Peter Barker
|
90362a4849
|
AP_RangeFinder: tighten scope of stack variable definition
|
2022-06-22 21:15:18 +10:00 |
Peter Barker
|
6923f20ce6
|
AP_RangeFinder: stop persisting detections in LeddarOne driver
We don't use these readings except immediately after where we store them - so don't store them persistently.
|
2022-06-22 21:15:18 +10:00 |
murata
|
65cfded501
|
Rover: Initialize a string array
|
2022-06-22 17:25:56 +10:00 |
murata
|
501bd61820
|
Plane: Initialize a string array
|
2022-06-22 17:25:56 +10:00 |
murata
|
1aae0610a6
|
Copter: Initialize a string array
|
2022-06-22 17:25:56 +10:00 |
Andy Piper
|
1287fc4fff
|
AC_AttitudeControl: reset throttle mix to used mix when scaling mix down
|
2022-06-22 16:17:26 +09:00 |
Andy Piper
|
877f98e547
|
Copter: keep manual throttle mix at zero throttle when airmode is on
allow landing detection in airmode
increase landing detection timeout in airmode.
|
2022-06-22 16:17:26 +09:00 |
Dr.-Ing. Amilcar do Carmo Lucas
|
f7d21b63a7
|
AP_FETTecOneWire: Fix the recent change of NUM_SERVO_CHANNELS > 24
|
2022-06-22 11:51:23 +10:00 |
Randy Mackay
|
c334fbe069
|
Rover: 4.2.2-rc1 release notes
|
2022-06-21 20:17:21 +09:00 |
Randy Mackay
|
e9d17484d4
|
Copter: 4.2.2-rc1 release notes
|
2022-06-21 20:17:13 +09:00 |
Randy Mackay
|
66f1603aea
|
Tools: autotest default params for sub use MNT_RC_RATE
|
2022-06-21 13:37:11 +09:00 |
Randy Mackay
|
65d8cff1f2
|
Tools: LogAnalyzer checks MNT_RC_RATE
|
2022-06-21 13:37:11 +09:00 |
Randy Mackay
|
1a5216aaee
|
Tools: autotest for mount sets MNT_RC_RATE
|
2022-06-21 13:37:11 +09:00 |
Randy Mackay
|
5add147c8d
|
Sub: set param default for MNT_RC_RATE to 30deg/s
|
2022-06-21 13:37:11 +09:00 |
Randy Mackay
|
45cd158b1c
|
AP_Mount: gremsy searches for gimbal while disarmed
|
2022-06-21 13:37:11 +09:00 |
Randy Mackay
|
a47ac7430b
|
AP_Arming: add mount pre-arm check
|
2022-06-21 13:37:11 +09:00 |
Randy Mackay
|
8ba8c67452
|
AP_Mount: gremsy implements healthy
|
2022-06-21 13:37:11 +09:00 |
Randy Mackay
|
822ee75e20
|
AP_Mount: add healthy and pre_arm_checks
Co-authored-by: olliw42 <waldmanns@gmx.de>
|
2022-06-21 13:37:11 +09:00 |
Randy Mackay
|
10da8a42bd
|
AP_Mount: replace JSTICK_SPD with RC_RATE
|
2022-06-21 13:37:11 +09:00 |
Randy Mackay
|
ca0ea39d4f
|
Copter: land and payload place obey alt frame
|
2022-06-21 09:07:36 +09:00 |
Randy Mackay
|
46023318d4
|
Copter: get_rangefinder_height_interpolated_cm made const
|
2022-06-21 09:07:36 +09:00 |
Isaac A
|
94064175af
|
AP_HAL_ChibiOS: Allow KakuteF7 initialization without baro
|
2022-06-21 10:03:08 +10:00 |
Iampete1
|
dc0491a8ff
|
AP_AHRS_view: add rotate method to move from AHRS to AHRS view referance frames
|
2022-06-21 10:01:30 +10:00 |
Iampete1
|
f2a162b963
|
Plane: rotate Qassist desired rates correctly
|
2022-06-21 10:01:30 +10:00 |
TunaLobster
|
0027660f3f
|
AP_RCMapper: Increase parameter metadata range to match NUM_RC_CHANNELS
|
2022-06-21 09:57:44 +10:00 |
Peter Barker
|
deba0b712b
|
AP_RangeFinder: correct creation/use of TFMINI_ADDR_DEFAULT
Named incorrectly and defined in wrong file...
|
2022-06-21 09:15:20 +10:00 |
Peter Barker
|
05131853d8
|
AP_UAVCAN: allow rangefinder backends to be individually compiled in
|
2022-06-21 09:15:20 +10:00 |
Peter Barker
|
71a4d24e72
|
Tools: add rangefinder backends to custom build server options
|
2022-06-21 09:15:20 +10:00 |
Peter Barker
|
3a347d32ca
|
AP_RangeFinder: allow rangefinder backends to be individually compiled in
|
2022-06-21 09:15:20 +10:00 |
Peter Barker
|
ce1bb906b7
|
AP_HAL_ChibiOS: allow rangefinder backends to be individually compiled in
|
2022-06-21 09:15:20 +10:00 |
Iampete1
|
d251c51ca1
|
Plane: Quadplane: QRTL climb to QRTL alt first if in Q mode
|
2022-06-21 09:11:08 +10:00 |
Peter Barker
|
4e438464d7
|
AP_Baro: tidy probing of external i2c baros
|
2022-06-21 09:09:55 +10:00 |
Bill Geyer
|
4bb3b08a4a
|
AC_AutoTune: fix tradheli bug with load gain set
|
2022-06-20 13:00:53 +09:00 |
Andrew Tridgell
|
3a6b153d55
|
Tools: added filter tool to web-firmware
makes it easier others to PR changes to improve the tool
|
2022-06-18 09:34:50 +10:00 |
TunaLobster
|
afaca4b5f6
|
AP_RCMapper: Remove APM 2.x reference in parameter description
|
2022-06-18 08:26:40 +09:00 |
Andrew Tridgell
|
e9942f9a17
|
Plane: prepare for 4.2.2beta1
|
2022-06-17 14:09:09 +10:00 |
Andrew Tridgell
|
2e1af59057
|
AP_Rangefinder: fixed scaling on PWM driver and enable SCALING parameter
this fixes a bug introduced here:
https://github.com/ArduPilot/ardupilot/pull/18829
and allows the scaling of PWM rangefinders to be adjusted
|
2022-06-17 08:21:44 +10:00 |
Andrew Tridgell
|
7e4fb803a2
|
AC_AttitudeControl: reduced default quadplane VTOL pos XY gains
|
2022-06-16 21:26:49 +10:00 |
Andrew Tridgell
|
42f553626e
|
Plane: adjust down default quadplane gains
make it better for a typical quadplane, the defaults were more
suitable on smaller aircraft
|
2022-06-16 21:26:49 +10:00 |
Peter Barker
|
08ae4f050c
|
autotest: fix race condition in button test
The subsequent test could end up arming the vehicle based on this left-over state.
|
2022-06-16 21:24:31 +10:00 |
Peter Barker
|
4a015bd479
|
autotest: fix race condition in mission-end-behaviour test
|
2022-06-16 21:24:31 +10:00 |
Peter Barker
|
57b0d7f235
|
autotest: change rover default speedup time to 100
|
2022-06-16 21:24:31 +10:00 |
Peter Barker
|
b150c48b5c
|
Tools: add --no-run-with-defaults option to test-build-options script
|
2022-06-16 17:20:06 +10:00 |
Peter Barker
|
7120d4f750
|
autotest: fix race condition in need-ekf-to-arm check
At extreme speedups we may not detect the reboot in the Python before the autopilot is ready to arm...
|
2022-06-16 14:53:21 +10:00 |
Shiv Tyagi
|
c339b1d374
|
SIM_Precland: add option to set orientation of precland device in sitl
|
2022-06-16 12:43:55 +10:00 |
Joshua Henderson
|
13d1b8632b
|
Copter: remove param docs for ACRO_RP_P and _YAW_RP
|
2022-06-16 09:09:55 +09:00 |
Peter Barker
|
39a0ecbb4b
|
autotest: check rate is configured after we do the rate check
This is just to make sure that the autopilot isn't losing the configuration somehow.
|
2022-06-16 10:04:08 +10:00 |
Peter Barker
|
6fcdea67c3
|
autotest: tidy hover_and_check_matched_frequency method
- remove pointless elses
- clarify why a test is failing in exception messages
- move variable definitions closer to their use
|
2022-06-15 19:07:34 +10:00 |
Andrew Tridgell
|
5a36d7cf0a
|
AP_Periph: fixed non-contiguous mask for ESC telem output
this fixes the case where a peripheral node has an ESCs that are not
starting at the first channel. Reported here:
https://discuss.ardupilot.org/t/using-matekl431-adapters-for-pwm-and-dshot/85781/22
tested on MatekL431-Periph
|
2022-06-15 18:16:22 +10:00 |
Randy Mackay
|
e55fa6ad92
|
Tools: add build_options for individual mount drivers
|
2022-06-15 18:08:58 +10:00 |