
|
2013-09-24 21:45:43 +09:00 |
commands_logic.pde
|
Copter: converted to AP_ServoRelayEvents
|
2014-01-20 17:06:29 +11:00 |
commands_process.pde
|
Copter: reject change_command if not in AUTO
|
2013-11-14 13:49:37 +09:00 |
compat.h
|
Copter LEDs: replace bitRead with bitmask
|
2013-04-01 13:10:12 +09:00 |
compat.pde
|
Copter: remove unused compat.pde entries
|
2014-01-30 14:33:55 +09:00 |
config.h
|
Copter: remove dup definition of FRAME_ORIENTATION
|
2014-01-21 21:44:17 +09:00 |
config_channels.h
|
ArduCopter: remove unnecessary references to CH_CAM_PITCH, CH_CAM_ROLL, CH_CAM_YAW
|
2012-09-02 12:47:27 +09:00 |
control_modes.pde
|
Copter: Added GCS feedback for save_trim()
|
2014-01-16 14:23:19 +09:00 |
crash_check.pde
|
Copter: add alt and throttle checks to crash detector
|
2013-10-30 13:33:09 +09:00 |
defines.h
|
Copter: add coax heli support
|
2014-02-07 12:36:04 +09:00 |
drift.pde
|
Copter: Drift updates control_roll, pitch
|
2013-11-30 18:06:56 +09:00 |
events.pde
|
Copter: converted to AP_ServoRelayEvents
|
2014-01-20 17:06:29 +11:00 |
failsafe.pde
|
Copter: updates for AP_HAL::MemberProc
|
2013-09-30 21:06:43 +10:00 |
fence.pde
|
Copter: GPS ok only when not glitching
|
2013-11-11 22:24:18 +09:00 |
flip.pde
|
TradHeli: add THROTTLE_MANUAL_HELI
|
2013-11-15 22:57:53 +09:00 |
heli.pde
|
Copter: remove PID logging
|
2014-01-13 17:23:39 +09:00 |
inertia.pde
|
Copter: combine NTUN and INAV dataflash msgs
|
2014-01-13 22:00:11 +09:00 |
leds.pde
|
Copter: remove CopterLED from main code
|
2013-11-30 18:20:55 +09:00 |
motors.pde
|
Copter: add coax heli support
|
2014-02-07 12:36:04 +09:00 |
navigation.pde
|
Copter: combine nav_roll and control_roll
|
2013-11-27 23:11:30 +09:00 |
nocore.inoflag
|
ArduCopter: add nocore.inoflag and Arduino.h
|
2012-12-20 14:51:40 +11:00 |
perf_info.pde
|
ArduCopter: performance monitoring - changed loop counters to uint16_t.
|
2012-11-19 11:55:47 +09:00 |
position_vector.pde
|
Copter/position_vector: remove const specifiers on objects returned by
|
2013-10-27 13:41:46 +09:00 |
radio.pde
|
Copter: add coax heli support
|
2014-02-07 12:36:04 +09:00 |
read_me.text
|
renamed top level directories
|
2011-09-09 11:27:41 +10:00 |
sensors.pde
|
Copter: faster baro calibration when arming
|
2014-01-15 23:28:24 +09:00 |
setup.pde
|
Copter: remove frame setup through CLI
|
2014-01-21 21:42:59 +09:00 |
system.pde
|
Copter: converted to AP_ServoRelayEvents
|
2014-01-20 17:06:29 +11:00 |
test.pde
|
Copter: fix compiler warning from motorsync test
|
2014-01-26 11:08:34 +09:00 |