Commit Graph

25470 Commits

Author SHA1 Message Date
murata
3a006ae226 AP_GPS: Supplementary explanation of configuration parameters (NFC) 2021-03-16 10:43:18 +11:00
murata
c5b1c832ba AP_NavEKF3: Change misnomer (NFC) 2021-03-15 18:21:15 +11:00
murata
24591d68bc AP_NavEKF2: Change misnomer (NFC) 2021-03-15 18:21:15 +11:00
Hwurzburg
e1bab7374b AP_Notify: Add calibration indications for EKF temp and compass cal to RGB LED 2021-03-15 09:49:59 +09:00
Peter Barker
4605870788 AP_NavEKF3: remove separate calls to get delta-times for vel and ang 2021-03-13 11:29:29 +11:00
Peter Barker
5dff32422d AP_NavEKF2: remove separate calls to get delta-times for vel and ang 2021-03-13 11:29:29 +11:00
Peter Barker
5c31238f28 AP_Mount: remove separate calls to get delta-times for vel and ang 2021-03-13 11:29:29 +11:00
Peter Barker
2b0bf45891 AP_InertialSensor: remove separate calls to get delta-times for vel and ang 2021-03-13 11:29:29 +11:00
Peter Barker
a0fcd74b52 AP_DAL: remove separate calls to get delta-times for vel and ang 2021-03-13 11:29:29 +11:00
Peter Barker
ea1884f491 AP_AHRS: remove separate calls to get delta-times for vel and ang 2021-03-13 11:29:29 +11:00
Peter Barker
5123b05b2b GCS_MAVLink: add support for ATTITUDE_QUATERNION 2021-03-13 09:44:12 +11:00
Siddharth Purohit
edceb4e3a4 AP_GPS: move underscore one layer down for GPS 2021-03-12 16:32:36 +09:00
bugobliterator
49d934eb42 AP_HAL_SITL: add support for multiple periph instances 2021-03-12 16:32:36 +09:00
bugobliterator
0031fee851 AP_GPS: add support for ordering UAVCAN GPS 2021-03-12 16:32:36 +09:00
bugobliterator
67be2ed4ba AP_Arming: add support for GPS_Backends to spew failure reasons 2021-03-12 16:32:36 +09:00
Michael du Breuil
a3ddf5264d AP_GPS: Support uavcan ardupilot.gnss.Status
Also makes the drive by change to make GPS_Backend::is_configured const
2021-03-12 09:39:55 +11:00
Michael du Breuil
e47857a278 AP_UAVCAN: Add ardupilot.gnss.Status 2021-03-12 09:39:55 +11:00
Hwurzburg
fd9c497232 AP_OSD: Add height above terrain panel and warning 2021-03-11 11:54:47 +11:00
murata
8e8f2b93a7 AP_Motors: Add DECA frame class and type string 2021-03-09 19:59:10 +09:00
Rishabh
e9c0e50185 AP_Proximity: Filter out land detected by sensors 2021-03-09 11:02:26 +09:00
Randy Mackay
fe382e4d10 AP_Mission: minor format fixes 2021-03-09 11:49:42 +11:00
Randy Mackay
3a66b2667b AP_Mission: correct spelling of interrupted 2021-03-09 11:49:42 +11:00
Rishabh
e09e9b1e6a AP_Logger: Log raw and filtered distances from proximity lib 2021-03-08 16:33:20 +09:00
Rishabh
044e1850d4 AP_Proximity: Add a low pass filter per face for distances 2021-03-08 16:33:20 +09:00
James O'Shannessy
f028747399 GCS_MAVLink: Remove todo since plane now supports MAV Protocol Capability Mission Fence 2021-03-05 16:48:57 +11:00
James O'Shannessy
43e06e9040 AC_Fence: Fix int32_t overflow with large longitude values 2021-03-05 14:52:46 +11:00
James O'Shannessy
26811ad46d AP_Landing: Autoenable fence if required when landing was aborted 2021-03-05 14:52:46 +11:00
James O'Shannessy
8ef68c8fb0 AC_Fence: Send text to gcs when fence is auto-enabled 2021-03-05 14:52:46 +11:00
James O'Shannessy
b4bf41c6f9 AC_Fence: Adjustments to default parameters for addition to plane 2021-03-05 14:52:46 +11:00
James O'Shannessy
c316711351 ArduPlane: Add conversion from ArduPlane geofence param to AC_Fence param 2021-03-05 14:52:46 +11:00
James O'Shannessy
254c28f142 AC_Fence: Improve auto enable documentation 2021-03-05 14:52:46 +11:00
James O'Shannessy
b6d29d746b AC_Fence: Add common auto enable and auto disable 2021-03-05 14:52:46 +11:00
James O'Shannessy
e4f1e26b5c AC_Fence: Disable fence floor when disabling the rest of the fence 2021-03-05 14:52:46 +11:00
Steven Josefs
c783410494 AC_Fence: adjusted AP_GROUPINFO to contain all copters 2021-03-05 14:52:46 +11:00
Dr.-Ing. Amilcar Do Carmo Lucas
22bdc3e54c AC_Fence: extend pre-arm checks
Fix comments
2021-03-05 14:52:46 +11:00
Dr.-Ing. Amilcar do Carmo Lucas
2e422f249a AC_Fence: small comment improvements. Do not call the same function four times 2021-03-05 14:52:46 +11:00
Dr.-Ing. Amilcar do Carmo Lucas
15e95be7d7 AC_Fence: do not delete the FENCE_ENABLE parameter. It would confuse many users.
Talked to Randy about this. The consensus was not to delete the parameter
2021-03-05 14:52:46 +11:00
James O'Shannessy
783a4b7965 AC_Fence: Change logic to fence enable and sys_status reporting 2021-03-05 14:52:46 +11:00
James O'Shannessy
a23e8d46da AP_Vehicle: Add additional fence mode change reason 2021-03-05 14:52:46 +11:00
James O'Shannessy
8ca69c2e89 AP_Logger: Add support for fence floor events 2021-03-05 14:52:46 +11:00
James O'Shannessy
c2abf27d78 GCS_MAVLink: Add reporting of fence floor breaches to GCS_MAVLink
GCS_MAVLink: Add disabling of fence floor only, per mavlink spec

GCS_MAVLink: Cannot enable a fence if the fence is not present
2021-03-05 14:52:46 +11:00
James O'Shannessy
0e73b7bce1 AP_Arming: Enable and Disable the fence when vehicle is armed/disarmed
AP_Arming: Use auto enable flag to arm fence only when armed (as per enum)

AP_Arming: Config defines are not available in AP_Arming

Since config definitions are not available in AP_Arming, we can still rely on singleton access of the AC_Fence object.

AP_Arming: Perform fence checks for all vehicles
2021-03-05 14:52:46 +11:00
James O'Shannessy
87b66b4b49 AC_Fence: Add parameters from Geofence to AC_Fence
AC_Fence: Add fence floor breach checks and calculations

AC_Fence: Add event logging to enable/disable of fence floor

AC_Fence: Adjust sys_status reporting to look at total fence count

AC_Fence: Make retrieving of the return point accessible

AC_Fence: Check whether fence is enabled or autoenable is set for arming checks

Checks whether the fence is currently enabled OR if the fence is intended to be enabled automatically.
These checks are used to find out enabled fences, or prearm checks
2021-03-05 14:52:46 +11:00
Paul Riseborough
9b53d505ea AP_AHRS: Handle airspeed estimation with have_inertial_nav() == false 2021-03-05 12:10:01 +11:00
Paul Riseborough
e3eea0a54a AP_NavEKF3: Use specialised function for in-flight plane yaw alignment 2021-03-05 12:10:01 +11:00
Paul Riseborough
4675aea0bf AP_NavEKF3: Update parameter description 2021-03-05 12:10:01 +11:00
Paul Riseborough
246b80dc06 AP_NavEKF3: Don't return a 0,0 lat,lng unless absolutely necessary 2021-03-05 12:10:01 +11:00
Paul Riseborough
aa49e92edc AP_AHRS: Remove unused AP_AHRS_NavEKF::yaw_alignment_complete API 2021-03-05 12:10:01 +11:00
Paul Riseborough
1a3258a039 AP_AHRS: Fall back to DCM airspeed estimate if EKF velocity not available 2021-03-05 12:10:01 +11:00
Paul Riseborough
a50be71b41 AP_NavEKF3: Fix inconsistency in reporting raw GPS position validity 2021-03-05 12:10:01 +11:00