Commit Graph

7172 Commits

Author SHA1 Message Date
Randy Mackay 93448b7138 Copter: version to 4.3.0 official 2022-10-31 12:34:40 +09:00
Randy Mackay ef03e47010 Copter: 4.3.0 release notes 2022-10-31 12:34:40 +09:00
Randy Mackay c4c4526903 Copter: version to 4.3.0-beta4 2022-10-24 22:23:32 +09:00
Randy Mackay 39a4b70f59 Copter: 4.3.0-beta4 release notes 2022-10-24 22:23:32 +09:00
Randy Mackay 553af39593 Copter: version to 4.3.0-beta3 2022-10-14 17:13:10 +09:00
Randy Mackay 69ebb6cf34 Copter: 4.3.0-beta3 release notes 2022-10-14 17:13:10 +09:00
Randy Mackay a1417a6a90 Copter: version to 4.3.0-beta2 2022-10-04 16:50:08 +09:00
Randy Mackay fcd6d34247 Copter: 4.3.0-beta2 release notes 2022-10-04 16:50:08 +09:00
Peter Barker 6cdfe13e05 ArduCopter: do not send MSG_RPM if RPM not enabled 2022-10-04 16:50:08 +09:00
Randy Mackay 8e12e51362 Copter: version to 4.3.0-beta1 2022-09-13 14:19:47 +09:00
Randy Mackay 55d0cbd2a6 Copter: 4.3.0-beta1 release notes 2022-09-13 14:19:47 +09:00
Randy Mackay d4967f5285 Copter: 4.2.3 release notes 2022-09-12 15:23:16 +09:00
Andy Piper 7d70762053 Copter: use pilot_desired_throttle rather than limit_throttle_out in stabilize and acro. 2022-09-07 17:03:03 +01:00
Iampete1 ee31f2322e Copter: takeoff rpm: define out if no ESC telem 2022-09-07 17:03:03 +01:00
Andy Piper fce1fa6752 Copter: make sure motors go through GROUND_IDLE at startup even when in air mode 2022-09-07 17:03:03 +01:00
Andy Piper 2cc9f1463e Copter: disable TKOFF_RPM_MIN on Heli 2022-09-07 17:03:03 +01:00
Randy Mackay 3f96423795 Copter: add takeoff RPM check 2022-09-07 17:03:03 +01:00
Iampete1 b59c179079 Copter: use new motors arming check 2022-09-07 17:54:16 +10:00
Randy Mackay 38665a7935 Copter: fix do-mount-control yaw scaling 2022-09-06 10:17:34 +10:00
Leonard Hall 2165d19af1 Copter: PosHold: remove unnecessary loiter_nav->update 2022-09-02 10:55:48 +09:00
Leonard Hall 57e9e599f4 Copter: Payload Place: Improve touchdown test 2022-09-01 13:49:12 +09:00
Leonard Hall 4b20a2d5f1 Copter: Add control over throttle ramp time during take-off 2022-08-31 19:19:04 -04:00
Leonard Hall 0b1f959ede Copter: fix auto mode is_taking_off 2022-08-30 05:56:08 -04:00
Peter Barker 7c6ec00e11 Copter: display throttle below failsafe only when display_failure set 2022-08-30 17:29:09 +10:00
esaldiran cbadf77652 ArduCopter: support custom controller 2022-08-30 13:10:09 +10:00
Iampete1 353aedb547 Copter: Arming: check EKF height varance 2022-08-29 20:16:02 -04:00
Leonard Hall 427c64eff0 Copter: Replace set_throttle_takeoff with init_z_controller 2022-08-29 13:35:32 +09:00
Henry Wurzburg c7ddc9867d Copter: correct DISARM_DELAY metadata 2022-08-25 20:03:04 -04:00
rishabsingh3003 8fcd42d104 Copter: Convert PRX_ parameters to PRX1_ 2022-08-24 18:26:27 +10:00
Henry Wurzburg 54d5883f87 ArduCopter: add ARM/MOTOR_EMERGENCY_STOP Aux Switch 2022-08-24 16:03:52 +10:00
Andrew Tridgell d18cf7fa75 Copter: removed use of "blended" earth frame accel 2022-08-21 18:51:59 +10:00
Randy Mackay 116ab51e50 Copter: 4.2.3-rc3 release notes 2022-08-20 12:28:11 +09:00
Randy Mackay 658298ed1d Copter: auto takeoff may trigger terrain failsafe 2022-08-19 19:51:26 -04:00
murata d519c94b32 Copter: Clarify the mode 2022-08-19 01:05:53 -04:00
Stephen Dade 58cb4cbfb1 Copter: Make mode flowhold a build option via MODE_FLOWHOLD_ENABLED 2022-08-18 07:46:13 -04:00
Peter Barker 78c742978e ArduCopter: rename OpticalFlow class to AP_OpticalFlow
Brings us in-line with other classes in ArduPilot.

Removes ambiguity with AP_HAL::OpticalFlow which can cause compilation errors as we start to make code more portable across targets
2022-08-18 14:24:01 +10:00
Henry Wurzburg d3aebd72d8 Copter: logging disentangle and correct bugs and rename bitmasks
fix
2022-08-16 20:16:24 -04:00
Randy Mackay 33d214589f Copter: replace send-mount-status with send-gimbal-device-attitude-status 2022-08-15 20:29:25 -04:00
Peter Barker d39fcfd038 ArduCopter: move call to compass cal update up to AP_Vehicle 2022-08-16 10:06:44 +10:00
Randy Mackay e4484d7f92 Copter: 4.2.3-rc2 release notes 2022-08-15 11:07:57 +09:00
Randy Mackay c7dc1fc441 Copter: 4.2.3-rc1 release notes 2022-08-12 15:56:22 +09:00
Peter Barker cb9f376638 Copter: make rc-in-failsafe checks a prearm check rather than an at-arm check 2022-08-11 20:01:45 -04:00
Peter Barker 1e3f37908c Copter: factor out an rc_throttle_failsafe_checks method
NFC, preparing to call this from elsewhere
2022-08-11 20:01:45 -04:00
Andy Piper 9a450a05bb Copter: add fast harmonic notch logging 2022-08-09 03:45:08 -04:00
Andy Piper 1c8d206dfb Copter: fast attitude logging should be at loop rate 2022-08-09 03:45:08 -04:00
Peter Barker 67d8965cad ArduCopter: make terrain checks common between Copter and Plane 2022-08-09 14:31:14 +10:00
Tamas Nepusz 5e7622d593 Copter: reserve mode number 127 and param group 62 for Skybrush 2022-08-09 13:22:07 +10:00
Peter Barker a54321ad12 Copter: remove pointless clause in motor_checks
check_failed doesn't make any state changes and we return true in either case
2022-08-08 20:42:26 -04:00
Peter Barker a5dadd2694 Copter: move motors check to be must-run prearm
motors check would be run twice on arm without this.

After this change, even if ARMING_CHECKS is 0 the user will be warned they need to set FRAME_CLASS and FRAME_TYPE, rather than just when they try to arm the vehicle.
2022-08-08 20:42:26 -04:00
Iampete1 ac94ba33ff ArduCopter: params always use set method 2022-08-03 13:43:48 +01:00