Shiv Tyagi
e1bcd39040
Tools: use new AP_PERIPH_PROXIMITY_ENABLED define
2025-02-27 08:00:43 +11:00
Shiv Tyagi
ce66335f10
Tools: use new AP_PERIPH_SERIAL_OPTIONS_ENABLED define
2025-02-26 11:31:04 +11:00
Peter Barker
6338d10b5f
global: create and use HAL_PROGRAM_SIZE_LIMIT_KB
...
We will reserve BOARD_FLASH_SIZE for the internal flash on stm32 flash processors, use HAL_PROGRAM_SIZE_LIMIT_KB in the general code base.
Notable change here is that boards with external flash will start to get features only available with more than 2MB of program storage
2025-02-26 10:06:39 +11:00
Shiv Tyagi
dabd9ba73e
Tools: use new AP_PERIPH_MSP_ENABLED define
2025-02-23 10:28:54 +11:00
Shiv Tyagi
873abe3fd3
Tools: use new AP_PERIPH_RELAY_ENABLED define
2025-02-23 08:58:36 +11:00
Shiv Tyagi
6a429b887a
Tools: use new AP_PERIPH_RC_OUT_ENABLED define
2025-02-22 18:26:07 +11:00
Shiv Tyagi
76aed8f89c
Tools: use new AP_PERIPH_HOBBYWING_ESC define
2025-02-20 21:56:14 +11:00
Shiv Tyagi
2b6bbedce6
Tools: use new AP_PERIPH_NOTIFY_ENABLED define
2025-02-20 13:32:20 +11:00
Shiv Tyagi
82a0347657
Tools: use new AP_PERIPH_EFI_ENABLED define
2025-02-20 13:05:19 +11:00
Shiv Tyagi
9b226edf3a
Tools: use new AP_PERIPH_ADSB_ENABLED define
2025-02-20 12:06:00 +11:00
Iampete1
9fccccbb3d
Tools: AP_Periph: SIM: servo telem move to one indexed
2025-02-18 11:51:34 +11:00
Iampete1
9427b81366
Tools: move from MAV_MODE enum to uint8_t
2025-02-17 17:20:24 +11:00
Shiv Tyagi
222f3ceefd
Tools: use AP_PERIPH_NETWORKING_ENABLED for HAL_PERIPH_ENABLE_NETWORKING
2025-02-17 09:55:51 +11:00
Shiv Tyagi
0248f0d5d8
Tools: replace HAL_PERIPH_ENABLE_AIRSPEED with AP_PERIPH_AIRSPEED_ENABLED
2025-02-16 10:11:10 +11:00
Shiv Tyagi
abc605c7e4
Tools: u AP_PERIPH_RPM_ENABLED and AP_PERIPH_RPM_STREAM_ENABLED
2025-02-13 20:29:06 +11:00
Shiv Tyagi
651e0be73c
Tools: replace HAL_PERIPH_ENABLE_RCIN with AP_PERIPH_RCIN_ENABLED
2025-02-11 19:31:19 +11:00
Shiv Tyagi
0b96145fbb
Tools: use AP_PERIPH_RTC_ENABLED in place of HAL_PERIPH_ENABLE_RTC
2025-02-10 09:37:48 +11:00
Shiv Tyagi
61fb095525
Tools: use AP_PERIPH_IMU_ENABLED in place of HAL_PERIPH_ENABLE_IMU
2025-02-08 08:22:10 +11:00
Shiv Tyagi
c324143866
Tools: create and use AP_PERIPH_RANGEFINDER_ENABLED
2025-02-03 10:06:04 +11:00
Andrew Tridgell
30e3533cef
AP_Periph: support CAN switch and LED defines
...
this allows for hwdef entries like this:
PB1 GPIO_CAN1_TERM OUTPUT PUSHPULL SPEED_LOW LOW
PB3 GPIO_CAN1_TERM_LED OUTPUT PUSHPULL SPEED_LOW LOW
PB0 GPIO_CAN1_TERM_SWITCH INPUT FLOAT
that specifies a termination pin controllable by either a parameter or
a hardware switch, with an LED to indicate if termination is active
2025-02-01 16:59:29 +11:00
Shiv Tyagi
dba4136f95
Tools: create and use AP_PERIPH_BARO_ENABLED
2025-01-31 08:25:28 +11:00
Shiv Tyagi
1060d6703b
Tools: create and use AP_PERIPH_MAG_ENABLED
2025-01-30 08:49:03 +11:00
Peter Barker
a2322abe02
AP_Periph: adjust for new type-safety for AP_Enum
2025-01-29 19:21:59 +11:00
Peter Barker
4fb4556017
Tools: rename SRV_Channel::Aux_servo_function_t to SRV_Channel::Function
2025-01-28 21:56:46 +11:00
Peter Barker
6a9d3f97dd
Tools: use python3 -m pip to install Python packages
2025-01-28 21:56:05 +11:00
Iampete1
f8967eb842
SITL: AP_Periph: sim_update_actuator report IDs that match AP channel indexes
2025-01-28 12:10:17 +11:00
Peter Barker
b3bc0528e0
Tools: create and use AP_PERIPH_BATTERY_ENABLED
...
... and AP_PERIPH_BATTERY_BALANCE_ENABLED while we're here
2025-01-28 09:11:21 +11:00
murata
3b8d1d23dd
AP_Periph: support 32 motors in a frame
2025-01-27 14:03:41 +11:00
Peter Barker
04786200c3
Tools: create AP_PERIPH_GPS_ENABLED
2025-01-23 17:47:58 +11:00
Andy Piper
bc94df6d54
AP_Periph: correct use usage
2025-01-21 11:10:31 +11:00
Hayden Donald
a953cc2019
AP_Periph: Add restart acknowledgement for UAVCAN
...
There was no acknowledgement for UAVCAN so we add it here
2025-01-15 14:05:48 +11:00
muramura
bdacfdc76d
AP_Periph: Change division to multiplication
2025-01-02 23:22:42 +11:00
Iampete1
95d4dc1a0d
Tools: AP_Periph: Web: scripts: fix luacheck issue
2024-12-24 14:48:58 -06:00
Andrew Tridgell
4c0ef40d3b
AP_Periph: fixed IMU in periph
...
wait_for_sample() can't handle very low sample rates without a
separate delay() by a ms value
2024-12-10 09:29:37 +11:00
Andrew Tridgell
13807f24d7
AP_Periph: added simulation of DroneCAN servo status
...
allows for testing of DroneCAN servo logging in SITL
2024-12-03 07:38:17 +11:00
Andrew Tridgell
08761e6066
AP_Periph: fixed build with scripting
2024-11-20 07:32:03 +11:00
Hayden Donald
79b596d229
AP_Periph: Prepare reboot before rebooting via AP_Periph:reboot()
...
Call AP_Periph:prepare_reboot() before rebooting via AP_Periph:reboot()
2024-11-19 16:08:40 +11:00
bugobliterator
37cfe71257
AP_Periph: add missing mandatory virtual method define for GCS_MAVLink
2024-11-15 11:25:19 +11:00
Peter Barker
dce4396430
Tools: make SRV_Channels::cork non-static
...
for symmetry with the push function
2024-11-13 19:47:49 +11:00
Peter Barker
573b02fc23
AP_Periph: create and use a singleton for SRV_Channels
2024-11-13 19:47:49 +11:00
Peter Barker
0ce765aac1
Rover: add specific defines for sending of GPS mavlink messages
2024-11-13 19:40:19 +11:00
Peter Barker
d1674b089a
AP_Periph: rearrange apd periph initialiser for --error=reorder
2024-11-13 06:40:37 +11:00
James O'Shannessy
753f9eedef
AP_Periph: Fix documentation for INS parameters
...
Parameters are being generated as `INS_` as the group, so `INS_USE` is actually documented as `INS__USE` (not the double underscore).
2024-11-05 10:05:01 +09:00
bugobliterator
b05a6c00b6
AP_Periph: add support for publishing raw imu data
2024-10-23 06:46:22 +09:00
bugobliterator
27b202e984
AP_Periph: make can broadcast threadsafe, like can_printf call from lua thread
2024-09-16 19:45:24 +10:00
Thomas Watson
dcd34dd39e
AP_Periph: clean up node ID parameter handling
...
Properly document the range and behavior.
Rename storage variable as it doesn't connect to the DNA preferred ID
feature.
2024-09-10 12:36:34 +10:00
Thomas Watson
ebcb753acc
AP_Periph: reject allocation of broadcast node ID
...
It is technically legal to receive an "allocation" of the broadcast node
ID. Fortunately, this was already ignored by `canardSetLocalNodeID`,
though it would trigger an assertion failure if those were enabled.
Fix by rejecting that ID. There is effectively no change in behavior
(except possibly fixes using moving baseline GPSes) but the code now
correctly ignores that ID and retries the allocation as it did before.
2024-09-10 12:31:19 +10:00
Ryan Friedman
c5484d9d62
Tools: AP_Periph: Add AP_GSOF to libraries
...
Signed-off-by: Ryan Friedman <ryanfriedman5410+github@gmail.com>
2024-08-20 14:50:05 +10:00
Iampete1
0b551ed7bc
AP_Periph: add support for sending extended ESC status
2024-08-20 09:14:11 +10:00
Thomas Watson
f2f1ac39cf
AP_Periph: remove redundant DroneCAN packet buffer initialization
...
The <msg>_encode method always zeros the buffer up to <msg>_MAX_SIZE
bytes so there is no need to do it before calling the function.
Saves at least 8 bytes per instance.
2024-08-03 19:02:39 +10:00
