Leonard Hall
30aa636ba1
AC_WPNav: seperate kinimatic shaping from pid limit setting
2021-07-22 16:01:01 +10:00
Leonard Hall
c1484f4b31
AC_AttitudeControl: AC_PosControl: seperate kinimatic shaping from pid limit setting
2021-07-22 16:01:00 +10:00
Leonard Hall
9d8fdf3e85
AC_AttitudeControl: Add terain following to guided
2021-07-22 16:01:00 +10:00
Randy Mackay
3e2949ce98
AC_WPNav: get_terrain_offset and get_vector_NEU made public
2021-07-22 16:01:00 +10:00
Leonard Hall
0269c49c14
AC_WPNav: move code to generate terrain following kinematic path
2021-07-22 16:01:00 +10:00
Leonard Hall
d5d7e3d5d3
AC_AttitudeControl: AC_PosControl: Support Accel only input
2021-07-22 16:01:00 +10:00
Leonard Hall
a546a9ac14
AC_AttitudeControl: AC_PosControl: Change input_pos_xyz name
2021-07-22 16:01:00 +10:00
Andrew Tridgell
3fd0bf734b
AP_Math: added test for SCurve::calculate_path
...
this was the values shown in the core dump for failing guided mode
test in CI
2021-07-22 16:01:00 +10:00
Andy Piper
560a5ea225
AP_HAL_ChibiOS: re-enable LEDs on MatekF405-bdshot
2021-07-22 16:01:00 +10:00
Randy Mackay
5697e5616c
AP_NavEKF3: EK3_RNG_USE_HGT param references EK3_SRCx_POSZ
2021-07-22 16:01:00 +10:00
Andrew Tridgell
8165a81256
AP_Common: update tests for 4.1
2021-07-22 16:01:00 +10:00
Andrew Tridgell
d128c1a86f
HAL_ChibiOS: raise DMA contention threshold for H7
2021-07-22 16:01:00 +10:00
Andrew Tridgell
52e4b522f9
AP_SerialManager: document DisableFIFO bit
2021-07-22 16:01:00 +10:00
Andrew Tridgell
18d90f76b5
AP_SerialManager: call set_options() before first UART use
...
this ensures options are set before the first begin() call
2021-07-22 16:01:00 +10:00
Andrew Tridgell
c2b310ad86
HAL_ChibiOS: implement NOFIFO option for uarts
2021-07-22 16:01:00 +10:00
Andrew Tridgell
c37310b966
AP_HAL: added serial option for disabling FIFO on uarts
2021-07-22 16:01:00 +10:00
Andrew Tridgell
0579870593
AP_Math: fixed build
2021-07-22 16:01:00 +10:00
Andrew Tridgell
97da800b67
HAL_SITL: update for changed SITL API
2021-07-22 16:01:00 +10:00
Andrew Tridgell
8fc7f661e8
SITL: added SIM2 message
...
useful for EKF debugging
# Conflicts:
# libraries/SITL/SIM_Aircraft.cpp
2021-07-22 16:01:00 +10:00
Andrew Tridgell
29f694ffdd
SITL: separate origin and home in SITL
...
this allows for accurate sensor data when flying a very long distance
from the takeoff location
2021-07-22 16:01:00 +10:00
Andrew Tridgell
f8e315fc65
AP_DAL: update GPS yaw API to add timestamp
2021-07-22 16:01:00 +10:00
Andrew Tridgell
4b2c766857
AP_GPS: change handling of moving baseline yaw
...
this changes yaw handling in a few ways:
- GPS yaw now has a timestamp associated with the yaw separate from
the timestamp associated with the GPS fix
- we no longer force the primary to change to the UBLOX MB rover when
it has a GPS yaw. This means we don't change GPS primary due to GPS
loss, which keeps the GPS more stable. It also increases accuracy
as the rover is always less accurate in position and velocity than
the base
- now we force the primary to be the MB base if the other GPS is a
rover and the base has GPS lock
2021-07-22 16:01:00 +10:00
Andrew Tridgell
de254d59f1
AP_NavEKF: sync for 4.1.0beta
2021-07-22 16:01:00 +10:00
Andrew Tridgell
dd2995af5d
AP_Math: sync for 4.1.0beta releases
2021-07-22 16:01:00 +10:00
Andrew Tridgell
1d46e77942
AP_Common: make longitude_scale() a static
...
this changes the use of longitude_scale() to use the average latitude
instead of the lattitude at one end of the line when calculating
positions and distances. It means we obey the basic geometry rule
that:
pos1 + offs = pos2
pos2 - offs == pos1
2021-07-22 16:01:00 +10:00
Andrew Tridgell
f0bc4bca84
HAL_ChibiOS: run storage writes at 1kHz not 100Hz
...
The 100Hz update rate means there is a significant chance of an arming
failure after mission upload if you try to arm shortly after the
update.
Each mission item is 15 bytes, so with a 1200 item mission we need to
write 18000 bytes to storage. At 100Hz, with 8 bytes per storage line,
that takes over 22 seconds.
2021-07-22 16:01:00 +10:00
Peter Barker
156a220d5b
AP_NavEKF3: pass NavEKF failures back up to callers
2021-07-22 16:01:00 +10:00
Andrew Tridgell
9f03f5a9a9
AP_NavEKF3: process GPS yaw independently of GPS fix
...
this processes GPS yaw with its own timestamp and as a separated step
from fusing position and velocity. This makes the yaw time handling
more accurate as yaw for moving baseline GPS comes in as a separate
piece of data from the position and velocity
2021-07-22 16:01:00 +10:00
Andrew Tridgell
4408eecb18
AP_NavEKF3: fixed indentation in readGpsData()
2021-07-22 16:01:00 +10:00
Andrew Tridgell
cc03255245
AP_NavEKF3: implement moving origin
...
this shifts EKF_origin to the current location at 1Hz, while leaving
public_origin alone. All output APIs and logging are relative to
public_origin.
The effect of this change is to remove the distortion caused by a
spherical earth, which allows the EKF to operate without errors at
very long distances from the public_origin.
2021-07-22 16:01:00 +10:00
Andrew Tridgell
8c9663e47c
AP_NavEKF3: moved checkUpdateEarthField to be called less often
2021-07-22 16:01:00 +10:00
Andrew Tridgell
c05e93e51e
AP_NavEKF3: update earth field at 1Hz
...
this prevents large mag errors on long distance flights
2021-07-22 16:01:00 +10:00
Andrew Tridgell
f2668f8e8e
AP_Common: added ftype precision offset call
...
# Conflicts:
# libraries/AP_Common/Location.cpp
# libraries/AP_Common/Location.h
2021-07-22 16:01:00 +10:00
Andrew Tridgell
edb11d4d71
AP_NavEKF3: convert code_gen.py to ftype
2021-07-22 16:01:00 +10:00
Andrew Tridgell
823ed4c309
AP_NavEKF3: convert powF(xx,2) calls to sq(xx)
2021-07-22 16:01:00 +10:00
Andrew Tridgell
b6fb7383e7
AP_NavEKF3: convert EKF3 derivation to ftype
2021-07-22 16:01:00 +10:00
Andrew Tridgell
fa3f3dd218
HAL_ChibiOS: define HAL_HAVE_HARDWARE_DOUBLE on F765, F777 and H7
2021-07-22 16:01:00 +10:00
Andrew Tridgell
a6c5b65f4a
AP_NavEKF3: allow for double EKF build
2021-07-22 16:01:00 +10:00
Andrew Tridgell
380b9b39ed
AP_NavEKF2: allow for double EKF build
2021-07-22 16:01:00 +10:00
Andrew Tridgell
10facfc519
AP_NavEKF: allow for double EKF build
2021-07-22 16:01:00 +10:00
Andrew Tridgell
4dfa6258d9
AP_Mount: use ZERO_FARRAY()
2021-07-22 16:01:00 +10:00
Andrew Tridgell
26820c3a8c
AP_Motors: fixup build for ftype conflict
2021-07-22 16:01:00 +10:00
Andrew Tridgell
425c8aafb1
AP_Common: added double methods for SITL
2021-07-22 16:01:00 +10:00
Andrew Tridgell
d698987070
SITL: fixup offset calls
2021-07-22 16:01:00 +10:00
Andrew Tridgell
e7afa628d1
AP_Math: allow for double EKF build
2021-07-22 16:01:00 +10:00
Andrew Tridgell
c6c197d4fb
HAL_ChibiOS: use SRAM1 as first ram segment on H7
...
this is needed to give the linker more than 128k for static variables
with double precision maths.
2021-07-22 16:01:00 +10:00
Andrew Tridgell
309500c84f
AP_HAL: allow for double EKF build
2021-07-22 16:01:00 +10:00
Andrew Tridgell
ae013dd5e6
APM_Control: adjust fixed wing filter defaults
...
adjust defaults based on discussions with Paul, and initialise the
FLTT value based on the controller time constant
2021-07-05 16:09:34 +10:00
Andrew Tridgell
2ac01f207a
AP_Notify: disable DShot buzzer by default
2021-07-04 18:28:20 +10:00
Andy Piper
b5bb401b97
AP_Notify: re-enable display on 1Mb boards
2021-07-04 08:24:40 +10:00