ardupilot/ArduPlane
Andrew Tridgell 4cf509a693 Plane: fixed EKF3 logging 2016-12-19 08:07:14 +11:00
..
APM_Config.h Global: remove mode line from headers 2016-10-24 09:42:01 -02:00
APM_Config.h.reference ArduPlane: Fix typos 2016-05-13 19:20:07 -03:00
ArduPlane.cpp Plane: convert landing.complete to landing.is_complete() 2016-12-14 04:32:30 -08:00
Attitude.cpp Global: remove mode line from headers 2016-10-24 09:42:01 -02:00
GCS_Mavlink.cpp Plane: abstract land abort request method 2016-12-14 04:32:30 -08:00
GCS_Mavlink.h Plane: update sensor status error flags independently of sending a sys_status message 2016-11-02 08:36:58 +11:00
Log.cpp Plane: fixed EKF3 logging 2016-12-19 08:07:14 +11:00
Makefile Plane: cleanup cruft in Makefile 2013-10-13 21:41:01 +11:00
Makefile.waf waf: use single entry point for make wrappers 2015-12-10 10:40:34 +09:00
Parameters.cpp ArduPlane: Add EKF3 and remove EKF1 2016-12-19 08:07:09 +11:00
Parameters.h ArduPlane: Add EKF3 and remove EKF1 2016-12-19 08:07:09 +11:00
Parameters.pde Plane: added blank Parameters.pde for MissionPlanner 2015-05-30 15:21:33 +09:00
Plane.cpp Global: remove mode line from headers 2016-10-24 09:42:01 -02:00
Plane.h ArduPlane: Add EKF3 and remove EKF1 2016-12-19 08:07:09 +11:00
afs_plane.cpp Global: remove mode line from headers 2016-10-24 09:42:01 -02:00
altitude.cpp Plane: use a common reset for uniform landing wipe 2016-12-14 04:32:30 -08:00
arming_checks.cpp Plane: add arming check for logging actually started 2016-11-29 15:14:09 -08:00
avoidance_adsb.cpp Plane: Move auto_state variables to AP_landing members 2016-11-25 19:07:30 -08:00
avoidance_adsb.h Plane: add Avoid_ADSB support to plane 2016-08-17 22:38:54 -07:00
capabilities.cpp Plane: Add compass cal capability bit 2016-12-04 19:17:01 -08:00
commands.cpp Global: remove mode line from headers 2016-10-24 09:42:01 -02:00
commands_logic.cpp Plane: use a common reset for uniform landing wipe 2016-12-14 04:32:30 -08:00
config.h Plane: remove define RANGEFINDER_ENABLED - always enabled 2016-11-25 19:07:30 -08:00
control_modes.cpp Global: remove mode line from headers 2016-10-24 09:42:01 -02:00
createTags ArduPlane: remove mention to .pde files 2016-05-07 22:55:48 -03:00
defines.h Global: remove mode line from headers 2016-10-24 09:42:01 -02:00
events.cpp Global: remove mode line from headers 2016-10-24 09:42:01 -02:00
failsafe.cpp Global: remove mode line from headers 2016-10-24 09:42:01 -02:00
geofence.cpp Plane: To nullptr from NULL. 2016-10-29 10:32:05 -03:00
is_flying.cpp Plane: move various g params to aparms 2016-11-25 19:07:30 -08:00
make.inc make.inc: Add EKF3 and remove EKF1 library from make.inc files 2016-12-19 08:07:10 +11:00
motor_test.cpp Global: remove mode line from headers 2016-10-24 09:42:01 -02:00
navigation.cpp Plane: fix suppressing comment for case fall through 2016-12-14 13:22:15 +09:00
parachute.cpp Global: remove mode line from headers 2016-10-24 09:42:01 -02:00
px4_mixer.cpp Plane: Change from printf statement to print, println statement. 2016-11-25 15:57:15 -08:00
quadplane.cpp Plane : quadplane change to float to avoid the loss of a fractional part 2016-12-05 12:39:31 -08:00
quadplane.h Global: remove mode line from headers 2016-10-24 09:42:01 -02:00
radio.cpp Plane: move various g params to aparms 2016-11-25 19:07:30 -08:00
release-notes.txt Plane: updated release notes for 3.7.1 2016-10-21 13:15:51 +11:00
sensors.cpp Plane: remove define RANGEFINDER_ENABLED - always enabled 2016-11-25 19:07:30 -08:00
servos.cpp Plane: convert landing.complete to landing.is_complete() 2016-12-14 04:32:30 -08:00
setup.cpp Plane: Change from printf statement to print, println statement. 2016-11-25 15:57:15 -08:00
system.cpp Plane: use a common reset for uniform landing wipe 2016-12-14 04:32:30 -08:00
takeoff.cpp Plane: move various g params to aparms 2016-11-25 19:07:30 -08:00
test.cpp Plane: Change from printf statement to print, println statement. 2016-11-25 15:57:15 -08:00
tiltrotor.cpp Global: remove mode line from headers 2016-10-24 09:42:01 -02:00
tuning.cpp Plane: To nullptr from NULL. 2016-10-29 10:32:05 -03:00
tuning.h Global: remove mode line from headers 2016-10-24 09:42:01 -02:00
version.h Plane: update version to 3.8.0beta1 2016-10-21 13:16:36 +11:00
wscript Plane: add AP_Beacon to build 2016-11-30 17:56:59 +09:00