ardupilot/ArduCopter/events.pde

293 lines
9.6 KiB
Plaintext

// -*- tab-width: 4; Mode: C++; c-basic-offset: 4; indent-tabs-mode: nil -*-
/*
* This event will be called when the failsafe changes
* boolean failsafe reflects the current state
*/
static void failsafe_radio_on_event()
{
// if motors are not armed there is nothing to do
if( !motors.armed() ) {
return;
}
// This is how to handle a failsafe.
switch(control_mode) {
case STABILIZE:
case ACRO:
case SPORT:
// if throttle is zero disarm motors
if (g.rc_3.control_in == 0) {
init_disarm_motors();
}else if(g.failsafe_throttle == FS_THR_ENABLED_ALWAYS_LAND) {
// if failsafe_throttle is 3 (i.e. FS_THR_ENABLED_ALWAYS_LAND) land immediately
set_mode(LAND);
}else if(GPS_ok() && home_distance > wp_nav.get_waypoint_radius()) {
if (!set_mode(RTL)) {
set_mode(LAND);
}
}else{
// We have no GPS or are very close to home so we will land
set_mode(LAND);
}
break;
case AUTO:
// failsafe_throttle is 1 do RTL, 2 means continue with the mission
if (g.failsafe_throttle == FS_THR_ENABLED_ALWAYS_RTL) {
if(GPS_ok() && home_distance > wp_nav.get_waypoint_radius()) {
if (!set_mode(RTL)) {
set_mode(LAND);
}
}else{
// We are very close to home so we will land
set_mode(LAND);
}
}else if(g.failsafe_throttle == FS_THR_ENABLED_ALWAYS_LAND) {
// if failsafe_throttle is 3 (i.e. FS_THR_ENABLED_ALWAYS_LAND) land immediately
set_mode(LAND);
}
// if failsafe_throttle is 2 (i.e. FS_THR_ENABLED_CONTINUE_MISSION) no need to do anything
break;
case LAND:
// continue to land if battery failsafe is also active otherwise fall through to default handling
if (g.failsafe_battery_enabled && ap.low_battery) {
break;
}
default:
if(g.failsafe_throttle == FS_THR_ENABLED_ALWAYS_LAND) {
// if failsafe_throttle is 3 (i.e. FS_THR_ENABLED_ALWAYS_LAND) land immediately
set_mode(LAND);
}else if(GPS_ok() && home_distance > wp_nav.get_waypoint_radius()) {
if (!set_mode(RTL)){
set_mode(LAND);
}
}else{
// We have no GPS or are very close to home so we will land
set_mode(LAND);
}
break;
}
// log the error to the dataflash
Log_Write_Error(ERROR_SUBSYSTEM_FAILSAFE_RADIO, ERROR_CODE_FAILSAFE_OCCURRED);
}
// failsafe_off_event - respond to radio contact being regained
// we must be in AUTO, LAND or RTL modes
// or Stabilize or ACRO mode but with motors disarmed
static void failsafe_radio_off_event()
{
// no need to do anything except log the error as resolved
// user can now override roll, pitch, yaw and throttle and even use flight mode switch to restore previous flight mode
Log_Write_Error(ERROR_SUBSYSTEM_FAILSAFE_RADIO, ERROR_CODE_FAILSAFE_RESOLVED);
}
static void low_battery_event(void)
{
// failsafe check
if (g.failsafe_battery_enabled && !ap.low_battery && motors.armed()) {
switch(control_mode) {
case STABILIZE:
case ACRO:
case SPORT:
// if throttle is zero disarm motors
if (g.rc_3.control_in == 0) {
init_disarm_motors();
}else{
set_mode(LAND);
}
break;
case AUTO:
// set_mode to RTL or LAND
if (GPS_ok() && home_distance > wp_nav.get_waypoint_radius()) {
if (!set_mode(RTL)) {
set_mode(LAND);
}
}else{
// We have no GPS or are very close to home so we will land
set_mode(LAND);
}
break;
default:
set_mode(LAND);
break;
}
}
// set the low battery flag
set_low_battery(true);
// warn the ground station and log to dataflash
gcs_send_text_P(SEVERITY_LOW,PSTR("Low Battery!"));
Log_Write_Error(ERROR_SUBSYSTEM_FAILSAFE_BATT, ERROR_CODE_FAILSAFE_OCCURRED);
#if COPTER_LEDS == ENABLED
piezo_on();
#endif // COPTER_LEDS
}
// failsafe_gps_check - check for gps failsafe
static void failsafe_gps_check()
{
uint32_t last_gps_update_ms;
// return immediately if gps failsafe is disabled
if( !g.failsafe_gps_enabled ) {
return;
}
// calc time since last gps update
last_gps_update_ms = millis() - g_gps->last_fix_time;
// check if all is well
if( last_gps_update_ms < FAILSAFE_GPS_TIMEOUT_MS) {
// check for recovery from gps failsafe
if( ap.failsafe_gps ) {
failsafe_gps_off_event();
set_failsafe_gps(false);
}
return;
}
// do nothing if gps failsafe already triggered or motors disarmed
if( ap.failsafe_gps || !motors.armed()) {
return;
}
// GPS failsafe event has occured
// update state, warn the ground station and log to dataflash
set_failsafe_gps(true);
gcs_send_text_P(SEVERITY_LOW,PSTR("Lost GPS!"));
Log_Write_Error(ERROR_SUBSYSTEM_FAILSAFE_GPS, ERROR_CODE_FAILSAFE_OCCURRED);
// take action based on flight mode
if(mode_requires_GPS(control_mode))
set_mode(LAND);
// land if circular fence is enabled
#if AC_FENCE == ENABLED
if((fence.get_enabled_fences() & AC_FENCE_TYPE_CIRCLE) != 0) {
set_mode(LAND);
}
#endif
}
// failsafe_gps_off_event - actions to take when GPS contact is restored
static void failsafe_gps_off_event(void)
{
// log recovery of GPS in logs?
Log_Write_Error(ERROR_SUBSYSTEM_FAILSAFE_GPS, ERROR_CODE_FAILSAFE_RESOLVED);
}
// failsafe_gcs_check - check for ground station failsafe
static void failsafe_gcs_check()
{
uint32_t last_gcs_update_ms;
// return immediately if gcs failsafe is disabled, gcs has never been connected or we are not overriding rc controls from the gcs
if( g.failsafe_gcs == FS_GCS_DISABLED || last_heartbeat_ms == 0 || !ap.rc_override_active) {
return;
}
// calc time since last gcs update
last_gcs_update_ms = millis() - last_heartbeat_ms;
// check if all is well
if( last_gcs_update_ms < FS_GCS_TIMEOUT_MS) {
// check for recovery from gcs failsafe
if( ap.failsafe_gcs ) {
failsafe_gcs_off_event();
set_failsafe_gcs(false);
}
return;
}
// do nothing if gcs failsafe already triggered or motors disarmed
if( ap.failsafe_gcs || !motors.armed()) {
return;
}
// GCS failsafe event has occured
// update state, log to dataflash
set_failsafe_gcs(true);
Log_Write_Error(ERROR_SUBSYSTEM_FAILSAFE_GCS, ERROR_CODE_FAILSAFE_OCCURRED);
// This is how to handle a failsafe.
// use the throttle failsafe setting to decide what to do
switch(control_mode) {
case STABILIZE:
case ACRO:
case SPORT:
// if throttle is zero disarm motors
if (g.rc_3.control_in == 0) {
init_disarm_motors();
}else if(GPS_ok() && home_distance > wp_nav.get_waypoint_radius()) {
if (!set_mode(RTL)) {
set_mode(LAND);
}
}else{
// We have no GPS or are very close to home so we will land
set_mode(LAND);
}
break;
case AUTO:
// if g.failsafe_gcs is 1 do RTL, 2 means continue with the mission
if (g.failsafe_gcs == FS_GCS_ENABLED_ALWAYS_RTL) {
if (GPS_ok() && home_distance > wp_nav.get_waypoint_radius()) {
if (!set_mode(RTL)) {
set_mode(LAND);
}
}else{
// We are very close to home so we will land
set_mode(LAND);
}
}
// if failsafe_throttle is 2 (i.e. FS_THR_ENABLED_CONTINUE_MISSION) no need to do anything
break;
default:
if(GPS_ok() && home_distance > wp_nav.get_waypoint_radius()) {
if (!set_mode(RTL)) {
set_mode(LAND);
}
}else{
// We have no GPS or are very close to home so we will land
set_mode(LAND);
}
break;
}
}
// failsafe_gcs_off_event - actions to take when GCS contact is restored
static void failsafe_gcs_off_event(void)
{
// log recovery of GCS in logs?
Log_Write_Error(ERROR_SUBSYSTEM_FAILSAFE_GCS, ERROR_CODE_FAILSAFE_RESOLVED);
}
static void update_events() // Used for MAV_CMD_DO_REPEAT_SERVO and MAV_CMD_DO_REPEAT_RELAY
{
if(event_repeat == 0 || (millis() - event_timer) < event_delay)
return;
if(event_repeat != 0) { // event_repeat = -1 means repeat forever
event_timer = millis();
if (event_id >= CH_5 && event_id <= CH_8) {
if(event_repeat%2) {
hal.rcout->write(event_id, event_value); // send to Servos
} else {
hal.rcout->write(event_id, event_undo_value);
}
}
if (event_id == RELAY_TOGGLE) {
relay.toggle();
}
if (event_repeat > 0) {
event_repeat--;
}
}
}