Commit Graph

498 Commits

Author SHA1 Message Date
Michael Oborne
bb50bc3fc5 APM Planner 1.1.60
add stab kd ch6
fix mono/linux serial port list
2012-04-04 06:58:45 +08:00
Andrew Tridgell
d60126fc1f autotest: fixed overshoot due to low resolution log timing 2012-04-03 10:43:05 +10:00
Andrew Tridgell
abd33dd914 autotest: fixed order of startup messages 2012-04-03 09:53:26 +10:00
Andrew Tridgell
3b3f9d8b17 autotest: use the automatic declination code in autotest 2012-03-30 14:25:27 +11:00
Andrew Tridgell
22ff8cb197 examples: fixed build of some examples with new AP_Declination code 2012-03-30 14:25:27 +11:00
Michael Oborne
cc047f2944 APM Planner 1.1.59
fix possible issue loading stream rates
fix tracker ranges
add more ch6 options
modify mag calib with throttle
2012-03-30 06:17:06 +08:00
Michael Oborne
c1eede5ef3 firmware build 2012-03-29 09:53:56 +08:00
Andrew Tridgell
c084a72723 pysim: ensure Vector3() uses floats 2012-03-29 12:39:53 +11:00
Michael Oborne
40fcfa294f APM Planner 1.1.58
add read delay on write for serial
add tlog to gpx creation
fix issue 583 - georef image with a tlog
2012-03-28 20:45:16 +08:00
Michael Oborne
8a645ffb56 firmware build 2012-03-27 13:16:48 +08:00
Michael Oborne
12e9d1d6fc APM Planner 1.1.57
fix antenna tracker issue with saved settings
add pretyping to config list
add rawlogs
modify mavlink log graph interface. 2 x yaxis & roll,pitch,yaw now in degs
update dataflash log format - thanks randy
update google earth interface refresh to 0.3 sec
2012-03-26 18:21:49 +08:00
Michael Oborne
7cb2c1de65 firmware build 2012-03-25 08:27:31 +08:00
Michael Oborne
7c2f3a0c21 firmware build 2012-03-25 08:22:09 +08:00
Michael Oborne
ee4803c12d APM Planner 1.1.56
add ardutracker support
add load/save setting in Tracker
move getserialports to serial class
hopefully fix dtr issue for good.
2012-03-23 20:52:12 +08:00
Andrew Tridgell
0f6e7a1449 pysim: implement partial 3D acceleration support
The simulator flies very badly when using the full acceleration
code. I don't yet know if this is a bug in the simulation or a problem
with AHRS not handling acceleration for multicopters.

For now set the acceleration to be half a 'pure gravity' acceleration
and half from the full 3D calculation.
2012-03-23 16:48:52 +11:00
Andrew Tridgell
f1acdb13c2 pysim: added experimental acceleration support 2012-03-23 16:48:52 +11:00
Andrew Tridgell
5f3e2cf98a pysim: update the multicopter simulator with correct acceleration
this re-works the multicopter simulator in terms of rotation matrices,
and adds full acceleration support, which means it will include linear
acceleration affects and centripetal acceleration
2012-03-22 23:00:45 +11:00
Andrew Tridgell
4407f6b8ca pysim: added rotmat.py
this is a python library for rotation matrices, following the
conventions in AP_Math
2012-03-22 23:00:45 +11:00
Michael Oborne
739294ca70 APM Planner 1.1.55
fix issue 573
fix issue 572
fix issue 571
fix issue 570
fix issue 564
fix issue 560
fix issue 555
fix issue 536
add CH6_LOITER_RATE_D
fix joystick axis 5-8 - can use joystick for camera pan/tilt
2012-03-21 20:13:08 +08:00
Andrew Tridgell
9cba330eed autotest: fixed the declination to match new compass
we now use the declination for Canberra
2012-03-21 10:41:55 +11:00
Andrew Tridgell
a42b45b58c AHRS: fixed VARTest for new AHRS framework 2012-03-19 17:29:02 +11:00
Michael Oborne
ca1e78b779 APM Planner 1.1.54
change default rates to 3 hz
fix log play issue without a log loaded
fix heli setup screen
2012-03-19 07:26:20 +08:00
Andrew Tridgell
6305312be7 fixed VARTest build 2012-03-18 13:34:40 +11:00
Michael Oborne
e92763f7f3 firmware build 2012-03-18 10:32:15 +08:00
Michael Oborne
9ea7be9c9c APM Planner 1.1.53
add sensor rate telem
save autopan between sessions
modify connect hb requirement and param timeout
2012-03-18 10:29:55 +08:00
Michael Oborne
91054916c3 firmware build 2012-03-18 09:18:32 +08:00
Michael Oborne
3f62427619 firmware build 2012-03-18 09:13:49 +08:00
John Arne Birkeland
844e1c9695 ArduPPM V2.2.66
- Added APM2 (ATmega32U2) support for using TX and RX status leds to indicate PWM and PPM traffic

<RX><OFF> no pwm input detected
<RX><TOGGLE> speed of toggle indicate how many channels are active
<RX><ON> input lost (failsafe)
<TX><OFF> ppm output not started
<TX><FAST TOGGLE> normal PWM->PPM output or PPM passtrough failsafe
<TX><SLOW TOGGLE> PPM passtrough
2012-03-16 20:48:55 +01:00
Michael Oborne
bd294b3371 APM Planner 1.1.52
add mag field strength - status tab "magfield"
modify param getting.
mag calibrate error checking
hazys - capm mod
2012-03-15 07:10:31 +08:00
Hazy
39e825bb04 APM Planner
fix detection of CAPM board
2012-03-13 20:26:45 +08:00
Michael Oborne
10da3db15c APM Planner 1.1.51
revert posible camera issue
fix apc220 units rts issue
fix bluetooth comport issue - re andrew
cleanup startup test
2012-03-13 07:15:08 +08:00
Andrew Tridgell
accc5dc02f autotest: run fg viewers with less CPU priority 2012-03-10 10:34:27 +11:00
Andrew Tridgell
5e66d3cecb autotest: added CMAC test circuit
this is what I am using for noise testing
2012-03-10 10:34:27 +11:00
Michael Oborne
986f1675ad APM Planner 1.1.50
rename messagebox to custommessagebox
mag calibration now working. > hardware setup tab
2012-03-09 23:18:12 +08:00
Michael Oborne
f1d67c5638 APM Planner
Fix Updater
2012-03-07 08:01:59 +08:00
Michael Oborne
7f47640b92 APM Planner 1.1.49
mode TUNE_ param scale
add mavlink tlog graphing
mod tracker options
2012-03-06 18:27:43 +08:00
Michael Oborne
444f29410b planner cleanup 2012-03-04 08:49:45 +08:00
Michael Oborne
ba3ffb3b8b APM Planner 1.1.48
Add ThemeManager - re andrew
Add CustomMessageBox - re andrew and me
few mono fixs
mono tts working (speech)
2012-03-04 08:42:42 +08:00
Michael Oborne
0087d0533a APM Planner 1.1.47
fix Updater
2012-03-03 15:42:41 +08:00
Michael Oborne
c2fa44d24e APM Planner 1.1.46
update to request extra3 stream.
2012-03-02 18:40:20 +08:00
Michael Oborne
ee5e331f3c APM Planner 1.1.45
add tcp and udp port remeber issue 533
add udp listern wait issue 534
fix wp receive on mono part issue 530
allow logging of unknown packets mav 0.9
do_speed_change fix issue 531
remember last video res issue 521
fix issue 528 - ch 6 and ch 7 options
2012-03-01 21:27:03 +08:00
Michael Oborne
a5e3f8d324 APM Planner 1.1.44
mod antenna tracker code
add extra ch 6 options
cleanup message dialogs better
fix auto fill ch6 and ch7 mode options
add progress to upload and dl wp's
fix disconnect bug on mono
2012-02-29 21:19:54 +08:00
Pat Hickey
ff0fc26484 Cleanup: rename files with spaces in their names, replace with underscores
* Skipped /Tools/ArdupilotMegaPlanner/Resources/new...
  and /archive/Configurator/Source/Utilities/TDMS/G...
  because I don't want to mess with that.
2012-02-28 16:14:31 -08:00
Michael Oborne
57ed9fc62b APM Planner 1.1.43
Add logging system - re andrew radford
move libs
add tlog support to georef images.
experimental antenna tracking - pololu maestro
tweak "follow me" mode, better error checking
update dataflashlog format for ac2
lang change mod - re hazy
remove arduinocpp project
2012-02-27 07:13:23 +08:00
Hazy
71b73a669c APM Planner
fix CAPM update firmware error
2012-02-26 19:14:08 +08:00
Andrew Tridgell
9d6ac9032e test: updated VARTest for new AP_Param vector3f handling 2012-02-25 11:37:20 +11:00
Andrew Tridgell
57971e0ddf autotest: fixed xAccel calculation in fakepos.py 2012-02-25 11:37:20 +11:00
Michael Oborne
23cc9c6132 APM Planner 1.1.41
fix mono ssl issue
modify log download
fix param dl on arduplane 2.28 (2x nulls in param list)
fix connect cancel
mono - add more comports
more error checking on radio
2012-02-24 19:39:02 +08:00
Michael Oborne
d85596841f APM Planner 1.1.41
add NaN checking/error message
add config page shortcuts - F5, ctl-s and ctl-o
add +++ passthrough on terminal
add longer delay to log download
modify param receive process.
modify connecting and param receive process - re Andrew
2012-02-24 09:38:56 +08:00
Hazy
e3c3307c09 APM Planner
a little bit translate
2012-02-23 16:39:16 +08:00