Randy Mackay 91b78c0cbe Copter: bug fix for duplicate single and coax params		2014-02-07 17:07:51 +09:00
..
.gitignore	Improvements to cmake.	2011-09-29 21:23:26 -04:00
APM_Config.h	Copter: add coax heli support	2014-02-07 12:36:04 +09:00
APM_Config_mavlink_hil.h	Copter: added SERIAL2_BAUD and rename SERIAL3_BAUD to SERIAL1_BAUD	2013-11-26 13:05:32 +11:00
AP_State.pde	Copter: ARMING_CHECK made into bitmask	2013-11-15 17:13:56 +09:00
ArduCopter.pde	Copter: removed unused servo3, servo4 from coax	2014-02-07 12:36:17 +09:00
Attitude.pde	Copter: landing_complete stays true until thr is raised	2014-01-22 14:38:35 +09:00
GCS_Mavlink.pde	Copter: add coax heli support	2014-02-07 12:36:04 +09:00
Log.pde	Copter: log PX4 and NuttX versions in logs	2014-01-14 15:38:51 +11:00
Makefile	ArduCopter Makefile: Don't include targets.mk directly (included by apm.mk)	2013-01-09 13:15:38 -08:00
Parameters.h	Copter: removed unused servo3, servo4 from coax	2014-02-07 12:36:17 +09:00
Parameters.pde	Copter: bug fix for duplicate single and coax params	2014-02-07 17:07:51 +09:00
ReleaseNotes.txt	Copter: firmware to AC3.1.2-rc1	2014-01-30 14:00:20 +09:00
UserCode.pde	Copter: minor user hooks cleanup	2013-05-17 12:19:07 +09:00
UserVariables.h	Copter: minor user hooks cleanup	2013-05-17 12:19:07 +09:00
auto_tune.pde	Copter: reduce autotune min rate D to 0.002	2013-12-09 14:17:31 +09:00
command_description.txt	Cleanup: rename files with spaces in their names, replace with underscores	2012-02-28 16:14:31 -08:00
commands.pde	Copter: remove old comments	2013-09-24 21:45:43 +09:00
commands_logic.pde	Copter: converted to AP_ServoRelayEvents	2014-01-20 17:06:29 +11:00
commands_process.pde	Copter: reject change_command if not in AUTO	2013-11-14 13:49:37 +09:00
compat.h	Copter LEDs: replace bitRead with bitmask	2013-04-01 13:10:12 +09:00
compat.pde	Copter: remove unused compat.pde entries	2014-01-30 14:33:55 +09:00
config.h	Copter: remove dup definition of FRAME_ORIENTATION	2014-01-21 21:44:17 +09:00
config_channels.h	ArduCopter: remove unnecessary references to CH_CAM_PITCH, CH_CAM_ROLL, CH_CAM_YAW	2012-09-02 12:47:27 +09:00
control_modes.pde	Copter: Added GCS feedback for save_trim()	2014-01-16 14:23:19 +09:00
crash_check.pde	Copter: add alt and throttle checks to crash detector	2013-10-30 13:33:09 +09:00
defines.h	Copter: add coax heli support	2014-02-07 12:36:04 +09:00
drift.pde	Copter: Drift updates control_roll, pitch	2013-11-30 18:06:56 +09:00
events.pde	Copter: converted to AP_ServoRelayEvents	2014-01-20 17:06:29 +11:00
failsafe.pde	Copter: updates for AP_HAL::MemberProc	2013-09-30 21:06:43 +10:00
fence.pde	Copter: GPS ok only when not glitching	2013-11-11 22:24:18 +09:00
flip.pde	TradHeli: add THROTTLE_MANUAL_HELI	2013-11-15 22:57:53 +09:00
heli.pde	Copter: remove PID logging	2014-01-13 17:23:39 +09:00
inertia.pde	Copter: combine NTUN and INAV dataflash msgs	2014-01-13 22:00:11 +09:00
leds.pde	Copter: remove CopterLED from main code	2013-11-30 18:20:55 +09:00
motors.pde	Copter: coax allows ch5 and higher for do_set_servo cmd	2014-02-07 12:36:22 +09:00
navigation.pde	Copter: combine nav_roll and control_roll	2013-11-27 23:11:30 +09:00
nocore.inoflag	ArduCopter: add nocore.inoflag and Arduino.h	2012-12-20 14:51:40 +11:00
perf_info.pde	ArduCopter: performance monitoring - changed loop counters to uint16_t.	2012-11-19 11:55:47 +09:00
position_vector.pde	Copter/position_vector: remove const specifiers on objects returned by	2013-10-27 13:41:46 +09:00
radio.pde	Copter: moved coax servo set-up to AP_MotorCoax	2014-02-07 12:36:11 +09:00
read_me.text	renamed top level directories	2011-09-09 11:27:41 +10:00
sensors.pde	Copter: faster baro calibration when arming	2014-01-15 23:28:24 +09:00
setup.pde	Copter: remove frame setup through CLI	2014-01-21 21:42:59 +09:00
system.pde	Copter: converted to AP_ServoRelayEvents	2014-01-20 17:06:29 +11:00
test.pde	Copter: fix compiler warning from motorsync test	2014-01-26 11:08:34 +09:00