李孟晓
f497e8639d
AP_HAL_ChibiOS: CUAV-Nora: add usart3 support
2022-04-09 17:04:26 +09:00
李孟晓
94b14ae60b
hwdef: CUAV-Nora: Add servo voltage detection pin
2022-01-06 12:39:45 +11:00
Randy Mackay
9c1ca781f6
AP_HAL_ChibiOS: update for renamed BRD_HEAT_ parameters
2021-11-09 08:02:57 +09:00
Andrew Tridgell
68146d541c
HAL_ChibiOS: removed boilerplate lines from bootloaders
2021-10-26 15:56:53 +11:00
Andrew Tridgell
d962e094e7
HAL_ChibiOS: change RCIN PULLUP to PULLDOWN
...
this makes us more consistent between boards
2021-10-12 11:52:36 +11:00
Peter Barker
70aef84997
AP_HAL_ChibiOS: remove definitions of BOARD_PWM_COUNT_DEFAULT
...
No longer used
2021-08-20 10:51:19 +10:00
honglang
847ce3b311
AP_HAL_ChibiOS: CUAV X7/Nora: use icm42688 instead of bmi088
2021-06-03 13:57:27 +10:00
CUAVcaijie
0ff38e1379
HAL_ChibiOS: CUAV ICM20649 on SPI6 bus replaced by ICM20689
...
alternative IMUs for Nora and X7
2021-06-02 10:49:55 +10:00
Andrew Tridgell
f93e2f6717
HAL_ChibiOS: enable 32k FRAM on H7 boards
2021-01-16 06:47:10 +11:00
Andrew Tridgell
571fbf8f71
HAL_ChibiOS: update power VALID pins
2020-06-04 09:51:27 +10:00
CUAVcaijie
220e6999c7
HAL_ChibiOS:Adapt to CUAV Nora V1.2 hardware
2020-05-28 19:13:49 +10:00
Andrew Tridgell
32cdfddf12
HAL_ChibiOS: convert all hwdef from UART_ORDER to SERIAL_ORDER
...
much easier to understand
2020-04-28 10:32:23 +10:00
Andrew Tridgell
e8b2b52bae
HAL_ChibiOS: removed STM32_VDD from hwdef.dat
...
use default
2020-04-28 10:32:23 +10:00
Andrew Tridgell
d35fff5186
HAL_ChibiOS: set CS pins high while in bootloader
...
this appears to be the root cause of the parameter resets on
CubeOrange. We need to ensure the CS pin is not floating or random
noise on the SPI bus for FRAM can cause the FRAM to become corrupt
2020-03-11 09:53:06 +11:00
Andrew Tridgell
bebfef369f
HAL_ChibiOS: fixed power flags for CUAV-Nora
2020-02-12 21:17:49 +11:00
CUAVcaijie
561808ba3c
HAL_ChibiOS: Added support for CUAV Nora flight controller
2020-02-12 21:17:49 +11:00