Andrew Tridgell
8b46782070
AP_HAL_SITL: removed terrain home correction
2022-03-12 08:00:49 +09:00
Andrew Tridgell
5eb8b8d72e
HAL_SITL: support mavcan message forwarding
2022-02-12 16:36:05 +11:00
Andrew Tridgell
9fd25907e2
HAL_SITL: fixed mapping of --serial ports in SITL
...
uart paths are still in uartABCD order
2022-01-21 10:07:55 +11:00
Peter Barker
ee341bc4eb
SITL: add compilation option AP_SIM_CRSF_ENABLED
2022-01-15 21:56:33 +11:00
Peter Barker
08b8d3ad34
AP_HAL_SITL: correct compilation when SIM options disabled
...
AP_HAL_SITL: use AP_ASIM_GIMBAL_ENABLED
AP_HAL_SITL: use AP_SIM_ADSB_ENABLED
AP_HAL_SITL: use AP_SIM_RPLIDARA2_ENABLED
AP_HAL_SITL: use AP_SIM_PS_LIGHTWARE_SF45B_ENABLED
AP_HAL_SITL: use AP_SIM_PS_TERRARANGERTOWER_ENABLED
AP_HAL_SITL: use AP_SIM_AIS_ENABLED
AP_HAL_SITL: use AP_SIM_JSON_MASTER_ENABLED
2022-01-15 17:37:24 +11:00
Pierre Kancir
6584fef711
AP_HAL_SITL: catch more signal for correct exit
...
SIGINT is for ctrl-c
SIGHUP and SIGQUIT are use within term. If the term close before SITL, it will trigger one of those and then exit cleanly anyway
2022-01-12 12:31:56 +11:00
Shiv Tyagi
af950e266b
AP_HAL_SITL: add dataflash to spi device table
...
We simulate jedec flash for logging. Hence, we need to add dataflash to device table. Also, we need to remove HAL_LOGGING_SITL_ENABLED since we no longer need it
Co-Authored-By: Divyateja Pasupuleti <divyateja2004@gmail.com>
2021-12-25 09:14:31 +11:00
Andy Piper
fa91e74fde
AP_HAL_SITL: remove redundant harmonics from DSP
2021-12-22 18:13:38 +11:00
Peter Barker
fbe46f400f
AP_HAL_SITL: stop passing home_str to _sitl_setup
...
This is poked into the model now
2021-12-13 09:30:33 +11:00
Peter Barker
2f77fef10e
AP_HAL_SITL: permit float-equal while we do comparison vs INFINITY
2021-12-13 08:38:17 +11:00
Peter Barker
acbe567202
AP_HAL_SITL: consolidate rangefinder range calculations
2021-12-11 20:10:10 +11:00
Peter Barker
6e8c7c6b03
AP_HAL_SITL: remove unused mag-data delay buffer state variables
...
This delay buffer code is now in AP_Compass_SITL
2021-12-07 16:41:11 +11:00
Peter Barker
cce14d8461
AP_HAL_SITL: remove unused _home_str member
2021-12-07 09:36:22 +11:00
Peter Barker
8cc7f51de1
AP_HAL_SITL: tidy set/get of hw RTC
2021-12-06 12:58:43 +11:00
Peter Barker
11cbd68296
AP_HAL_SITL: remove incorrect use of ARRAY_SIZE
...
This was converted to a linked list....
2021-11-24 18:26:17 +11:00
Peter Barker
cdccc67fb8
AP_HAL_SITL: make SITL::ADSB a SITL::SerialDevice
2021-11-23 11:09:29 +11:00
Andrew Tridgell
3b3abdeef0
AP_HAL_SITL: support up to 9 UARTs
2021-11-22 22:48:59 +11:00
Peter Barker
eb6da9512f
AP_HAL_SITL: quieten i2c-device-creation diagnostics
2021-11-12 10:17:28 +11:00
bugobliterator
09096cb355
AP_HAL_SITL: add get_storage_ptr method
2021-11-10 17:21:35 +11:00
Peter Barker
9ebd0cdeed
AP_HAL_SITL: use SITL::SerialDevice in place of pipe for communication
2021-11-06 16:54:07 +11:00
Peter Barker
02dc42275c
AP_HAL_SITL: remove unused/unimplemented methods/vars, tidy namespacing
2021-10-28 09:09:44 +11:00
Andrew Tridgell
8192661042
AP_HAL_SITL: rename uLanding simulation to USD1
2021-10-26 15:31:12 +11:00
Peter Barker
cf9bbb570c
AP_HAL_SITL: correct nullptr check on simulated mavlink rangefinder
...
Obvious copy/paste error
2021-10-22 21:46:01 +11:00
Peter Barker
1ab8a3e3aa
AP_HAL_SITL: make simulated GPS work as a SerialDevice
2021-10-21 12:09:21 +11:00
Peter Barker
99e80549b1
SITL: move sitl_gps.cpp to SIM_GPS.cpp
2021-10-21 12:09:21 +11:00
Stephen Dade
1356beb14d
AP_HAL_SITL: Add instance to ADSB simulation
2021-10-20 20:21:33 +11:00
Peter Barker
21030c4e83
AP_HAL_SITL: remove written-only AP::sitl().update_rate_hz
2021-10-20 19:07:17 +11:00
Peter Barker
8c9ade3f7f
AP_HAL_SITL: move simulated megasquirt to SerialDevice framework
2021-10-17 10:00:08 +11:00
Asa Davis
85fbbe0704
SITL: add simulator for LORD Microstrain serial EAHRS
2021-10-17 08:55:03 +11:00
Peter Barker
f5d5387358
AP_HAL_SITL: remove unused ext_fifo_fd member variable
2021-10-12 20:07:19 +11:00
Peter Barker
67226433e3
AP_HAL_SITL: add simulated RAMTRON device
2021-10-12 20:01:49 +11:00
Peter Barker
58a7f022fd
AP_HAL_SITL: add simulated SPI devices
2021-10-12 20:01:49 +11:00
Peter Barker
d98cda12c6
AP_HAL_SITL: remove HIL_MODE vestiges
2021-10-12 08:57:05 +11:00
Peter Barker
521918d74c
SITL: remove set-but-not-used _framerate member variable
2021-10-08 14:23:18 +11:00
Iampete1
9f04cded3b
AP_HAL_SITL: AnalogSource: return bool for set_pin
2021-10-06 18:42:51 +11:00
Peter Barker
402669f269
AP_HAL_SITL: add and use HAL_SITL &hal_sitl
...
analogous to our normal "extern hal" stuff but removes need for casting
2021-10-05 22:24:38 +11:00
Peter Barker
3292128531
AP_HAL_SITL: allow for selection of Storage backend type at runtime
2021-10-05 10:16:54 +11:00
Andrew Tridgell
9a29f2558c
HAL_SITL: fixed cygwin build
...
cygwin does not handle panic being weak, it gets a link error
2021-10-03 14:00:34 +11:00
Peter Barker
6bd2bc2179
AP_HAL_SITL: remove mtk GPSs
...
These are ancient and of very poor quality.
2021-09-29 17:28:59 +10:00
Josh Henderson
328cf01436
AP_HAL_SITL: make panic() WEAK
2021-09-28 09:11:48 +10:00
Peter Barker
9c24916115
AP_HAL_SITL: move from HAL_NO_GCS to HAL_GCS_ENABLED
2021-09-22 21:37:00 +10:00
Andrew Tridgell
f77e64ac83
HAL_SITL: Fixed default PWMs for blimp
2021-09-18 08:26:23 +10:00
Peter Barker
ae40531cd7
AP_HAL_SITL: make heli-blade simulation work
2021-09-08 14:33:19 +10:00
Peter Barker
129eb4c184
AP_HAL_SITL: do not overwrite FETTecESC telemetry data w/SITL ESC data
2021-09-01 18:25:51 +10:00
Pierre Kancir
aebe2beba5
AP_HAL_SITL: check that _sitl is not nullptr before using it
2021-08-14 10:20:33 +10:00
Pierre Kancir
c91c570814
AP_HAL_SITL: don't use timer_event() that is static from the _scheduler instance
2021-08-14 10:20:33 +10:00
Peter Barker
26f2393014
AP_HAL_SITL: add simulated FETtec ESC
2021-08-13 16:22:37 +10:00
Iampete1
6deacda180
AP_HAL_SITL: load SIM_AIS
2021-08-10 08:11:18 +09:00
bugobliterator
26e2a4a3cb
AP_HAL_SITL: change class name from SITL::SITL to SITL::SIM
2021-08-05 07:25:31 +10:00
Iampete1
5ff0f42372
AP_HAL_SITL: add slave JSON instances
2021-08-03 09:22:19 +10:00