.. |
.gitignore
|
Improvements to cmake.
|
2011-09-29 21:23:26 -04:00 |
APM_Config.h
|
Copter: minor user hooks cleanup
|
2013-05-17 12:19:07 +09:00 |
APM_Config_mavlink_hil.h
|
uncrustify ArduCopter/APM_Config_mavlink_hil.h
|
2012-08-21 18:56:56 -07:00 |
AP_State.pde
|
Copter: integrate AP_Notify batt and radio failsafes
|
2013-09-11 14:36:38 +09:00 |
ArduCopter.pde
|
Copter: enable motor slow start in auto mode
|
2013-09-13 14:32:19 +09:00 |
Attitude.pde
|
Copter: #define for initial altitude jump during take-off
|
2013-09-12 22:31:42 +09:00 |
GCS.h
|
Copter: added support for partial mission load
|
2013-05-29 16:25:05 +10:00 |
GCS_Mavlink.pde
|
AC: if vehicle is !flying show hb state as MAV_STATE_STANDBY
|
2013-09-09 20:51:54 +09:00 |
Log.pde
|
Copter: fixed PX4 build
|
2013-08-19 21:12:41 +10:00 |
Makefile
|
ArduCopter Makefile: Don't include targets.mk directly (included by apm.mk)
|
2013-01-09 13:15:38 -08:00 |
Parameters.h
|
Copter: remove x100 from IMAX definitions
|
2013-08-19 22:38:34 +09:00 |
Parameters.pde
|
Copter: increase default battery capacity to 3500mAh
|
2013-09-15 11:54:07 +09:00 |
ReleaseNotes.txt
|
Copter: update release notes to add slow take-off
|
2013-09-13 20:53:39 +09:00 |
UserCode.pde
|
Copter: minor user hooks cleanup
|
2013-05-17 12:19:07 +09:00 |
UserVariables.h
|
Copter: minor user hooks cleanup
|
2013-05-17 12:19:07 +09:00 |
command_description.txt
|
Cleanup: rename files with spaces in their names, replace with underscores
|
2012-02-28 16:14:31 -08:00 |
commands.pde
|
Copter: fix longitude_scale() call for new API
|
2013-08-05 10:24:21 +10:00 |
commands_logic.pde
|
Copter: allow override of auto throttle mode
|
2013-08-28 11:45:07 +09:00 |
commands_process.pde
|
Copter: switch to LOITER when exiting mission
|
2013-08-15 13:09:57 +09:00 |
compat.h
|
Copter LEDs: replace bitRead with bitmask
|
2013-04-01 13:10:12 +09:00 |
compat.pde
|
Copter: remove DigitalReadFast
|
2013-05-20 11:29:34 +09:00 |
config.h
|
Copter: increase default battery capacity to 3500mAh
|
2013-09-15 11:54:07 +09:00 |
config_channels.h
|
ArduCopter: remove unnecessary references to CH_CAM_PITCH, CH_CAM_ROLL, CH_CAM_YAW
|
2012-09-02 12:47:27 +09:00 |
control_modes.pde
|
Copter: integrate sprayer pump test
|
2013-09-11 17:05:25 +09:00 |
defines.h
|
Copter: AUTO ch7/ch8 option
|
2013-08-19 18:09:23 +09:00 |
events.pde
|
Copter: comment update re low battery event
|
2013-09-12 22:41:28 +09:00 |
failsafe.pde
|
Copter: add compassmot to cli
|
2013-03-02 17:54:18 +09:00 |
fence.pde
|
Copter: add SPORT mode
|
2013-08-05 21:04:41 +09:00 |
flip.pde
|
Copter: remove manual_attitude and throttle flags
|
2013-09-09 10:44:53 +09:00 |
inertia.pde
|
Copter: cleanup some bit if tests to be clearer
|
2013-04-23 23:03:34 +10:00 |
leds.pde
|
Copter: updates for new notify API
|
2013-08-30 13:01:35 +10:00 |
motors.pde
|
Copter: allow Vcc checks on Pixhawk
|
2013-09-12 13:43:06 +10:00 |
navigation.pde
|
Copter: move init of global nav variables to set_nav_mode
|
2013-09-09 10:37:44 +09:00 |
nocore.inoflag
|
ArduCopter: add nocore.inoflag and Arduino.h
|
2012-12-20 14:51:40 +11:00 |
perf_info.pde
|
ArduCopter: performance monitoring - changed loop counters to uint16_t.
|
2012-11-19 11:55:47 +09:00 |
position_vector.pde
|
Copter: use const references for Vector3f parameters
|
2013-08-05 10:24:24 +10:00 |
radio.pde
|
Copter: removed calls to set motor's max throttle
|
2013-09-12 22:28:38 +09:00 |
read_me.text
|
renamed top level directories
|
2011-09-09 11:27:41 +10:00 |
sensors.pde
|
Copter: comment update re low battery event
|
2013-09-12 22:41:28 +09:00 |
setup.pde
|
Copter: integrate Toshiba_LED_PX4
|
2013-08-30 13:01:35 +10:00 |
system.pde
|
Copter: remove redundant reset_i_all from startup
|
2013-09-13 12:30:25 +09:00 |
test.pde
|
Copter: remove cli eprom dump
|
2013-09-15 11:44:53 +09:00 |
toy.pde
|
Copter: more constrain fixes
|
2013-04-22 13:26:49 +10:00 |