Michael du Breuil
e8373e1fdf
AP_HAL_ChibiOS: add scripting heap
2018-12-31 19:25:23 -07:00
Andrew Tridgell
ed3194d095
HAL_ChibiOS: fixed timer reset
2018-12-31 08:00:14 +11:00
Andrew Tridgell
960d4c0a80
HAL_ChibiOS: allow mount of microSD after boot
...
when disarmed, try to mount sd card every 3s
2018-12-31 08:00:14 +11:00
Andrew Tridgell
8188b4a039
HAL_ChibiOS: fixed card inserted test for SDC
2018-12-31 08:00:14 +11:00
Andrew Tridgell
24f6d6d647
HAL_ChibiOS: support microSD slowdown
...
allow use of BRD_SD_SLOWDOWN to slow down clock on microSD
2018-12-31 08:00:14 +11:00
Andrew Tridgell
8c43db1a00
HAL_ChibiOS: implement half-duplex delay and read locking
2018-12-29 15:58:22 +11:00
Andrew Tridgell
4886ccd8ba
HAL_ChibiOS: fixed safety switch and LEDs on PH4-mini
...
fixes #10127
2018-12-29 15:50:00 +11:00
Siddharth Purohit
8d850e979a
HAL_ChibiOS: add CubePurple/PH2Slim board config
2018-12-28 14:33:14 +11:00
Matt
d4bd7e790a
HAL_ChibiOS: Add hwdef for Solo's Cube Black & Green
...
Adds hwdef files for the 3DR Solo. CubeBlack-solo is based on the
CubeBlack hwdef, with the only difference being default parameters
required by the Solo. CubeGreen-solo is is also identical to CubeBlack,
but has default parameters required by those with a Green Cube in their
Solo. Parameter default files are pulled from the Tools\Frame_Parms
directory where the Solo's parameter files are maintained.
2018-12-11 10:45:37 +11:00
Andrew Tridgell
735a4b6f18
HAL_ChibiOS: setup PH4 for right voltage scaling
2018-12-10 07:45:34 +11:00
Randy Mackay
8b963e7b92
AP_HAL_ChibiOS: remove debug print when SPI device not found
2018-12-06 16:50:16 +11:00
Jani Hirvinen
d9b9638b4a
HAL_ChibiOS: fixed F405 PE15 afnum
...
should be 15 and not 1
2018-12-06 12:43:47 +11:00
Andrew Tridgell
50683633b3
HAL_ChibiOS: setup for brushed feature in IOMCU
2018-11-30 13:14:14 +11:00
Andrew Tridgell
0faab853cb
HAL_ChibiOS: make atob static
...
only used in this file
2018-11-30 11:29:51 +11:00
Andrew Tridgell
8f51bef0f0
HAL_ChibiOS: added 3 tries to microSD MMC init
...
this makes init for MMC/SPI interfaces more reliable
2018-11-29 19:39:11 +11:00
Siddharth Purohit
3b2fdc9c70
HAL_ChibiOS: add support for unformatted board id
2018-11-29 16:36:29 +11:00
Siddharth Purohit
8df52aba29
HAL_ChibiOS: move vsnprintf call to redirect Ardupilot's instead of ChibiOS's
2018-11-29 16:36:29 +11:00
Andrew Tridgell
7459709acb
HAL_ChibiOS: allow ROMFS to override a file
...
this allows a hwdef.dat with an include to change an embedded file
specified in the include
2018-11-28 10:35:50 +11:00
Michael du Breuil
8c464572d8
AP_HAL_ChibiOS: Use a less clever version of realloc
...
The clever version loses access to memory, and is excessively hard coded
2018-11-26 22:32:56 +00:00
Michael du Breuil
b32c5e6f8d
AP_HAL_ChibiOS: Remove unneeded private member
2018-11-27 07:36:17 +11:00
Andrew Tridgell
1428594daf
HAL_ChibiOS: fixed uart order for PH4-mini
...
thanks to Arthur from Holybro
2018-11-21 09:29:15 +11:00
Andrew Tridgell
8ac18f343f
HAL_ChibiOS: added note on KakuteF7 ESC telem
2018-11-20 19:47:48 +11:00
Andrew Tridgell
08199eb5ff
HAL_ChibiOS: updated KakuteF7 docs
2018-11-20 19:45:08 +11:00
Andrew Tridgell
62f07f36c7
HAL_ChibiOS: updated KakuteF4 docs
2018-11-20 19:16:37 +11:00
Andrew Tridgell
101b12617d
HAL_ChibiOS: updated PH4-mini docs
2018-11-20 18:46:35 +11:00
Andrew Tridgell
eac6435dec
HAL_ChibiOS: allow CAP ports to be used as PWM on PH4-mini
2018-11-20 18:46:34 +11:00
Andrew Tridgell
a6ab885866
HAL_ChibiOS: fixed typo in F767 pin def file
2018-11-20 18:28:11 +11:00
Andrew Tridgell
013f1d55e8
HAL_ChibiOS: added support for swapping UART pins
2018-11-20 18:25:35 +11:00
Andrew Tridgell
cfc6ec5e57
HAL_ChibiOS: added PH4-mini docs
2018-11-20 17:26:14 +11:00
Andrew Tridgell
7c2dc84d45
HAL_ChibiOS: added Pixhawk4 docs
2018-11-20 16:19:00 +11:00
Andrew Tridgell
9f22dae444
HAL_ChibiOS: added docs for CUAVv5
2018-11-20 16:03:34 +11:00
Andrew Tridgell
d422e6a6ff
HAL_ChibiOS: correct SPKT pin numbers for CubeBlack
2018-11-20 15:23:06 +11:00
Andrew Tridgell
742d8b8933
HAL_ChibiOS: pixracer and cube doc updates
2018-11-20 15:09:51 +11:00
Andrew Tridgell
8a85d9db69
HAL_ChibiOS: added CubeBlack docs
2018-11-20 14:52:48 +11:00
Andrew Tridgell
715ac2d6c5
HAL_ChibiOS: fixed error in pixracer docs
2018-11-20 13:37:07 +11:00
Andrew Tridgell
35db9c4b85
HAL_ChibiOS: added Pixracer docs
2018-11-20 13:32:46 +11:00
Andrew Tridgell
62be29fbcf
HAL_ChibiOS: added board docs for KakuteF4
2018-11-18 21:37:56 +11:00
Andrew Tridgell
39003905b9
HAL_ChibiOS: re-arrange KakuteF4 UARTs
...
this allows for FrSky S.PORT on Telem2, and enables it by default
2018-11-18 21:37:56 +11:00
Andrew Tridgell
da402f4fb7
HAL_ChibiOS: fixed KakuteF7 UART order
2018-11-18 15:56:42 +11:00
Andrew Tridgell
fa487fe1bc
HAL_ChibiOS: added Pixhawk1 docs
2018-11-18 15:56:42 +11:00
Andrew Tridgell
774cea0dd5
HAL_ChibiOS: added KakuteF7 docs
2018-11-18 14:59:04 +11:00
Andrew Tridgell
d84bc9f556
HAL_ChibiOS: fixed STM32F7 RXINV flag
2018-11-16 15:48:21 +11:00
Andrew Tridgell
8dd58b4181
HAL_ChibiOS: support reversible DShot motors
2018-11-16 08:33:35 +11:00
Andrew Tridgell
adf7fefc2e
HAL_ChibiOS: detect stuck I2C bus and clear with SCL
...
This detects the I2C bus becoming stuck with SDA low after a timeout
and clears the bus by toggling SCL. Many thanks to @jhw84 for the
suggestion
2018-11-16 08:30:40 +11:00
Andrew Tridgell
a0ed658fcc
HAL_ChibiOS: added palReadLineMode() function
...
used to change and restore line modes
2018-11-16 08:30:40 +11:00
Andrew Tridgell
85243ad522
HAL_ChibiOS: enable support for half-duplex uart config
2018-11-14 19:05:09 +11:00
Andrew Tridgell
b346d82f96
HAL_ChibiOS: allow frsky invert for p3pro and mindpx-v2
2018-11-14 19:05:09 +11:00
Andrew Tridgell
f0c13d4089
HAL_ChibiOS: allow user control of frsky inversion on Pixracer
2018-11-14 19:05:09 +11:00
Andrew Tridgell
acf03980ca
HAL_ChibiOS: added UART inversion options
...
support GPIO pins or STM32F7
2018-11-14 19:05:09 +11:00
Andrew Tridgell
bd117f1548
HAL_ChibiOS: define pins for inverting uarts
2018-11-14 19:05:09 +11:00