Randy Mackay
d8bc197d35
SITL: add VICON_GLIT_XYZ, FAIL and YAW
...
glitches are in meters in vicon's frame
fail disables sending of vision-position-estimate messages
yaw is the vicon's heading in degrees. i.e. if vicon's "forward" is
pointing to the east, yaw should be set to 90
2020-04-28 12:31:14 +09:00
Mark Whitehorn
db1c7d9bdd
SITL: add support for AHRS_ORIENTATION=ROTATION_CUSTOM
2020-04-28 10:57:26 +10:00
Willian Galvani
cf6f5502a4
SITL: Make Sub buoyancy a parameter
2020-04-27 12:48:52 -07:00
Randy Mackay
3ccb3c69a6
SITL: add vicon position offsets
2020-04-14 10:28:03 +10:00
Andrew Tridgell
778532d556
SITL: added SIM_GPS2_HDG and rationalise the GPS position variables
2020-04-11 21:14:31 +10:00
Samuel Tabor
5082c9be8b
SITL: Add plane-soaring type, including parameters, mission, simulated thermals and glider sim settings.
2020-04-08 09:11:54 +10:00
Andrew Tridgell
09b272b840
SITL: added SIM_LED_LAYOUT parameter
...
for layout of simulated LEDs
2020-02-27 13:12:26 +11:00
Andy Piper
2033cf3b4a
SITL: add SIM_VIB_MOT_MULT to allow motor noise to have a different amplitude to the fixed frequency noise
2020-02-22 11:15:37 +11:00
Siddharth Purohit
8a7dcafa0f
SITL: add parameter MAG_DEVID in SITL
2020-02-19 13:59:53 +09:00
Andrew Tridgell
fb3496b63b
SITL: added SIM_GPS2_POS
...
and re-arrange two sets of GPS parameters to be arrays
2020-01-26 16:55:17 +11:00
Andy Piper
a6a020b3c7
SITL: record throttle value instead of motors on/off
2019-12-31 10:34:02 +11:00
Andy Piper
c807267bab
SITL: add rpm-based motor noise per-motor to gyros and accels
...
convert multicopter thrust to rpm per motor
2019-12-17 10:07:06 +11:00
Andrew Tridgell
7b203f6816
SITL: added SIM_MAG_SCALING for testing scale factor errors
2019-12-03 20:48:23 +11:00
Peter Barker
326ba5b974
SITL: support for virtual hardware safety switch
2019-11-26 10:14:11 +11:00
Andrew Tridgell
4d50996780
SITL: added MegaSquirt EFI simulation
2019-11-17 20:10:54 +11:00
Andrew Tridgell
ae289052e9
SITL: added LED state
2019-11-04 13:01:59 +11:00
Peter Barker
47fbf70e85
SITL: create SITL tonealarm files to hold enable parameter
2019-10-16 16:00:35 +11:00
Peter Barker
32ec6d7e9a
SITL: add a simulated buzzer
2019-10-16 16:00:35 +11:00
Andrew Tridgell
3d9f393f4b
SITL: added SIM_LOOP_DELAY parameter
...
this allows us to test high CPU load conditions by adding a delay to
each loop
2019-09-19 18:25:20 +10:00
Peter Barker
169013cae2
SITL: allow starting location to come from parameters
2019-08-15 18:00:35 +10:00
Peter Hall
2a3676003a
SITL: sailboat add tide
2019-08-07 14:34:07 +09:00
Peter Hall
90bf224e7f
SITL: sailboat add wave simulation and parameters
2019-08-07 14:34:07 +09:00
Grant Morphett
2ce7955614
SITL: Create gps_hdt_enabled varible for enable/disable HDT GPS sentence
2019-07-13 11:05:57 +10:00
Peter Barker
a966c75deb
SITL: remove unused forward declaration of AP_Logger
2019-07-09 10:57:20 +10:00
Peter Barker
e01ea2f5f9
SITL: support a count of baros
2019-07-09 10:01:23 +10:00
Peter Barker
6939a9fa91
SITL: add capability to twist the aircraft
...
This makes the EKF very, very unhappy, but is useful for compass
calibration testing
2019-04-23 10:06:17 +10:00
Andrew Tridgell
e18f40cc08
SITL: added IMU failure masks
2019-04-22 14:56:30 +10:00
Paul Riseborough
8ac8c7285b
SITL: Add parameter for optical flow sensor noise
2019-04-02 10:51:12 +11:00
Peter Barker
4db011f530
SITL: add SIM_SHOVE_* options to shove the simulated vehicle
...
The parameter values are time in milliseconds and body-frame
acceleration in m/s/s
So to test throw mode:
mode throw
param set SIM_SHOVE_Z -30
arm throttle
param set SIM_SHOVE_TIME 500
2019-03-12 11:09:37 +11:00
Pierre Kancir
04bc267a61
SITL: add precland object
...
add position for precland object
add refresh rate
add alt and lateral range
add diffusion range
2019-03-01 20:28:22 +11:00
Peter Barker
44bc035f7b
SITL: allow testing of throttle-goes-to-low-fixed-value rc failsafes
2019-02-14 11:49:59 +11:00
Tom Pittenger
a4e91e196f
SITL: unify singleton naming to _singleton and get_singleton()
2019-02-10 19:09:58 -07:00
Andrew Tridgell
56683ba803
SITL: added SIM_BAUDRATE_EN parameter
2019-01-27 08:56:12 +11:00
Peter Barker
b47733142f
GLOBAL: rename DataFlash_Class to AP_Logger
2019-01-18 18:08:20 +11:00
Peter Barker
834b45ce18
SITL: stop taking DataFlash pointer as argument
2019-01-18 11:16:54 +11:00
Peter Barker
e3c719b27f
SITL: adjust for Location_Class and Location unification
2019-01-16 11:45:29 +11:00
Peter Barker
d3b9ac5c8c
SITL: add simulated parachute
...
Doesn't actually change aerodynamics at the moment
2019-01-09 13:16:03 +11:00
Andrew Tridgell
9ca059ba16
SITL: added SIM_VIB_FREQ parameter
2019-01-08 06:49:02 +11:00
Andrew Tridgell
f52af1fc40
SITL: added parsing of variable length vectors for Morse
...
used for laser scanner
2018-12-04 18:29:41 +11:00
Andrew Tridgell
0536a3c4c6
SITL: added SIM_WOW_PIN
2018-11-09 14:35:14 +11:00
Pierre Kancir
37f7cc4bcf
SITL: rearrange Grippers and Sprayers in SITL
2018-07-31 23:34:43 +10:00
Andrew Tridgell
128ea42286
SITL: added SIM_RC_CHANCOUNT parameter
2018-07-24 19:44:03 +10:00
Andrew Tridgell
d1f67f6ded
SITL: added diagonal, off-diagonal and orientation of SITL compass
2018-07-18 16:07:19 +10:00
Peter Barker
19fd133ef8
SITL: correct compilation for transitive include fail
2018-05-29 14:42:02 +10:00
Peter Barker
a137afd11b
SITL: add singleton
2018-05-23 18:36:50 +10:00
Eugene Shamaev
d086edc762
SITL: add wind type parameters
2018-05-02 07:32:25 -07:00
Peter Barker
e7b5978d8d
SITL: use a 16-bit mask for GPIO out
2018-04-18 20:31:55 +09:00
Peter Barker
08189e0754
SITL: add parameter for Vicon observation delay
2018-03-27 20:28:53 +09:00
Eugene Shamaev
6954a0035a
SITL: SITL of several airspeed sensors
2018-03-09 11:27:20 -08:00
Nicholas Engle
1103e92884
SITL: Add SIM_WIND_DIR_Z parameter for SITL
...
This controls the vertical pitch of the 3d wind vector, allowing futher control of the wind
using systems like dronekit. This change directly effects the calcuation of the wind vector
2018-02-05 16:38:53 -08:00