.. |
.gitignore
|
Improvements to cmake.
|
2011-09-29 21:23:26 -04:00 |
APM_Config.h
|
Copter: enable AUTOTUNE for mission planner build
|
2013-10-13 11:57:50 +09:00 |
APM_Config_mavlink_hil.h
|
uncrustify ArduCopter/APM_Config_mavlink_hil.h
|
2012-08-21 18:56:56 -07:00 |
AP_State.pde
|
Copter: rename low_battery to failsafe.battery
|
2013-10-13 13:52:52 +09:00 |
ArduCopter.pde
|
Copter: rename low_battery to failsafe.battery
|
2013-10-13 13:52:52 +09:00 |
Attitude.pde
|
Copter: autotune disables rate output from stab controller
|
2013-10-13 11:56:01 +09:00 |
GCS.h
|
Copter: added support for partial mission load
|
2013-05-29 16:25:05 +10:00 |
GCS_Mavlink.pde
|
Copter: rename low_battery to failsafe.battery
|
2013-10-13 13:52:52 +09:00 |
Log.pde
|
Copter: make AutoTune a compile-time option
|
2013-10-04 15:50:50 +09:00 |
Makefile
|
ArduCopter Makefile: Don't include targets.mk directly (included by apm.mk)
|
2013-01-09 13:15:38 -08:00 |
Parameters.h
|
Copter: comments update for GPS_HDOP_GOOD parameter
|
2013-10-13 13:53:26 +09:00 |
Parameters.pde
|
Copter: comments update for GPS_HDOP_GOOD parameter
|
2013-10-13 13:53:26 +09:00 |
ReleaseNotes.txt
|
Copter: update firmware version to AC3.1-rc3
|
2013-10-09 11:13:15 +09:00 |
UserCode.pde
|
Copter: minor user hooks cleanup
|
2013-05-17 12:19:07 +09:00 |
UserVariables.h
|
Copter: minor user hooks cleanup
|
2013-05-17 12:19:07 +09:00 |
auto_tune.pde
|
Copter: autotune disables rate output from stab controller
|
2013-10-13 11:56:01 +09:00 |
command_description.txt
|
Cleanup: rename files with spaces in their names, replace with underscores
|
2012-02-28 16:14:31 -08:00 |
commands.pde
|
Copter: remove old comments
|
2013-09-24 21:45:43 +09:00 |
commands_logic.pde
|
Copter: support MAV_CMD_DO_SET_CAM_TRIGG_DIST
|
2013-10-11 21:40:57 +11:00 |
commands_process.pde
|
Copter: remove old comments
|
2013-09-24 21:45:43 +09:00 |
compat.h
|
Copter LEDs: replace bitRead with bitmask
|
2013-04-01 13:10:12 +09:00 |
compat.pde
|
Copter: make compat functions static
|
2013-09-23 18:10:22 +10:00 |
config.h
|
Copter: enable AUTOTUNE for mission planner build
|
2013-10-13 11:57:50 +09:00 |
config_channels.h
|
ArduCopter: remove unnecessary references to CH_CAM_PITCH, CH_CAM_ROLL, CH_CAM_YAW
|
2012-09-02 12:47:27 +09:00 |
control_modes.pde
|
Copter: remove unused flags and consolidate ap and ap_system
|
2013-10-08 15:25:14 +09:00 |
defines.h
|
AutoTune: abandon tuning if rate P hits minimum
|
2013-10-09 13:35:43 +09:00 |
events.pde
|
Copter: rename low_battery to failsafe.battery
|
2013-10-13 13:52:52 +09:00 |
failsafe.pde
|
Copter: updates for AP_HAL::MemberProc
|
2013-09-30 21:06:43 +10:00 |
fence.pde
|
Copter: move failsafe flags into structure
|
2013-09-26 19:37:15 +09:00 |
flip.pde
|
Copter: remove manual_attitude and throttle flags
|
2013-09-09 10:44:53 +09:00 |
inertia.pde
|
Copter: cleanup some bit if tests to be clearer
|
2013-04-23 23:03:34 +10:00 |
leds.pde
|
Copter: rename low_battery to failsafe.battery
|
2013-10-13 13:52:52 +09:00 |
motors.pde
|
Copter: add GPS glitch to arming checks
|
2013-10-13 14:04:54 +09:00 |
navigation.pde
|
Copter: simple mode speedup
|
2013-10-05 18:26:56 +09:00 |
nocore.inoflag
|
ArduCopter: add nocore.inoflag and Arduino.h
|
2012-12-20 14:51:40 +11:00 |
perf_info.pde
|
ArduCopter: performance monitoring - changed loop counters to uint16_t.
|
2012-11-19 11:55:47 +09:00 |
position_vector.pde
|
Copter: use const references for Vector3f parameters
|
2013-08-05 10:24:24 +10:00 |
radio.pde
|
Copter: remove unused flags and consolidate ap and ap_system
|
2013-10-08 15:25:14 +09:00 |
read_me.text
|
renamed top level directories
|
2011-09-09 11:27:41 +10:00 |
sensors.pde
|
Copter: rename low_battery to failsafe.battery
|
2013-10-13 13:52:52 +09:00 |
setup.pde
|
Copter: integrate BattMonitor
|
2013-10-03 11:16:28 +09:00 |
system.pde
|
Copter: reduce timer speed to 500 on APM2
|
2013-10-13 11:03:41 +09:00 |
test.pde
|
Copter: split up medium loop
|
2013-10-13 11:03:15 +09:00 |
toy.pde
|
Copter: split up medium loop
|
2013-10-13 11:03:15 +09:00 |