Mirror
/
ardupilot
mirror of https://github.com/ArduPilot/ardupilot
5
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
3,664 Commits 71 Branches 509 Tags 780 MiB
Commit Graph

3664 Commits

Author SHA1 Message Date
Andrew Tridgell a54d6f744e HWSTATUS: if we don't know the voltage, report it as zero 
this will tell us if board_voltage() is really working
 2012-03-10 10:34:28 +11:00
Andrew Tridgell 9393b21a8d ACM: adjust yaw drift correction constants 
this should give the compass a bit more authority
 2012-03-10 10:34:28 +11:00
Andrew Tridgell 8e162ec35b APM: fixed reset of control switch when short_fs_action is disabled 
When FS_SHORT_ACTN is 0, we should not re-read the control switch
unless we changed mode on the initial short fs action
 2012-03-10 10:34:28 +11:00
Andrew Tridgell d03b11092b SITL: separate out drift speed and drift level 2012-03-10 10:34:28 +11:00
Andrew Tridgell 71d3847bfc SITL: added a drift_level multiplier 
this makes it easier to experiment with different gyro drift levels
 2012-03-10 10:34:28 +11:00
Andrew Tridgell 61ebcfe9fe DCM: fixed the averaging of accel values for update_DCM_fast() 
this should improve drift correction for ArduCopter
 2012-03-10 10:34:28 +11:00
Andrew Tridgell de32c3bc31 AP_Math: added a .zero() method to Vector3f 2012-03-10 10:34:28 +11:00
Andrew Tridgell a0e2e69431 SITL: fixed delay() to account for signal interrupions 
when a timer went off we stopped the delay() code
 2012-03-10 10:34:28 +11:00
Andrew Tridgell 37ab76c9e6 DCM_Test: fixed example code to work with SITL 
this also fixes the compass setup
 2012-03-10 10:34:27 +11:00
Andrew Tridgell d2a969ee95 SITL: push noise level to 2.0 for DCM testing 2012-03-10 10:34:27 +11:00
Andrew Tridgell 506b91a587 autotest: run fg viewers with less CPU priority 2012-03-10 10:34:27 +11:00
Andrew Tridgell 65b26619d4 autotest: added CMAC test circuit 
this is what I am using for noise testing
 2012-03-10 10:34:27 +11:00
Andrew Tridgell 79b8ddc236 DCM: added a small amount of accel smoothing to update_DCM_fast() 2012-03-10 10:34:27 +11:00
Andrew Tridgell b07a3eb966 ACM: added SIMSTATE, DCM and HWSTATUS messages to ACM 2012-03-10 10:34:27 +11:00
Andrew Tridgell 55413bfcc1 DCM: don't use the z accel sensor for drift correction 
the z accel is the noisest, and seems to do more harm than good. Using
just x and y is sufficient for drift correction by assuming the vector
length
 2012-03-10 10:34:27 +11:00
Andrew Tridgell a78b00513b DCM: added a small amount of gyro and accel smoothing 
possibly not needed, but convenient to be able to test with different
values
 2012-03-10 10:34:27 +11:00
Andrew Tridgell 46c91fa0c4 APM: added logging of DCM, HWSTATUS and SIMSTATE 2012-03-10 10:34:27 +11:00
Andrew Tridgell 82032b17a9 DCM: added reporting interfaces for DCM state 2012-03-10 10:34:27 +11:00
Andrew Tridgell ae6a94a933 SITL: added sitl_simstate_send() 
used to report simulator state in logs
 2012-03-10 10:34:27 +11:00
Andrew Tridgell d106e3a970 MAVLink: import new message types DCM, HWSTATUS and SIMSTATE 2012-03-10 10:34:27 +11:00
Andrew Tridgell 4e354a9731 DCM: got rid of _error_roll_pitch from object state 
this can be a local error variable in common with the yaw code. This
saves 12 bytes in the object.
 2012-03-10 10:34:27 +11:00
Michael Oborne f399ada86f APM Planner 1.1.50 
rename messagebox to custommessagebox
mag calibration now working. > hardware setup tab
 2012-03-09 23:18:12 +08:00
Jason Short 13e9608fb8 Consolidated Barometer pressure sensing to a single filter based on Randy's new filter class. 2012-03-08 23:13:04 -08:00
Jason Short df812dd78a temp remove filter for quad motors during testing. It's unlikely this filter did anything at all to be honest. 2012-03-06 22:23:06 -08:00
Jason Short 43b3e1ccd1 ACM - 
Implemented automatic ranging of Alt Hold gains. Works well in simulator and testing.
- alt hold estimation moved to 50 hz
- simple fixed observer calc for smooth and accurate climb rates useful for derivative calcs
- auto-reset of the I term by moving I value into throttle value. This recalcs the gain every 20seconds for battery drainage compensation in long flights.
- remove filtering for Nav_throttle
- added a way to lower the gain on nav_throttle for descents by / climb_rate error by 2 - seems to work OK and keeps copter from dropping like a rock when the Baro drifts quickly lower.
- removed old throttle hold set point code
- made throttle override for alt hold +- 200 vs 250
 2012-03-06 22:22:14 -08:00
Jason Short 5117ddff26 ACM: Updated config values 2012-03-06 22:12:24 -08:00
Jason Short 34cf1e8fb3 Updated on Barometer - increased the Temp filtering and decreased the pressure filtering to and get less temp noise, faster response from pressure. I'm filtering the Climb rate differently now, so this higher pressure noise should not hurt the derivative calcs at all now. 2012-03-06 20:55:35 -08:00
Michael Oborne 9e7b19f466 APM Planner 
Fix Updater
 2012-03-07 08:01:59 +08:00
rmackay9 8717d7dd7c ArduCopter - fix for stability patch and motor filter meant to deal with engines tendency to speed up faster than they slow down 2012-03-06 23:20:30 +09:00
rmackay9 8af43c4a19 ArduCopter - fixed typo in motor filtering for octa, octa_quad and y6 that is suppose to correct for props speeding up faster than they slow down. 2012-03-06 22:19:19 +09:00
rmackay9 29aea35eae ArduCopter - added OCTA_QUAD_FRAME to comments in APM_Configh.h to help user select frame when compiling with arduino 2012-03-06 22:15:02 +09:00
Michael Oborne 0d842c5554 APM Planner 1.1.49 
mode TUNE_ param scale
add mavlink tlog graphing
mod tracker options
 2012-03-06 18:27:43 +08:00
Jason Short fe5612d38b Added define for throttle range for altitude changes, updated it to 250 2012-03-05 22:12:53 -08:00
rmackay9 6c1299fe7e AP_RC - removed unused library 2012-03-04 18:21:52 +09:00
Michael Oborne 91ba8fdb83 planner cleanup 2012-03-04 08:49:45 +08:00
Michael Oborne e06a0d81db APM Planner 1.1.48 
Add ThemeManager - re andrew
Add CustomMessageBox - re andrew and me
few mono fixs
mono tts working (speech)
 2012-03-04 08:42:42 +08:00
Robert Lefebvre a7e0fc7774 Added support for TradHeli H1 swashplate type. Added new param heli_h1_swash_enabled. 
Signed-off-by: Robert Lefebvre <robert.lefebvre@gmail.com>
 2012-03-03 08:14:14 -05:00
Michael Oborne 064e060264 APM Planner 1.1.47 
fix Updater
 2012-03-03 15:42:41 +08:00
Michael Oborne 49a097a8f1 APM Planner 1.1.46 
update to request extra3 stream.
 2012-03-02 18:40:20 +08:00
Andrew Tridgell dd9065123c SITL: use the new noise model 
use the new noise model at a low level for master until we sort out
DCM noise handling
 2012-03-02 18:31:07 +11:00
Andrew Tridgell 3745dfd59f ACM: use g.rc_speed for all APM_RC.SetFastOutputChannels calls 2012-03-02 17:57:08 +11:00
Andrew Tridgell 91c3f993b4 ACM: set default RC fast speed to 400Hz 2012-03-02 17:57:08 +11:00
Andrew Tridgell bfca928211 ACM: added RC_SPEED MAVLink parameter 
this will set the speed for APM_RC.SetFastOutputChannels()
 2012-03-02 17:57:08 +11:00
Andrew Tridgell 63ea5dfb49 APM_RC: allow the fast RC speed to be passed as a parameter 
this will allow users to test different speeds
 2012-03-02 17:57:08 +11:00
Andrew Tridgell 1e2b57410c ACM: fixed Parameters.h to avoid duplicate keys 
unfortunately everyone needs to reload
 2012-03-02 15:48:28 +11:00
Andrew Tridgell f1a389fe19 AP_Param: ensure we can't have duplicate keys in Parameters.h 
this is O(n^2), but only at startup, and takes less than 1ms to run.
It catches a very nasty coding error
 2012-03-02 15:48:28 +11:00
Andrew Tridgell fcb1b9ba95 ACM: added board_voltage() 2012-03-02 15:48:28 +11:00
Andrew Tridgell 82dd1cd7ce APM: added board_voltage() function 2012-03-02 15:48:27 +11:00
Andrew Tridgell 1476f044e6 I2C: added lockup_count() interface 
used for reporting I2C problems
 2012-03-02 15:48:27 +11:00
Andrew Tridgell c9031f1d36 SITL: implement cli()/sei() properly for desktop build 
this disables simulated hardware interrupts during critical sections
 2012-03-02 15:48:27 +11:00