ardupilot/ArduCopter
Randy Mackay 1dcf58bc20 Copter: support set-home-position message 2015-10-03 12:51:32 +09:00
..
.gitignore Improvements to cmake. 2011-09-29 21:23:26 -04:00
APM_Config.h Copter: integrate Precision Landing lib 2015-08-31 18:00:28 +09:00
APM_Config_mavlink_hil.h Copter: remove unused definition 2015-06-28 21:55:31 +09:00
AP_State.cpp Copter: fix severity of super simple message to GCS 2015-09-12 12:35:42 +09:00
ArduCopter.cpp Copter: Adding Logging of RSSI data. 2015-09-16 16:41:43 +09:00
Attitude.cpp Copter: check_ekf_yaw_reset uses ahrs method 2015-09-24 16:57:47 +09:00
Copter.cpp Copter: fix init order of ekfYawReset_ms 2015-09-24 16:57:50 +09:00
Copter.h Copter: fixed deadzone handling for external tail gyro 2015-09-25 12:05:43 +10:00
GCS_Mavlink.cpp Copter: support set-home-position message 2015-10-03 12:51:32 +09:00
Log.cpp Copter: ensure 10% free space when initialising logging 2015-09-09 12:22:36 +10:00
Makefile ArduCopter Makefile: Don't include targets.mk directly (included by apm.mk) 2013-01-09 13:15:38 -08:00
Parameters.cpp Copter: added EK2_* parameters and EKF2 instance 2015-09-23 11:56:33 +10:00
Parameters.h Copter: added EK2_* parameters and EKF2 instance 2015-09-23 11:56:33 +10:00
Parameters.pde Copter: added blank Parameters.pde for MissionPlanner 2015-05-30 15:21:31 +09:00
ReleaseNotes.txt Copter: 3.3 release notes 2015-09-29 10:25:43 +09:00
UserCode.cpp Copter: finished conversion to .cpp files 2015-05-30 15:21:19 +09:00
UserVariables.h Copter: minor user hooks cleanup 2013-05-17 12:19:07 +09:00
capabilities.cpp Copter: update flighttermination capability 2015-08-17 17:15:50 +09:00
commands.cpp Copter: send home position when home is set or get-home msg received 2015-10-03 12:50:45 +09:00
commands_logic.cpp Copter: Support do_digicam_x via command_long 2015-09-16 13:06:49 +09:00
compassmot.cpp Copter: make Copter use milligauss 2015-09-09 10:38:16 +10:00
compat.cpp Copter: finished conversion to .cpp files 2015-05-30 15:21:19 +09:00
config.h Copter: replace vehicle compass consistency check 2015-09-16 15:13:38 +09:00
config_channels.h ArduCopter: remove unnecessary references to CH_CAM_PITCH, CH_CAM_ROLL, CH_CAM_YAW 2012-09-02 12:47:27 +09:00
control_acro.cpp Copter: slow start motors after landing in Stabilize, Acro 2015-07-28 15:16:24 +09:00
control_althold.cpp Copter: AltHold limits lean angle to maintain altitude 2015-09-07 15:10:12 +09:00
control_auto.cpp Copter: change multirotor comments to multicopter 2015-07-21 16:26:25 +09:00
control_autotune.cpp Copter: AltHold limits lean angle to maintain altitude 2015-09-07 15:10:12 +09:00
control_brake.cpp Copter: change multirotor comments to multicopter 2015-07-21 16:26:25 +09:00
control_circle.cpp Copter: change multirotor comments to multicopter 2015-07-21 16:26:25 +09:00
control_drift.cpp Copter: AltHold limits lean angle to maintain altitude 2015-09-07 15:10:12 +09:00
control_flip.cpp Copter: finished conversion to .cpp files 2015-05-30 15:21:19 +09:00
control_guided.cpp Copter: guided mode vel controller integrates althold lean limit 2015-09-07 15:10:13 +09:00
control_land.cpp Copter: AltHold limits lean angle to maintain altitude 2015-09-07 15:10:12 +09:00
control_loiter.cpp Copter: change multirotor comments to multicopter 2015-07-21 16:26:25 +09:00
control_poshold.cpp Copter: AltHold limits lean angle to maintain altitude 2015-09-07 15:10:12 +09:00
control_rtl.cpp Copter: bug fix to RTL_ALT_MIN feature 2015-08-08 15:38:47 +09:00
control_sport.cpp Copter: log sonar_alt even when disabled 2015-06-17 12:46:55 +10:00
control_stabilize.cpp Copter: AltHold limits lean angle to maintain altitude 2015-09-07 15:10:12 +09:00
crash_check.cpp Copter: added FS_CRASH_CHECK parameter 2015-08-31 12:15:46 +10:00
defines.h Copter: add Precision Landing log message 2015-08-31 18:00:30 +09:00
ekf_check.cpp Copter: update send text severities 2015-08-25 14:05:25 +09:00
esc_calibration.cpp Copter: update send text severities 2015-08-25 14:05:25 +09:00
events.cpp Copter: update send text severities 2015-08-25 14:05:25 +09:00
failsafe.cpp Copter: finished conversion to .cpp files 2015-05-30 15:21:19 +09:00
fence.cpp Copter: check fence when disarmed 2015-07-08 15:27:57 +09:00
flight_mode.cpp Copter: tell motors library when to use acro gyro gain 2015-09-25 12:30:34 +10:00
heli.cpp Copter: consider flight to be dynamic at greater than 2m above ground 2015-09-25 12:30:34 +10:00
heli_control_acro.cpp Copter: tell motors library when to use acro gyro gain 2015-09-25 12:30:34 +10:00
heli_control_stabilize.cpp Copter: AltHold limits lean angle to maintain altitude 2015-09-07 15:10:12 +09:00
inertia.cpp Copter: finished conversion to .cpp files 2015-05-30 15:21:19 +09:00
land_detector.cpp Copter: keep thr-mix at min when landed 2015-09-07 18:10:25 +09:00
landing_gear.cpp Copter: finished conversion to .cpp files 2015-05-30 15:21:19 +09:00
leds.cpp Copter: finished conversion to .cpp files 2015-05-30 15:21:19 +09:00
make.inc Copter: added EK2_* parameters and EKF2 instance 2015-09-23 11:56:33 +10:00
motor_test.cpp Copter: update send text severities 2015-08-25 14:05:25 +09:00
motors.cpp Copter: pass display_failure to AP_Motors heli check 2015-09-25 12:30:34 +10:00
navigation.cpp Copter: fix home_distance calculation 2015-07-08 15:27:59 +09:00
nocore.inoflag ArduCopter: add nocore.inoflag and Arduino.h 2012-12-20 14:51:40 +11:00
perf_info.cpp Copter: finished conversion to .cpp files 2015-05-30 15:21:19 +09:00
position_vector.cpp Copter: finished conversion to .cpp files 2015-05-30 15:21:19 +09:00
precision_landing.cpp Copter: precision landing uses sonar alt if available 2015-09-11 20:56:09 +09:00
radio.cpp Copter: no set_hover_throttle for TradHeli 2015-07-21 16:26:07 +09:00
readme.txt Copter: readme file renamed and directs to wiki 2014-02-12 21:03:45 +09:00
sensors.cpp Copter: add compass_cal update function 2015-09-03 16:59:12 +10:00
setup.cpp Copter: make Copter use milligauss 2015-09-09 10:38:16 +10:00
switches.cpp Copter: update send text severities 2015-08-25 14:05:25 +09:00
system.cpp Copter: calibrate gyros depending on INS GYR_CAL parameter 2015-09-21 17:06:34 +09:00
takeoff.cpp Copter: fix do_user_takeoff indentation 2015-07-14 20:16:57 +09:00
test.cpp Copter: calibrate gyros depending on INS GYR_CAL parameter 2015-09-21 17:06:34 +09:00
tuning.cpp Copter: Ch6 circle rate as float 2015-07-23 16:21:23 +09:00

readme.txt

ArduCopter README

User Manual: http://copter.ardupilot.com/
Developer Manual: http://dev.ardupilot.com/